Optical instrumentation
TEM-F-760: 760 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
Power stability, linewidth, beam quality
TEM-F-760760 nm near-infrared CW laser
760 nmTEM-F-760 is a 760 nm CW laser. High Stability Red Laser; TEM 00. Key specifications: output / average power 1~150 mW, operating mode CW, power stability (rms, 4 hours ± 3°c) <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
TEM-F-760
16 specification rows
| Output / average power | 1~150 mW |
|---|---|
| Beam / notes | High Stability Red Laser; TEM 00 |
| Operating mode | CW |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Warm-up time (minutes) | <5 |
| Operating temperature (°C) | 25±3 |
| Power supply (100-240VAC) | PSU-III-FDA/PSU-III-LED/PSU-A-D |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 760±10 |
| Transverse mode | TEM00 |
| Ellipticity | >0.95 |
| M² | <1.1 |
| Beam diameter at the aperture (1/e2, mm) | ~1.0 |
| Beam divergence, full angle (mrad) | <1.5 |
| Beam height from base plate (mm) | 25 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
TEM-F-760: Laboratory measurement benefits from a stable, focusable source. 760 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
System integration
Integration and compatibility
Use these checks to connect TEM-F-760 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature (°C): 25±3
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: TEM00 · M²: <1.1
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for TEM-F-760
What cooling does the TEM-F-760 require?
Operating temperature (°C): 25±3. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the TEM-F-760 deliver?
Transverse mode: TEM00 · M²: <1.1. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare TEM-F-760 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
Related cw lasers
Compare the TEM-F-760 with nearby cw lasers across the wavelength range.
