Power stability, linewidth, beam quality
MLL-H-825 is a 825 nm CW laser. Used for medical imaging, flow cytometry, dna sequencing. Laser. Key specifications: output / average power 1~2500 mW, operating mode CW, transverse mode Multimode. View specifications, datasheet and enquiry options from Precisometer.
Specifications
17 specification rows
| Output / average power | 1~2500 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Transverse mode | Multimode |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| Beam divergence, full angle (mrad) | <3.0 |
| Warm-up time (minutes) | <5 |
| Cooled method | Air cooled |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 825±5 |
| Output power (mW) | 1-2500 |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Beam diameter at the aperture (mm) | ~5×8 |
| Beam height from base plate (mm) | 29 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
MLL-H-825: 825 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
MLL-H-825: 825 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
MLL-H-825: 825 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
System integration
Use these checks to connect MLL-H-825 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Air cooled · Operating temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: Multimode · Beam divergence, full angle (mrad): <3.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MLL-H-825 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MLL-H-825 (current) | MDL-H-825 | TUN-822~837 |
|---|---|---|---|
| Wavelength | 825 nm | 825 nm | 825 nm |
| Optical power / pulse energy | 1~2500 mW | 1~2500 mW | 1~40 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | Multimode | Multimode | Near TEM00 |
Compare the MLL-H-825 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide