Back to Home

Power stability, linewidth, beam quality

TEM-LN-650650 nm red CW laser

650 nm

The TEM-LN-650 is a 650 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command.

Specifications

TEM-LN-650

18 specification rows

Output / average power1~50 mW
Beam / notesLow Noise Red Laser
Operating modeCW
Power stability (rms, 4 hours ± 3°C)<2%, <1%, <0.5%
Transverse modeTEM00
Noise of amplitude (rms, 20Hz-20MHz)<1%, <0.5%
M2<1.1
Beam divergence, full angle (mrad)<1.5
Warm-up time (minutes)<5
Operating temperature (°C)25±3
Power supply (100-240VAC)PSU-III-FDA/PSU-III-LED/PSU-A-D
Expected lifetime (hours)>10000
Central wavelength (nm)650±5
Ellipticity>0.95
M²<1.1
Beam diameter at the aperture (1/e2, mm)~1.0
Beam height from base plate (mm)25
Modulation optionDC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional

What do you need?

Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare TEM-LN-650 with the closest available models in the CW Lasers family.

Selection parameterTEM-LN-650 (current)MLL-III-650LMLL-III-650
Wavelength650 nm650 nm650 nm
Optical power / pulse energy1~50 mW1~180 mW1~1000 mW
Operating mode / pulse widthCWCWCW
Beam quality<1.1Near TEM00Multimode