Flow cytometry
PGL-VI-445: 445 nm emission can be matched to the absorption or excitation band used in Flow cytometry. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
Power stability, linewidth, beam quality
PGL-VI-445445 nm violet CW laser
445 nmPGL-VI-445 is a 445 nm CW laser. Used for flow cytometry, dna sequencing, medical imaging, spectrum analysis. PGL-VI-445/ 1~80mW. Key specifications: output / average power 1~80 mW, operating mode CW, transverse mode Near TEM00. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PGL-VI-445
14 specification rows
| Wavelength | 445 nm |
|---|---|
| Output / average power | 1~80 mW |
| Beam / notes | PGL-VI-445/ 1~80 mW |
| Operating mode | CW |
| Transverse mode | Near TEM00 |
| Beam diameter at the aperture(1/e2) (mm) | ~4.5 |
| Beam divergence, full angle (mrad) | <1 |
| Expected lifetime (hours) | 10000 |
| Operating voltage(internal PCB) | 6VDC |
| Connection | Cable with flying leads |
| Operating temperature | 0°C to 40°C |
| Storage temperature | -20°C to 80°C |
| Humidity | <90%, non-condensing |
| Dimensions of internal PCB mm | Φ12×50 |
| Dimensions of internal PCB1 mm | Φ15×90 |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
DNA sequencing
PGL-VI-445: 445 nm emission can be matched to the absorption or excitation band used in DNA sequencing. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
Medical imaging
PGL-VI-445: 445 nm emission can be matched to the absorption or excitation band used in Medical imaging. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
Spectrum analysis
PGL-VI-445: 445 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (Near TEM00) also controls focusing and collection geometry.
System integration
Integration and compatibility
Use these checks to connect PGL-VI-445 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature: 0°C to 40°C
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: Near TEM00 · Beam diameter at the aperture(1/e2) (mm): ~4.5
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
- Mechanical envelope
- Dimensions of internal PCB mm: Φ12×50 · Dimensions of internal PCB1 mm: Φ15×90
- Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Technical FAQ
Integration questions for PGL-VI-445
What cooling does the PGL-VI-445 require?
Operating temperature: 0°C to 40°C. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the PGL-VI-445 deliver?
Transverse mode: Near TEM00 · Beam diameter at the aperture(1/e2) (mm): ~4.5. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
How is the PGL-VI-445 mounted?
Dimensions of internal PCB mm: Φ12×50 · Dimensions of internal PCB1 mm: Φ15×90. Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare PGL-VI-445 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | PGL-VI-445 (current) | MDL-445(FC) | FC-445 |
|---|---|---|---|
| Wavelength | 445 nm | 445 nm | 445 nm |
| Optical power / pulse energy | 1~80 mW | 1~15 W | 1~30 W |
| Operating mode / pulse width | CW | CW | Confirm for this model |
| Beam quality | Near TEM00 | <1 | Confirm for this model |
Related cw lasers
Compare the PGL-VI-445 with nearby cw lasers across the wavelength range.
