Power stability, linewidth, beam quality
MDL-C-410 is a 410 nm CW laser. Used for flow cytometry, dna sequencing, medical imaging, holography. Coherent Length (m): >1. Key specifications: output / average power 1~50 mW, power stability <1%, coherence length >1. View specifications, datasheet and enquiry options from Precisometer.
Specifications
4 specification rows
| Wavelength | 410 nm |
|---|---|
| Output / average power | 1~50 mW |
| Power stability | <1% |
| Beam / notes | Coherent Length (m): >1 |
| Coherence length | >1 |
Series-level technical context
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 11 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Nearby series records state M²: <1.1, Beam divergence, full angle (mrad): <1.0, Beam divergence, full angle (mrad): ~2.5×0.2, and Beam divergence, full angle (mrad): <1.5. These are series context, not guaranteed values for MDL-C-410; confirm them on the order-specific datasheet.
Application context
Applications named on a datasheet for this product line, interpreted against this model’s listed wavelength and beam data.
MDL-C-410: 410 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
MDL-C-410: 410 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
MDL-C-410: 410 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
MDL-C-410: 410 nm emission determines compatible optics, coatings and detectors for Holography. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MDL-C-410 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MDL-C-410 (current) | TUN-403~406 Wavelength tunable | MDL-E-405 |
|---|---|---|---|
| Wavelength | 410 nm | 410 nm | 410 nm |
| Optical power / pulse energy | 1~50 mW | 1~30 mW | 1~50 mW |
| Operating mode / pulse width | Confirm for this model | CW | CW |
| Beam quality | Confirm for this model | Near TEM00 | Multimode |
Compare the MDL-C-410 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide