Optical instrumentation
MDL-405(FC): 405 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Power stability, linewidth, beam quality
MDL-405(FC)405 nm violet high-power CW laser
405 nmMDL-405(FC) is a 405 nm CW laser. 2-in-1 laser and fiber combiner. Key specifications: output / average power 1 mW~30 W. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MDL-405(FC)
2 specification rows
| Wavelength | 405 nm |
|---|---|
| Output / average power | 1 mW~30 W |
| Beam / notes | 2-in-1 laser and fiber combiner |
Series-level technical context
Engineering context for a thin CW Lasers record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 12 wavelength-near cw lasers records; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 1~80 mW
- • Output / average power: 1~50 mW
- • Output / average power: 1~30 mW
- • Operating mode: CW
- • Spectral linewidth: <0.000005 nm (<10 MHz) Coherent length >30m
Beam-quality tolerance context
Nearby series records state M²: <1.2, M²: <1.5, M²: <1.1, and Beam divergence, full angle (mrad): <1. These are series context, not guaranteed values for MDL-405(FC); confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Laser source and internal thermal control
- Step 2Configured fiber launch or integrated pigtail
- Step 3Mode- and connector-matched patch lead
- Step 4Collimator, isolator or experiment input
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
MDL-405(FC): Laboratory measurement benefits from a stable, focusable source. 405 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MDL-405(FC) with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
Related cw lasers
Compare the MDL-405(FC) with nearby cw lasers across the wavelength range.
