Power stability, linewidth, beam quality
MLL-U-1085-SU1085 nm near-infrared CW laser
1085 nmThe MLL-U-1085-SU is a 1085 nm continuous-wave solid-state laser. Light is amplified in a solid gain medium inside an optical resonator. The resonator feeds light back through that medium to build the laser beam. The pump arrangement and cooling determine how energy is supplied and waste heat is removed. Continuous-wave operation provides a sustained beam for experiments that need steady illumination.
Specifications
MLL-U-1085-SU
19 specification rows
| Output / average power | 1~1000 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
| M2 | <1.5 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1085±1 |
| Power stability (rms, 4 hours ±3°C) | <3%, <2%, <1% |
| Spectral line width (nm) | <1.0, <0.1, (<0.006 optional@1-500) |
| M² | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | ~1.5 |
| Beam divergence (mrad) | <1.5 |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-U-1085-SU with the closest available models in the CW Lasers family.
| Selection parameter | MLL-U-1085-SU (current) | MIL-U-1085-SU | FC-1085 |
|---|---|---|---|
| Wavelength | 1085 nm | 1085 nm | 1085 nm |
| Optical power / pulse energy | 1~1000 mW | 1~1000 mW | 1~900 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.5 | <1.5 | — |
Related cw lasers
Compare the MLL-U-1085-SU with nearby cw lasers across the wavelength range.
