Measurement
MDL-XF-1060: Measurement benefits from a stable, focusable source. 1060 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (Multimode) informs waist size and propagation.
Power stability, linewidth, beam quality
MDL-XF-10601060 nm near-infrared CW laser
1060 nmMDL-XF-1060 is a 1060 nm CW laser. Used for measurement, communication, spectrum analysis. High Stability Infrared Laser. Key specifications: output / average power 2.5~5 W, operating mode CW, transverse mode Multimode. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MDL-XF-1060
16 specification rows
| Output / average power | 2.5~5 W |
|---|---|
| Beam / notes | High Stability Infrared Laser |
| Operating mode | CW |
| Transverse mode | Multimode |
| Beam divergence, full angle (mrad) | <3.0 |
| Warm-up time (minutes) | <5 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 1060±10 |
| Output power (mW) | 2500-5000 |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Dimensions of beam at the aperture (mm) | ~5×8 |
| Beam height from base plate (mm) | 37 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Communication
MDL-XF-1060: 1060 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
Spectrum analysis
MDL-XF-1060: 1060 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (Multimode) also controls focusing and collection geometry.
System integration
Integration and compatibility
Use these checks to connect MDL-XF-1060 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Cooled method: Air cooled · Operating temperature (℃): 10-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: Multimode · Beam divergence, full angle (mrad): <3.0
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
- Mechanical envelope
- Dimensions of beam at the aperture (mm): ~5×8
- Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Technical FAQ
Integration questions for MDL-XF-1060
What cooling does the MDL-XF-1060 require?
Cooled method: Air cooled · Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the MDL-XF-1060 deliver?
Transverse mode: Multimode · Beam divergence, full angle (mrad): <3.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
How is the MDL-XF-1060 mounted?
Dimensions of beam at the aperture (mm): ~5×8. Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MDL-XF-1060 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MDL-XF-1060 (current) | MDL-1060(FC) | FC-1060 |
|---|---|---|---|
| Wavelength | 1060 nm | 1060 nm | 1060 nm |
| Optical power / pulse energy | 2.5~5 W | 1~2000 mW | 1~20 W |
| Operating mode / pulse width | CW | CW | Confirm for this model |
| Beam quality | Multimode | Multimode | Confirm for this model |
Related cw lasers
Compare the MDL-XF-1060 with nearby cw lasers across the wavelength range.
