Back to Home

Power stability, linewidth, beam quality

CW-760-840760 nm near-infrared CW laser

760 nm

The CW-760-840 is a 760 nm continuous-wave Ti:sapphire laser. An optical pump excites titanium ions in a sapphire crystal. Their broad gain spectrum allows the resonator to select and tune the output wavelength within the specified range. Tuning changes the selected output wavelength so spectral features can be scanned with the same source. The tuning band specifies which lines can be reached; linewidth describes the width of the selected line.

Specifications

CW-760-840

21 specification rows

Output / average power1~3000 mW
Beam / notesTunable Red Laser
Operating modePulsed
Single pulse energy (nJ)0.1-0.6
Rep. rate (MHz)80±2
Ave power stability (rms, 4 hours±3℃)<2%, <1%
pulseduration, / high
Warm-up time (minutes)<10
Transverse modeTEM00
M2 factor<1.2
Polarization ratio>100:1 Vertical
Cooled methodAir cooled
Operating temperature (℃)10-35
Power supply (100-240VAC)12V/6.67A
Expected lifetime (hours)>10000
Frequency doublerLASER HEAD (780) / POWER SUPPLY
Wavelength (nm)760-840
Power stability (rms, 4 hours±3℃)<3%, <2%
Beam divergence, full angle (mrad)<4
Beam diameter at the aperture (1/e2,mm)<3
Beam height from base plate (mm)82

What do you need?

Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare CW-760-840 with the closest available models in the CW Lasers family.

Selection parameterCW-760-840 (current)CW-760-840CW-760-840
Wavelength760 nm775 nm786 nm
Optical power / pulse energy1~3000 mW1~3000 mW1~3000 mW
Operating mode / pulse widthPulsedPulsedPulsed
Beam qualityTEM00TEM00TEM00