Power stability, linewidth, beam quality
OEM-BD-455 is a 454 nm CW laser. Used for flow cytometry, dna sequencing, medical imaging, spectrum analysis. Laser. Key specifications: output / average power 40~50 W, operating mode CW, beam divergence, full angle (mrad) ~1.2. View specifications, datasheet and enquiry options from Precisometer.
Specifications
14 specification rows
| Output / average power | 40~50 W |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Beam divergence, full angle (mrad) | ~1.2 |
| Power stability (rms, 4 hours±3℃) | <2%, <1% |
| Cooled method | Air cooled |
| Warm-up time (minutes) | <5 |
| Operating temperature (℃) | 0-30 |
| Power supply (24VDC) | PSU-PNST-OEM (24V/ 14.6A) |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 455±5 |
| Output power (W) | 40 |
| Beam diameter at the aperture (mm) | 8.5*7 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
OEM-BD-455: 454 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<2%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
OEM-BD-455: 454 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<2%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
OEM-BD-455: 454 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<2%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
OEM-BD-455: 454 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (~1.2) also controls focusing and collection geometry.
System integration
Use these checks to connect OEM-BD-455 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Air cooled · Operating temperature (℃): 0-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Beam divergence, full angle (mrad): ~1.2 · Beam diameter at the aperture (mm): 8.5*7. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare OEM-BD-455 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | OEM-BD-455 (current) | MLL-III-454L | MLL-III-454 |
|---|---|---|---|
| Wavelength | 454 nm | 454 nm | 454 nm |
| Optical power / pulse energy | 40~50 W | 1~80 mW | 1~800 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | ~1.2 | Near TEM00 | <2.1×1.6 / <2.5×0.2 |
Compare the OEM-BD-455 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide