1316 models · 228 series
261nm CW DUV Laser
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-261-B | 261 nm | 100~1500 mW | <0.2 nm | <0.5% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
266nm CW DUV Laser
7 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | M2 | Polarization ratio | Cooled method | Operating temperature | Power supply (100-240VAC) | High energy diode pumped all solid state | Beam diameter (mm) | Cooling method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-266-B | 266 nm | 1~1500 mW | – | – | – | <0.2 nm | <0.5% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-266W | 266 nm | 500~2000 mW | 10-15 uJ | 50-200 kHz | ~10 ns @50 kHz | – | – | TEM00 | – | <10 | – | 10-35 | – | 24V/13A (AO-266W-I) / 30V/18.6A (AO-266W-II) | >10000 | <3%, <2%, <1% | <1.5 | <1.2 | >100:1 Horizontal | Water cooled | – | – | – | – | – | Datasheet |
| AO-266W-HE | 266 nm | 1000 mW | 100 uJ | 10 kHz | ~12 ns | – | – | TEM00 | – | <10 | – | 10-35 | – | 24V/20.9A | >10000 | <3%, <2%, <1% | <1.5 | <1.2 | >100:1 Horizontal | Water cooled | – | – | – | – | – | Datasheet |
| AO-U-532& 266 | 266 nm | 1~3 W & 200~400 | 500~1000 uJ & 60~80 uJ | 1-10 kHz | ~10 ns @3 kHz | – | – | – | – | <10 | – | – | – | – | >10000 | <2%, <1% | <4.5 | <1.2 | >100:1 Vertical | Air cooled | 10-35 | PSU-AOM | – | – | – | Datasheet |
| EO-266W | 266 nm | 3000 mW | 60 uJ | 10-100 kHz | <5 ns | – | – | TEM00 | – | <10 | – | 15-35 | – | 24V/31.1A | >10000 | <2%, <1% | <1.5 | – | >100:1 Vertical | Water cooled | – | – | – | – | – | Datasheet |
| EO-266-Subnano -Hi | 266 nm | 1~2.5 W | 1~500 uJ | 100 Hz-10 kHz | < 1.5 ns @5 kHz ～2 ns @5 kHz | – | – | – | – | <15 | – | 15-30 | – | 24V/21A | >10000 | – | ≤3mrad | – | – | Air cooled or water cooled | – | – | Power stability (rms, 4 hours ±3℃) / <5% | ~1.5mm | – | Datasheet |
| PS-D-266 | 266 nm | 1~5 W | 0.1~4 uJ | 400 kHz-1 MHz | ~10 ps | – | – | TEM00 | – | ≥30 | – | 20-30 | – | 36V/40A | >10000 | <3%, <2%, <1% | <2 | <1.2 / <1.3 | >100:1 Horizontal (Vertical optional) | – | – | – | – | – | Water cooled | Datasheet |
320nm CW Pulse UV Laser
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-320-LN | 320 nm | 30~1500 mW | <0.003 nm | <0.5% | <1% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | Datasheet |
| UV-DP-320-B | 320 nm | 500~4000 mW | < 0.2 nm | <0.5% | – | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | DC-1kHz; TTL and Analog optional | Datasheet |
349nm CW Pulse UV Laser
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-349-LN | 349 nm | 50~2000 mW | < 0.003 MHz | <0.5% | <1% | – | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | Datasheet |
| UV-DP-349-B | 349 nm | 400~4000 mW | <0.2 nm | <0.5% | – | <1.2 | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | DC-1kHz; TTL and Analog optional | Datasheet |
355nm CW Pulse UV Laser
23 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Transverse mode | Beam divergence, full angle (mrad) | M2 | Polarization ratio | Warm-up time (minutes) | Cooled method | Operating Temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Beam diameter at the aperture (mm) | Operating temperature (℃) | Power supply (100-240VAC) | Power stability (rms, 4 hours ± 3°C) | LASER HEAD（Water Cooled） | Cooling method | Beam diameter at the aperture (1/e2, mm) | Power stability (rms, 4 hours , ±3℃) | High average power diode pumped all solid | Pointing stability over temperature (urad/℃) | Polarization | Beam diameter (mm) | Relative humidity | Power supply (110/220VAC) | Ave power stability (over 4 hours) | Power supply (220/110VAC) | Warranty period | energy | Jitter (ns, sdev) | High energy diode pumped all solid state | Energy stability (std dev/mean) | Expected lifetime (pulses) | of high single pulse energy ，short pulse | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-B-355 | 355 nm | 100~1000 mW | – | – | – | <0.04 nm | <1% | TEM00 | <5 | <1.1 / <1.2 | >100:1 Horizontal | <10 | Water cooled | 10-35 | 24V/13A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-C-355 | 355 nm | 1~2 W | – | – | – | <0.04 nm | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-D-355 | 355 nm | 2~5 W | – | – | – | <0.08 nm | <1% | – | <4.5 | <1.5 | >100:1 Horizontal | <10 | Water cooled | 10-35 | DC 36V/ 19.6A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-355 (FC) | 355 nm | 1~1500 mW | – | – | – | – | <1% | TEM00 | – | <2.0 | – | <5 | – | – | – | >10000 | ~1.5 | 10-35 | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-355 | 355 nm | 1~1000 mW | 1~50 uJ | ~20 kHz | ~3 ns | – | – | TEM00 | ~1.0 | – | >100:1 Vertical | <15 | – | – | PSU-FL-FDA (12V/25A) / PSU-FL-OEM (12V/25A) | >10000 | – | 10-35 | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-FL-355 | 355 nm | 1~1000 mW | 1~50 uJ | ~20 kHz | ~5 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Mini-E-PA-355 | 355 nm | 1000 mW | 40 uJ | ~20 kHz | ~4 ns | – | – | TEM00 | <3.5 | <1.2 | – | <15 | – | – | – | >10000 | – | 10-35 | PSU-12-P | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-355 | 355 nm | 1~1000 mW | 1~150 uJ | 1 Hz-100 kHz | ~9 ns @1 Hz-1 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-V-355 | 355 nm | 1 W/ 3 W/ 5 W | 1 mJ | 1 Hz-200 kHz | ~12 ns @1 kHz | – | – | TEM00 | <3.5 | <1.2 | >100:1 Horizontal | <10 | Air cooled or Water cooled | – | – | >10000 | – | 10-35 | PSU-AOM | <2%，<1% | POWER SUPPLY / WATER CHILLER(WCH-580) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-355A | 355 nm | 1 W/ 3 W/ 5 W | 1 mJ | 1 Hz-200 kHz | ~12 ns @1 kHz | – | – | TEM00 | <3.5 | <1.2 | >100:1 Horizontal | <10 | – | – | 12V/25A | >10000 | – | – | – | <2%, <1% | – | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-355B | 355 nm | 1 W/ 3 W/ 5 W | 1 mJ | 1 Hz-200 kHz | ~12 ns @1 kHz | – | – | TEM00 | <3.5 | <1.2 | >100:1 Horizontal | <10 | – | – | 12V/29A | >10000 | – | – | – | – | – | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-355W | 355 nm | 5 W | 1 mJ | 1 Hz-200 kHz | ~15 ns @5 kHz | – | – | TEM00 | <3.5 | <1.2 | >100:1 Horizontal | <10 | Water cooled | – | 24V/20.9A (AO-355W-I) / 12V/25A (AO-355W-II) | >10000 | – | 10-35 | – | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO- 532A & 355A | 355 nm | 1 W& 1 W | 500 uJ & 500 uJ | 1-10 kHz | ~13 ns @1 kHz | – | – | – | ~2 | – | >100:1 Horizontal | – | – | – | – | – | – | – | – | <3%,<2%, <1% | – | – | ~0.8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-355-PS | 355 nm | 1~6 W | 1~40 uJ | 1-1000 kHz | <15 ps | – | – | – | ≤3 | ≤1.5 | – | – | Water cooled | – | – | >10000 | – | 15-30 | – | – | – | – | – | <5% | Pulse duration (ps) / <15 | <50 | 100:1 | 1.5±0.5 | <60% | PSU-EO-PS | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-XS-355 | 355 nm | 1~2 W | 1~50 uJ | 1-100 kHz | ~4 ns @40 kHz | – | – | – | <3 | – | – | <10 | Air cooled | – | – | 10000 | – | 10~35 | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | PSU-AOM(3U) | 1 year | – | – | – | – | – | – | Datasheet |
| EO-355-Subnano -Hi | 355 nm | 1~3 W | 1~600 uJ | 100 Hz-10 kHz | <1.5 ns @5 kHz | – | – | – | ≤3mrad | – | – | <15 | Air cooled or water cooled | – | 24V/21A | >10000 | – | 15-30 | – | – | – | – | – | <5% | – | – | – | ~1.5mm | – | – | – | – | – | diode / pumped / all / solid | – | – | – | – | – | Datasheet |
| DPS-355-Q | 355 nm | 100-1000 mW | 1~10 mJ | 1-100 Hz (adjustable) | <10 ns | – | – | – | <3 | – | – | <15 | Water cooled | – | – | – | – | 15-30 | – | – | – | – | – | – | – | – | – | ~2 / ~2.5 / ~3 | – | PSU-DPS-Q | – | – | – | – | <1ns (Int.) | 1 | <5%, <3% | 109 | – | Datasheet |
| LPS-355-L | 355 nm | 800-2000 mW | 80~200 mJ | 1-10 Hz (adjustable) | <10 ns | – | – | – | <3 | – | – | <15 | Water cooled | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | ~7 | – | PSU-LPS-L (3U) | – | – | – | – | <1ns (Int.) | – | <5%, <3% | 107-108 | – | Datasheet |
| LPS-355-Q | 355 nm | 800-2000 mW | 80~200 mJ | 1-10 Hz (adjustable) | <10 ns | – | – | – | – | – | – | <15 | Water cooled | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | ~9 | – | PSU-LPS-Q(3U) | – | – | – | lamp / pumped / solid / state | <1ns (Int.) | – | – | 107-108 | Beam divergence, full angle (mrad) / <3 | Datasheet |
| PS-D-355-Air | 355 nm | 1~1000 mW | 1~100 nJ | 1 kHz-10 MHz | ~10 ps | – | – | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-D-355-Water | 355 nm | 1~2000 mW | 1~2000 nJ | 0.4-2 MHz | ~10 ps | – | – | TEM00 | <2 | <1.2 | >100:1 Horizontal (Vertical optional) | ≥30 | – | – | 36V/40A | >10000 | – | 20-30 | – | <2%, <1% | – | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-D-355 | 355 nm | 1~30 W | 1~30 uJ | 0.4-1 MHz | ~10 ps | – | – | TEM00 | <2 | <1.2 | >100:1 Horizontal (Vertical optional) | ≥30 | – | – | 36V/40A | >10000 | – | 20-30 | – | <2%, <1% | – | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-355 | 355 nm | 1~1500 mW | – | – | – | – | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
360nm CW Pulse UV Laser
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-360-LN | 360 nm | 100~1500 mW | <0.003 nm | <0.5% | <1% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | Datasheet |
| UV-DP-360-B | 360 nm | 400~4000 mW | <0.2 nm | <0.5% | – | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | DC-1kHz; TTL and Analog optional | Datasheet |
405nm CW Pulse Violet Blue Laser
10 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | Optical noise | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Polarization direction | Operating temperature (℃) | Warm-up time | Warranty (years) | Operating voltage(PSU-II-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Ave power stability (rms, 4 hours±3℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-405 | 405 nm | 1~1000 mW | – | – | <0.5% | <0.5% | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-405 | 405 nm | 1~3 W | – | – | <0.5% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-405 | 405 nm | 1~1000 mW | – | – | <0.5% | – | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-405 | 405 nm | 1~3 W | – | – | <0.5% | – | ~2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-405 | 405 nm | 1~4000 mW | – | – | <0.5% | – | ~2.8×0.5 / ~4.3×0.5 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | Horizontal+ Vertical / Horizontal/ Vertical | 25±3 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-405 | 405 nm | 4~16 W | – | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| YL-I-405 | 405 nm | 1~24 W | – | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL/MDL-L series | 405 nm | 1~1000 mW | – | – | <0.5% | – | – | – | – | – | – | 10000 | Near TEM00 | – | – | minutes / <10 | 1 | 7V / (TTL30kHz or Analog 0-5V,optional) | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | Datasheet |
| HPL-405-T | 405 nm | 200 uJ/ 2 W | 1~10 kHz | <15 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TUN-TiA-393-408 | 405 nm | 1~1000 mW | 10~50 kHz | ~35 ns @50 kHz | – | – | <4 | <10 | Air Cooled | – | PSU-AOM (3U) | >10000 | – | – | 15-35 | – | – | – | – | – | – | – | – | <5%, <3% | Datasheet |
473nm CW Pulse Blue Laser
5 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | M2 | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization (optional) | Fiber connector | Fiber length | Fiber Jacket | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Beam diameter at the aperture (1/e2, mm) | made features of ultra compact, long Polarization ratio | Modulation option | Fiber type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-W-473 | 473 nm | 400~2000 mW | < 0.1 nm | <1% | <3% | TEM00 | <1.3 | ~1.0 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Water Cooled | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-W-473-SM | 473 nm | 50~1000 mW | < 0.1 nm | <2% | <1% | TEM00 (single mode fiber output) | <1.1 | – | – | – | Water cooled | 10-30 | PSU-W-LED | ＞10000 | >50:1 after PM fiber | FC/APC | 1m | PVC, Metal optional | <10 | – | – | – | – | – | – | Datasheet |
| MBL-FN-473 | 473 nm | 300~1000 mW | < 0.2 nm | <1% | – | TEM00 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | <5 | <8 | PSU-SR-OEM(12V/25A) | – | – | – | – | Datasheet |
| MBL-W-473 | 473 nm | 500~2000 mW | < 0.1 nm | <1% | – | TEM00 | <1.3 | ~1.0 | – | – | – | 10-35 | PSU-W-FDA/PSU-W-LED | >10000 | – | – | – | – | – | – | – | ~2.0 | >50:1(100:1 optional), Horizontal(Vertical optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | Datasheet |
| MBL-W-473-SM | 473 nm | 50~1000 mW | < 0.1 nm | <2% | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | Air cooled / Water cooled | 10-30 | PSU-W-LED | ＞10000 | >50:1 after PM fiber | FC/APC | 1m | PVC, Metal optional | <10 | – | – | – | – | – | SM fiber (PM fiber optional) | Datasheet |
440 NM Laser, Violet Blue Laser, DPSS Laser |
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Rep. rate | Ave power stability (rms, 4 hours±3℃) | Operating temperature (℃) | Power supply (220-240AC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-440 | 440 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-H-440 | 440 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-440 | 440 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | Datasheet |
| MDL-H-440 | 440 nm | 1~3 W | <2%, <1%, <0.5% | – | 1.4×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | – | – | – | – | Datasheet |
| HPL-440-Q | 440 nm | 1~3000 mW | – | – | <3.5 | <10 | Water Cooled | – | – | >10000 | – | 5kHz | <5%, <3% | 15-35 | PSU-HPL-Q & PSU-HPL-CW | Datasheet |
| HPL-440-QM | 440 nm | 3~6 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
470nm Blue Laser, Blue Diode Laser, Diode Laser Module |
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (°C) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-470 | 470 nm | 800~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | Datasheet |
| MDL-F-470 | 470 nm | 800~1500 mW | – | Multimode | – | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | Datasheet |
| F-470-HS | 470 nm | 800~1500 mW | – | Multimode | – | ~2.5×0.5 | <5 | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | 25±3 | – | – | – | – | Datasheet |
| MDL-MD-470 | 470 nm | 1~6000 mW | <2%, <1%, <0.5% | Multimode | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | 25±3 | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | Datasheet |
| MDL-HD-470 | 470 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-470 | 470 nm | 8~16 W | – | – | – | <2.4×2.0 | <5 | – | 10-35 | PSU-N-LED/ PSU-N-FDA | 10000 | – | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
552 NM Green Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-A-552 | 552 nm | 300~2000 mW | <3%, <2% (<1% optional) | TEM00 | <2.0 | <1.5 | >100:1 Horizontal (Vertical optional) | <10 | <0.05 | WCH-580 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-W-FDA | >10000 | Datasheet |
Infrared Laser AT 2130 NM
1 model| Model | Wavelength | Output / average power | Beam divergence, full angle (mrad) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | during operations, etc. | Operating temperature (℃) | Power supply | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| OEM-IR-2130 | 2130 nm | 1~6 W | <3 | <5%, <3% | <10 | Cooled method / Water cooled | 10-30 | PSU-MIR (3U) | >10000 | Datasheet |
Infrared Laser, 1020 NM Infrared Laser Module, Infrared Diode Lasers.
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XF-1020 | 1020 nm | 500~3000 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| FC-1020 | 1020 nm | 1~8 W | – | – | – | – | – | – | – | |
| MIL-1020(FC) | 1020 nm | 1~4500 mW | – | – | – | – | – | – | – |
Infrared Laser, 1035 NM Infrared Laser Module, Infrared DPSS Lasers.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1035 | 1035 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-1035 | 1035 nm | 1~2 W | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1035 | 1035 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-1035 | 1035 nm | 1~2 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1035 | 1035 nm | 2~3 W | – | – | – | – | – | – | – | – | Datasheet |
| FC-1035 | 1035 nm | 1~8 W | – | – | – | – | – | – | – | – | |
| MIL-1035(FC) | 1035 nm | 1~4500 mW | – | – | – | – | – | – | – | – |
1105 NM Infrared Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MIL-W-1105 | 1105 nm | 500~4000 mW | Datasheet |
Infrared Diode Laser, 1130 NM Infrared Diode Lasers, High Power Diode Laser System.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1130 | 1130 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-1130 | 1130 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1130 | 1130 nm | 2~5 W | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1130 | 1130 nm | 1~13 W | – | – | – | – | – | – | – | – | – | |
| MDL-1130(FC) | 1130 nm | 1 mW~4.3 W | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 1140 NM Infrared Diode Lasers, High Power Diode Laser System.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1140 | 1140 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-1140 | 1140 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1140 | 1140 nm | 2~5 W | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1140 | 1140 nm | 1~13 W | – | – | – | – | – | – | – | – | – | |
| MDL-1140(FC) | 1140 nm | 1 mW~4.3 W | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 1150 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1150 | 1150 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1150 | 1150 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-1150(FC) | 1150 nm | 1~800 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1160 NM Infrared Lasers, High Power Diode Laser System
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XF-1160 | 1160 nm | 1~5000 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| FC-1160 | 1160 nm | 1~13 W | – | – | – | – | – | – | – | |
| MDL-1160(FC) | 1160 nm | 1 mW~4.3 W | – | – | – | – | – | – | – |
Infrared Laser, 1190 NM Infrared Laser Module, Infrared DPSS Lasers.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-1190 | 1190 nm | 1~3000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-F-1190 | 1190 nm | 1~3000 mW | – | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| FC-1190 | 1190 nm | 1~8 W | – | – | – | – | – | – | – | – | – | |
| MIL-1190(FC) | 1190 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 1208 NM Infrared Diode Lasers, High Power Diode Laser System.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1208 | 1208 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-H-1208 | 1208 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-HD-1208 | 1208 nm | 1~3500 mW | <2%, <1%, <0.5% | Multimode | – | <5 | – | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Horizontal+ Vertical | 25±3 | Datasheet |
| FC-1208 | 1208 nm | 1 mW~3 W | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-1208H | 1208 nm | 5~30 W | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-1208(FC) | 1208 nm | 1 mW~1.4 W | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1320 NM Infrared Diode Lasers,infrared Diode Laser System.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1320 | 1320 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-1320 | 1320 nm | 1~1000 mW | – | Multimode | <10 | – | – | – | – | 10000 | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-1320 | 1320 nm | 1~10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-1320H | 1320 nm | 10~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-1320(FC) | 1320 nm | 1~2600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1420 NM Infrared Diode Lasers,infrared Diode Laser System.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1420 | 1420 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-1420 | 1420 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Laser,1430 NM Infrared Diode Lasers,infrared Diode Laser System.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1430 | 1430 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-1430 | 1430 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
1480nm TEM00 Mode Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability(rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time | Expected lifetime (hours) | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PGL-V-H-1480 | 1480 nm | 1~1000 mW | <5%, <3%, <1% | Multimode | <10 | minutes / <10 | 10000 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
Infrared Laser, 1720 NM Infrared Laser Module, Infrared DPSS Lasers.
3 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1720 | 1720 nm | 1~1000 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | 10000 | 1 year | Datasheet |
| FC-1720 | 1720 nm | 1~2.5 W | – | – | – | – | – | – | – | – | |
| FC-W-1720B | 1720 nm | 20~80 W | – | – | – | – | – | – | – | – |
1834 NM IR Laser, Infrared Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M 2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | TTL/Analog modulation | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-1834 | 1834 nm | 1~1300 mW | <5%, <3% | Near TEM00 | <3.0 | <2.0 | <10 | Air Cooled | 10-35 | PSU-W-LED or PUS-W-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | >10000 | Datasheet |
Infrared Laser AT 2117 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2117 | 2117 nm | 1~2200 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
Infrared Laser AT 2128 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2128 | 2128 nm | 1~1500 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
Infrared Laser, 2600 NM Infrared Laser Module, Infrared DPSS Lasers.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Rep. rate | Single pulse energy (µJ) | Warm-up time (minutes) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2700 | 2600 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | – | – | – | Datasheet |
| TUN-W-2600~4410 | 2600 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | – | – | – | Datasheet |
| EO-XS-2600-4410 | 2600 nm | 1~1000 mW | <5%, <3% | <5 | Air cooled | 10-35 | PSU-AOM (3U) | >10000 | 30-50kHz | 1-33.3 / 1-26.7 / 1-13.3 / 1-6.7 | <10 | Datasheet |
Infrared Laser, 2800 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2800 | 2800 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Laser, 2830 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2830 | 2830 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
2910 NM MID Infrared Laser, Solid State Laser, IR Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2910 | 2910 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-PS-2910 | 2910 nm | 1~2000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
2940 NM Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2940 | 2940 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3000 | 3000 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.1 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3100 | 3100 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.2 ΜM Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3200 | 3200 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-PS-3205 | 3200 nm | 1~2000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3349nm Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3349 | 3349 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3390nm Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3390 | 3390 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.4 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3400 | 3400 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.6 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3600 | 3600 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
8.2 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-8200 | 8200 nm | 1~1300 mW |
8.6 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-8600 | 8600 nm | 1~1000 mW |
912 NM Infrared Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-FN-912 | 912 nm | 800~1000 mW | <5%, <3%, <2% | TEM00 | <1.5 | <1.2 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser, 937 NM Infrared Diode Lasers, High Power Diode Laser System.
9 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | M² | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Cooled method | Operating temperature (°C) | monitoring, | Operating voltage (VDC) | Modulation option | Output power | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-937 | 937 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TUN-918~941 | 937 nm | 1~40 mW | – | – | – | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-937L | 937 nm | 1~200 mW | – | – | – | <2%, <1%, <0.5% | Near TEM00 | <1.0 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | <1%, <0.5% | <1.5 | Conduction | 10-35 | – | – | – | – | Datasheet |
| MLL-III-937-SM | 937 nm | 1-50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-937L | 937 nm | 1~200 mW | – | – | – | <2%, <1%, <0.5% | – | <1.0 | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | – | <1.5 | Conduction | 10-35 | – | – | – | – | Datasheet |
| MDL-III-937-SM | 937 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XS-937 | 937 nm | – | High Stability Infrared Laser nm | <2%, <1%, <0.5% | 1.5 | – | Near TEM00 | <1.0 | <5 | 10-35 | – | – | >10000 | <1%, <0.5% | – | – | – | inspection | 12V/4A | AMOD (Analog) DC-100kHz | – | Datasheet |
| TEM-F-937 | 937 nm | – | High Stability Infrared Laser nm | <2%, <1%, <0.5% | – | – | TEM00 | <1.5 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | >10000 | – | <1.1 | – | 25±3 | – | – | – | – | Datasheet |
| TEM-LN-937 | 937 nm | – | Low Noise Infrared Laser nm | <2%, <1%, <0.5% | <1.1 | – | TEM00 | <1.5 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | >10000 | <1%, <0.5% | – | – | 25±3 | – | – | – | 1-50 | Datasheet |
Infrared Laser, 968 NM Infrared Diode Lasers, High Power Diode Laser System.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-968 | 968 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-968 | 968 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| FC-968 | 968 nm | 1~1300 mW | – | – | – | – | – | – | – | – | – | |
| MDL-968(FC) | 968 nm | 1~900 mW | – | – | – | – | – | – | – | – | – | |
| PGL-LF-968 | 968 nm | 1~10 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser AT 2124 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2124 | 2124 nm | 1~2500 mW | <5%, <3% | <4 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
860 NM IR Laser, Infrared Diode Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-860 | 860 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-860 | 860 nm | 1~4 W | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-III-860 | 860 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-860 | 860 nm | 1~4 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-860 | 860 nm | 4~6 W | – | – | – | – | – | – | – | – | – | Datasheet |
4.4 ΜM MID Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-4400 | 4400 nm | 1~1000 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | – | – | Datasheet |
| HPL-MIR-4400 | 4400 nm | 1~2 W | – | – | – | – | – | – | – | – | <3%, <5% | PSU-MIR (3U) | Datasheet |
4.6 ΜM MID Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-4600 | 4600 nm | 1~1500 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | – | – | Datasheet |
| HPL-MIR-4600 | 4600 nm | 1~2000 mW | – | – | – | – | – | – | – | – | <3%, <5% | PSU-MIR (3U) | Datasheet |
665nm RED Laser, RED Diode Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-665 | 665 nm | 800~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-H-665 | 665 nm | 800~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-MD-665 | 665 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | – | ~3.1×2.5 / ~2.5×2.5 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Horizontal+ Vertical / Horizontal/ Vertical | 25±3 | Datasheet |
| MDL-HD-665 | 665 nm | 1.5~3 W | <2%, <1%, <0.5% | Multimode | – | ~2.5×2.5 | <5 | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Horizontal+ Vertical | 25±3 | Datasheet |
| MDL-XD-665 | 665 nm | 3~4.5 W | <2%, <1%, <0.5% | Multimode | – | <3.5×4.0 | <5 | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Horizontal/ Vertical | 10-35 | Datasheet |
698nm Laser, RED Laser, Solid State Laser |
7 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Pointing stability over temperature (μrad/°C) | Warm-up time (minutes) | Cooled method (water cooled) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization ratio | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | Beam diameter at the aperture (1/e2, mm) | Modulation optional | Power stability (rms, 4 hours±3℃) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Beam divergence, full angle (mrad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-698 | 698 nm | 300~1000 mW | TEM00 | Single | <5MHz | <8 | <15 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-698 | 698 nm | 1~1000 mW | TEM00 | – | – | – | <5 | – | 10-35 | PSU-H-FDA | >10000 | >100:1, Horizontal (Vertical optional) | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-698 | 698 nm | 1~1200 mW | TEM00 | – | – | <8 | <5 | – | 10-35 | PSU-H-FDA/ PSU-H-LED/PSU-SR | >10000 | >100:1, Vertical (Horizontal optional) | – | – | <1.5 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MRL-FN-698-H | 698 nm | 1~1.8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-698-A | 698 nm | 1.8~3 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | 10-35 | PSU-DP-A | >10000 | – | – | – | <3.0 | – | <3%, <2%, <1% | Air Cooled | – | – | – | Datasheet |
| MRL-DP-698-B | 698 nm | 3~7 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | ~3.0 | – | <3%, <2%, <1% | – | WCH-580 | 10-35 | – | Datasheet |
| MRL-DP-698-C | 698 nm | 7~10 W | Multi mode | – | – | – | <10 | – | – | – | >10000 | – | – | 12V/ 25A | ~3.0 | – | <3%, <2%, <1% | – | WCH-580 | 10-35 | <5.0 | Datasheet |
755 NM RED Laser, RED Diode Laser |
4 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Pulse duration (ms) | Rep. rate 2 | Energy stability (std dev/mean) | Beam diameter (mm) | Operating temperature (℃) | Expected lifetime (pulses) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-755 | 755 nm | 1~1000 mW | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-H-755 | 755 nm | 1~1000 mW | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | – | – | – | – | – | – | Datasheet |
| MDL-XF-755 | 755 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-755-M | 755 nm | 1~60 W | – | – | ~20 | <15 | Water cooled | – | – | – | – | 3-5 | 1Hz | <5%, <3% | ~7 | 15-35 | 106 | Datasheet |
758 NM RED Laser, RED Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Warm-up time (minutes) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-W-758 | 758 nm | 100~4000 mW | <5%, <3% | TEM00 | <10 | <3 | Air cooled | 15-30 | RAD1PS | >10000 | Datasheet |
760 NM RED Laser, RED Diode Laser |
5 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Single pulse energy (nJ) | Rep. rate (MHz) | Ave power stability (rms, 4 hours±3℃) | pulse | M2 factor | Polarization ratio | Operating temperature (℃) | Frequency doubler | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-760 | 760 nm | 1~3000 mW | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-760 | 760 nm | 1~3000 mW | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-760 | 760 nm | 3~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| CW-760~840 | 760 nm | 1~2000 mW | TEM00 | – | – | <10 | Air cooled | – | 12V/6.67A | >10000 | – | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <1.2 | >100:1 Vertical | 10-35 | LASER HEAD (780) / POWER SUPPLY | Datasheet |
| CW-760-840 | 760 nm | 1~3000 mW | TEM00 | – | – | <10 | Air cooled | – | 12V/6.67A | >10000 | – | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <1.2 | >100:1 Vertical | 10-35 | LASER HEAD (780) / POWER SUPPLY | Datasheet |
313nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-313-B | 313 nm | 500~4000 mW | <3%, <2%, <1% / <2%, <1%, <0.5% | Near TEM00 | <3.0 | <10 | Air Cooled / WCH-580 (Water Cooled) | 10-35 | PSU-DP-A / / | / / 12V/ 25A | >10000 | Datasheet |
325nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-325-B | 325 nm | 1~1000 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
335nm UV Laser, Actively Q Switched Ultraviolet Laser
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-335-B | 335 nm | 200~1200 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
340nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-340-B | 340 nm | 1~1000 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
365 NM UV Diode Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-365-B | 365 nm | 150~1200 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
380 NM UV Diode Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Polarization direction | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-MD-380 | 380 nm | 1~1200 mW | <2%, <1%, <0.5% | Multimode | Horizontal | ~4.0×1.0 | <5 | 25±3 | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Datasheet |
| FC-380 | 380 nm | 1~10 W | – | – | – | – | – | – | – | – |
420nm Violet Blue Laser, Diode Laser, Violet Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-420 | 420 nm | 500~1300 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| H-420 | 420 nm | 500~1300 mW | – | – | – | – | – | – | – | – | – |
577 NM Yellow Laser, Solid State Laser, Yellow Laser Module |
5 models| Model | Wavelength | Output / average power | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Transverse mode | M2 | Operating voltage (VDC) | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2, mm) | Modulation option | Storage temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-577 | 577 nm | 600~1200 mW | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-577-A | 577 nm | 1.2~4 W | <10 | >100:1, Horizontal (Vertical optional) | – | – | 10-35 | – | – | >10000 | <5%, <3% | TEMn1 | <1.5 | 100-240V | – | – | – | – | – | Datasheet |
| MGL-W-577A | 577 nm | 1.2~5 W | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | 10-35 | – | PSU-W-LED | >10000 | – | Near TEM00 | – | – | <3%, <2%, (<1% optional) | <1.5 | ~5.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | Datasheet |
| OEM-S-577-MD | 577 nm | 1~1000 mW | – | – | <10 | – | – | – | – | >10000 | – | TEMn1 | – | – | – | – | – | – | 0-60 | Datasheet |
| MGL-N-577-AOM | 577 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
435 NM Blue Violet Laser
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MLL-H-435 | 435 nm | 500~4000 mW | Multimode | <2.5×0.2 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-435 | 435 nm | 500~4000 mW | Multimode | <2.5×0.2 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
454 NM Blue Violet Diode Laser.
11 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | Operating voltage (VAC) | Power supply (24VDC) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-454 | 454 nm | 800~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-454 | 454 nm | 800~2000 mW | <2%, <1%, <0.5% | Multimode | – | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-454 | 454 nm | 1~8000 mW | <2%, <1%, <0.5% | Multimode | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Horizontal+ Vertical / Horizontal/ Vertical | 25±3 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-454 | 454 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-454 | 454 nm | 8~16 W | – | – | – | <2.4×2.0 | <5 | – | – | PSU-N-LED/ PSU-N-FDA | 10000 | Horizontal+Vertical | 10-35 | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | – | – | – | – | – | – | – | – | Datasheet |
| YL-I-455 | 454 nm | 1~40 W | – | – | – | – | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | 100, 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | 100-240 | – | – | Datasheet |
| OEM-BD-455 | 454 nm | 40~50 W | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | <2%, <1% | – | PSU-PNST-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | Datasheet |
| OEM-ED-455 | 454 nm | 50~60 W | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | <2%, <1% | – | PSU-PNST-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | Datasheet |
| OEM-AD-455 | 454 nm | 70~90 W | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | <2%, <1% | – | PSU-PNDT-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | Datasheet |
| FC-454 | 454 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-455C | 455 nm | 30~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
457 NM Blue Laser.
3 models| Model | Wavelength | Output / average power | Power stability | Optical noise | M² | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Spectral line width (nm) | Polarization ratio | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Low Noise | 457 nm | 350-1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-457 | 457 nm | 1-1000 mW | – | <0.5% | – | <2%, <1%, <0.5% | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MLL-F-457 | 457 nm | 350-1000 mW | <3%, <2%, <1% | – | <2.0 | – | – | <5 | – | 10-35 | PSU-H-FDA | >10000 | <0.1 | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | Datasheet |
460nm Blue Laser
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-460 | 460 nm | 800~15000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | Datasheet |
| MDL-F-460 | 460 nm | 800~1500 mW | – | Multimode | – | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | Datasheet |
| MDL-MD-460 | 460 nm | 1~6000 mW | <2%, <1%, <0.5% | Multimode | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | 25±3 | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | Datasheet |
| MDL-HD-460 | 460 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-460 | 460 nm | 8~16 W | – | – | – | <2.4×2.0 | <5 | – | 10-35 | PSU-N-LED/ PSU-N-FDA | 10000 | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| YL-I-460 | 460 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-460 | 460 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-460C | 460 nm | 30~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-460H-II | 460 nm | 50~200 W | – | – | – | – | – | – | – | – | – | – | – | – | – |
462 NM Blue Violet Diode Laser.
11 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (°C) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | Power stability(rms, over 4 hours) | Warm-up time | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-462 | 462 nm | 800~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-462 | 462 nm | 800~1500 mW | – | – | – | – | – | – | – | PSU-H-LED/ PSU-H-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| F-462-HS | 462 nm | 800~1500 mW | – | Multimode | – | ~2.5×0.5 | <5 | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | 25±3 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-462 | 462 nm | 1~6000 mW | <2%, <1%, <0.5% | Multimode | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | 25±3 | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-462 | 462 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-462 | 462 nm | 8~16 W | – | – | – | <2.4×2.0 | <5 | – | 10-35 | PSU-N-LED/ PSU-N-FDA | 10000 | – | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-462 | 462 nm | 1~2000 mW | – | Multimode | – | <3×0.5 | – | – | – | – | 10000 | – | – | – | – | months / 1 | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-462 | 462 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-462C | 462 nm | 30~40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-462H-II | 462 nm | 50~200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-462(FC) | 462 nm | 1~14 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
465 NM Blue Violet Diode Laser.
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (°C) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-465 | 465 nm | 800~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | Datasheet |
| MDL-F-465 | 465 nm | 800~1500 mW | – | – | – | – | – | – | – | PSU-H-LED/ PSU-H-FDA | – | – | – | – | – | – | Datasheet |
| F-465-HS | 465 nm | 800~1500 mW | – | Multimode | – | ~2.5×0.5 | <5 | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | 25±3 | – | – | – | – | Datasheet |
| MDL-MD-465 | 465 nm | 1~6000 mW | <2%, <1%, <0.5% | Multimode | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | 25±3 | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | Datasheet |
| MDL-HD-465 | 465 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-465 | 465 nm | 8~16 W | – | – | – | <2.4×2.0 | <5 | – | 10-35 | PSU-N-LED/ PSU-N-FDA | 10000 | – | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| YL-I-465 | 465 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-465 | 465 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-465(FC) | 465 nm | 1~13500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
488 NM Blue Diode Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-DF-488 | 488 nm | 300-1000 mW | <5%, <3% | <5 | >100:1 | <10 | 15-30 | PSU-AOM (3U) | >10000 | Datasheet |
High Power Laser |
24 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | Ave power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (220-240AC) | Expected lifetime (hours) | Single pulse energy (mJ) | Power stability (rms, 4 hours±3℃) | Warm-up time(minutes) | Power supply (220VAC) | Macro-Pulse duration (us) | Macro-Rep. rate | Micro-Pulse duration (ns) | Power stability (rms) | Power supply (110/220VAC) | Expected lifetime (pulses) | Single pulse energy (nJ) | pulse | Transverse mode | M2 factor | Polarization ratio | Power supply (100-240VAC) | Frequency doubler | Pulse duration | Pulse duration (ns) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HPL-1064-CW | 1064 nm | 50-100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1319-CW | 1319 nm | 20-50 W | – | – | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-CW | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-PA | 532 nm | 1~10 W | 0.2 kHz | ~10 ns @200 Hz | – | – | – | – | Water cooled | 15-35 | – | >10000 | 1-50 | <5%, <3% | <10 | PSU-HPL-PA*3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-PB | 532 nm | 1~25 W | 0.5 kHz | ~10 ns @500 Hz | – | – | – | – | Water cooled | 15-35 | – | >10000 | 1-50 | <5%, <3% | <10 | PSU-HPL-PB*3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-Q | 532 nm | 20-30 W | 10-20 kHz | ~100 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-QM | 532 nm | 30-100 W | 10-20 kHz | ~100 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-QL | 532 nm | 100-200 W | 15 kHz | ~100 ns | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 556 | 556 nm | 20-50 W | 10-20 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 589 | 589 nm | 1-50 W | 4 / 14 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| LGS-589.159-PS | 589.159 nm | 1-25 W | 100±1 MHz | Macro <160 us Micro <1 ns | – | – | – | <15 | Water cooled | 15-35 | – | – | – | – | – | – | <160 | 500Hz | <1 | <5%, <3% | PSU-LGS-PS | 109 | – | – | – | – | – | – | – | – | – | Datasheet |
| 660 | 660 nm | 1-50 W | 5 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-660-QM | 660 nm | 50-100 W | 10-20 kHz | ~150 ns | – | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q*2 & PSU-HPL-CW*2 | >10000 | 10-20 | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1064 | 1064 nm | 1-4 W | 0.2 kHz | – | – | <2%, <1% | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | – | – | – | 0.1-0.6 | duration, / high | TEM00 | <1.2 | >100:1 Vertical | 12V/6.67A | LASER HEAD (780) / POWER SUPPLY | – | – | Datasheet |
| HPL-1064B-PA | 1064 nm | 4-20 W | 0.2 kHz | ~10 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-1064A-PB | 1064 nm | 1-10 W | 0.5 kHz | ~10 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-1064B-PB | 1064 nm | 10-60 W | 0.5 kHz | ~10 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-1064-Q | 1064 nm | 50-100 W | 10-20 kHz | ~100 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW*2 | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1064-QM | 1064 nm | 100-300 W | 10-20 kHz | ~300 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW*2 | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1319 | 1319 nm | 20-50 W | 10-20 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1319-QM | 1319 nm | 50-100 W | 10-20 kHz | ~250 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW*2 | >10000 | 5-10 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1319-Q | 1319 nm | 20-50 W | 10-20 kHz | – | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | 2-5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-556-Q | 556 nm | 20-50 W | 10-20 kHz | – | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | 2-5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~100 | – | Datasheet |
| HPL-589-Q | 589 nm | 1-50 W | 4 / 14 kHz | – | <3%, <2%, <1% | – | <3 | <15 | Water cooled | 15-35 | – | >10000 | – | – | – | – | – | – | – | – | PSU-HPL-Q-I/PSU-HPL-Q-II | – | – | – | – | – | – | – | – | – | 150±50 | Datasheet |
| HPL-660-Q | 660 nm | 1-50 W | 5 kHz | – | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15~35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | 1-10 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~150 | Datasheet |
Infrared Laser, 1047 NM Infrared Laser Module, Infrared DPSS Lasers.
7 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Beam diameter at the aperture (1/e2, mm) | Power stability (rms, 4 hours , ±3°C) | Power stability (rms, over 4 hours) | Warm-up time(minutes) | M2 factor | Pointing stability after warm-up(mrad) | Cooled method | Operating temperature (℃) | Power supply (90-264VAC) | Warranty period | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1047-SU | 1047 nm | 1~1000 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1047 | 1047 nm | 1~1000 mW | TEM00 | <1% | <1.5 | – | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-H-1047 | 1047 nm | 1~1000 mW | TEM00 | – | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | ~1.2 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-U-1047-SU | 1047 nm | 1~4 W | TEM00 | – | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | ~1.0 | <3%, <2%, <1% | – | – | – | – | – | – | – | – | Datasheet |
| MIL-V-1047 | 1047 nm | 4~8 W | Near TEM00 | – | – | >100:1 | – | – | – | – | 10000 | – | – | – | – | <1%, <2%,<3% | <10 | <2.0 | <0.05 | Air cooled | 10~35 | PSU-AOM (3U) | 1 year | Datasheet |
| FC-1047 | 1047 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-1047(FC) | 1047 nm | 1~7200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1053 NM Infrared Laser Module, Infrared DPSS Lasers.
8 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Power stability (rms, 4 hours , ±3℃) | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours) | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Relative intensity noise (rms,10Hz-3MHz) | Pointing stability (urad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1053-SU | 1053 nm | 1~1500 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1053 | 1053 nm | 1~1500 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1053-LN-L | 1053 nm | 1~10 W | TEM00 | – | <1.1 | – | <30 | – | – | – | >10000 | – | – | <2%, <1%, <0.5% | SLM | 1-100% | <0.004 | <0.1%, <0.05% | <±200 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | Air cooled or Water cooled | 15-30 | 110/220VAC | – | – | Datasheet |
| FL-1053-LN-H | 1053 nm | 10~35 W | TEM00 | – | TEM00, <1.1 | – | <30 | – | – | – | >10000 | – | – | <1%, <0.5% | SLM | 1-100% | <0.004 | – | – | Collimator | <3 | Metal | 4±1 (Collimator output) | >15, after PM fiber | Air cooled (≤20W) / Water cooled (≤35W) | 15-30 | 110/220VAC | <0.1%, <0.05% | <5 / <10 | Datasheet |
| FC-1053 | 1053 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-1053(FC) | 1053 nm | 1~7200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-H-1053 | 1053 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-U-1053-SU | 1053 nm | 1.5~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1085 NM Infrared Laser Module,infrared Lasers.
2 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1085-SU | 1085 nm | 1~1000 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | Datasheet |
| MIL-U-1085-SU | 1085 nm | 1~1000 mW | TEM00 | – | <1.5 | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | ~1.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser, 1112 NM Infrared Laser Module,infrared Lasers.
2 models| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power Stability (rms, 4 hours ± 3°C) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-U-1112-SU | 1112 nm | 500~2000 mW | TEM00 | <1.5 | ~1.0 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | Datasheet |
| MIL-T-1112 | 1112 nm | 1200~7000 mW | TEM00 | <1.5 | – | <10 | 10-35 | – | PSU-W-FDA/PSU-W-LED | >10000 | <3%, <2%, (<1% optional) | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Air cooled | Datasheet |
Infrared Laser, 1122 NM Infrared Laser Module,infrared Lasers.
4 models| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1122 | 1122 nm | 1~1000 mW | TEM00 | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
| MIL-U-1122-SU | 1122 nm | 1000~1200 mW | TEM00 | <1.5 | ~1.0 | – | – | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
| FC-1122 | 1122 nm | 1~1080 mW | – | – | – | – | – | – | – | – | – | – | |
| MIL-1122(FC) | 1122 nm | 1~6300 mW | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1342 NM DPSS Infrared Laser, Infrared Laser Pointer.
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Longitudinal mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Spectral line width (nm) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Operating temperature (°C) | Power supply (90-264VAC) | Expected lifetime (hours) | Warm-up time (minutes) | Power supply (100-240VAC) | Power supply (12VDC) | Beam divergence (mrad) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-1342 | 1342 nm | 500~5000 mW | <3%, <2%, <1% | TEM00 | Single | <0.5% | <1.3 | ~1.5 | >100:1, Vertical (Horizontal optional) | <5MHz | <8 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-1342-SU | 1342 nm | 1~2000 mW | – | TEM00 | – | <1% | <1.2 | ~1.5 | >100:1, Horizontal (Vertical optional) | – | – | – | 10-35 | – | >10000 | <5 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | – | – | – | – | – | Datasheet |
| MLL-H-1342 | 1342 nm | 1~2000 mW | – | TEM00 | – | <1% | <1.5 | – | >100:1, Horizontal (Vertical optional) | <0.1 | – | – | 10-35 | – | >10000 | <5 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | <2.0 | – | – | – | – | Datasheet |
| MIL-H-1342 | 1342 nm | 1~2000 mW | – | TEM00 | – | – | <1.5 | – | >100:1, Horizontal (Vertical optional) | – | – | – | 10-35 | – | >10000 | <5 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-U-1342-SU | 1342 nm | 2~3 W | – | TEM00 | – | – | <1.5 | ~1.0 | – | – | – | – | 10-35 | – | >10000 | <5 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-N-1342 | 1342 nm | 3~4 W | – | Near TEM00 | – | – | 3-6 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | 10-35 | – | >10000 | <10 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | Datasheet |
| MIL-V-1342 | 1342 nm | 1~6 W | – | TEM00 | – | – | ＜1.3 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | 10-35 | – | >10000 | <10 | PSU-W-LED | – | – | – | <3%, <2%, (<1% optional) | <3.0 | <20 | Datasheet |
| FC-1342 | 1342 nm | 1~2700 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-1342(FC) | 1342 nm | 1~5500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1450 NM Infrared Diode Lasers,infrared Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1450 | 1450 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1450 | 1450 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| FC-1450 | 1450 nm | 1~10 W | – | – | – | – | – | – | – | – | – |
Infrared Laser,1550 NM Infrared Diode Lasers, Infrared Laser System.
5 models| Model | Wavelength | Output / average power | Power stability(rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time | Expected lifetime (hours) | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PGL-V-H-1550 | 1550 nm | 1~2000 mW | <5%, <3%, <1% | Multimode | <10 | minutes / <10 | 10000 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| MDL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-N-1550 | 1550 nm | 1~3.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-W-1550 | 1550 nm | 100~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1645 NM Infrared Solid State Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-N-1645 | 1645 nm | 1~1000 mW | <5%, <3% | Near TEM00 | <3 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Diode Laser AT 1910 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-N-1910 | 1910 nm | 1~2000 mW | <2%, <1% | Near TEM00 | <2 | <10 | Air Cooled | 15-30 | PSU-H-LED or PSU-H-FDA | >10000 | Datasheet |
| MIL-W-1910 | 1910 nm | 1~13 W | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser AT 1985 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-N-1990 | 1985 nm | 1~2000 mW | <2%, <1% | Near TEM00 | <2 | <10 | Air Cooled | 15-30 | PSU-H-LED or PSU-H-FDA | >10000 | Datasheet |
| MIL-W-1990 | 1985 nm | 1~11 W | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser AT 2000 NM.
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XF-2000 | 2000 nm | 300~1000 mW | Multimode | <5.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| FC-2000 | 2000 nm | 1~2000 mW | – | – | – | – | – | – | – |
Infrared Laser AT 2096 NM
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Ave power stability (rms, 4 hours±3℃) | Rep.rate (kHz) | Single pulse energy (µJ) | Power supply | during operations, etc. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2096 | 2096 nm | 1~2500 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | – | – | – | – | – | Datasheet |
| OEM-AO-2096 | 2096 nm | 1~15 W | – | <5 | – | Water cooled | 10-30 | – | >10000 | <5%, <3% | 10 | 100-1500 | PSU-MIR (3U) | – | Datasheet |
| OEM-IR-2096 | 2096 nm | 1~20 W | <5%, <3% | <3 | <10 | – | 10-30 | – | >10000 | – | – | – | PSU-MIR (3U) | Cooled method / Water cooled | Datasheet |
Infrared Diode Laser AT 3800 NM.
1 model| Model | Wavelength | Output / average power | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|
| MIL-W-3800 | 3800 nm | 250~2800 mW | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Diode Laser, 793 NM Infrared Diode Lasers, High Power Diode Laser System.
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-793 | 793 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-III-793 | 793 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-H-793 | 793 nm | 2500~4000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | Datasheet |
| OEM-I-793-BG | 793 nm | 200 W | – | – | – | – | <5 | Air cooled | – | – | >10000 | 200, 0.22NA | SMA905 | 4m | PVC, Metal optional | <2%, <1%, <0.5% | -30-60 | 100-240 | Datasheet |
| FC-793 | 793 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-793 | 793 nm | 5~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-793H | 793 nm | 50~100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-793(FC) | 793 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 825 NM Infrared Diode Lasers.
4 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-825 | 825 nm | 1~2500 mW | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
| MDL-H-825 | 825 nm | 1~2500 mW | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | Datasheet |
| MDL-III-825 | 825 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | |
| MLL-III-825 | 825 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 880 NM Infrared Diode Lasers.
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-880 | 880 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-880 | 880 nm | 1~2 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-880 | 880 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-880 | 880 nm | 1~2 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| FC-880 | 880 nm | 1~4 W | – | – | – | – | – | – | – | – | – | |
| FC-W-880 | 880 nm | 20~50 W | – | – | – | – | – | – | – | – | – | |
| FC-W-880H | 880 nm | 50~500 W | – | – | – | – | – | – | – | – | – | |
| MDL-880(FC) | 880 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser, 885 NM Infrared Diode Lasers.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-885 | 885 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-885 | 885 nm | 1~2 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-885 | 885 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-885 | 885 nm | 1~2 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| PGL-V-H-FC-885 | 885 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | |
| FC-W-880/885A | 880 nm | 4~50 W | – | – | – | – | – | – | – | – | – | |
| MDL-885(FC) | 885 nm | 1~1200 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser, 905 NM Infrared Diode Pulse Lasers, High Power Diode Laser System.
15 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | Operating temperature (℃) | Parameters of customed power supply | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-905 | 905 nm | 1~60 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-905L | 905 nm | 1~70 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | – | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-905 | 905 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-905-SM | 905 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-905 | 905 nm | 1~60 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-905L | 905 nm | 1~70 mW | <2%, <1%, <0.5% | Near TEM00 | – | – | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-905 | 905 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-905-SM | 905 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-P-905 | 905 nm | >130 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-905 | 905 nm | 1~10 mW | – | – | – | – | – | – | -10°C to +45°C | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-905 | 905 nm | 1~70 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-905 | 905 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ12×50 | – | – | Datasheet |
| TUN-902~923 | 905 nm | 1~40 mW | <3%, <2%, <1% | Near TEM00 | – | – | <1.0 | <5 | – | PSU-TUN | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | 20-30 | TEC: 7-12kΩ | Datasheet |
| MDL-NS-905 | 905 nm | 1~150 mW | <2%, <1%, <0.5% | Near TEM00 | – | – | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-905 | 905 nm | 1~30 mW | <2%, <1%, <0.5% | Near TEM00 | – | – | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
914 NM Infrared Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-U-914-SU | 914 nm | 800~1700 mW | <3%, <2%, <1% | TEM00 | <1.5 | ~1.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser, 946 NM Infrared Laser Module, DPSS Infrared Lasers.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam divergence (mrad) | Polarization ratio | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-U-946-SU | 946 nm | 800~1500 mW | <3%, <2% | TEM00 | <1.5 | ~1.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | Datasheet |
| MIL-W-946 | 946 nm | 1.5~5 W | – | TEM00 | <1.5 | ~1.2 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <2.0 | >100:1, Horizontal (Vertical optional) | Datasheet |
| FC-946 | 946 nm | 1~1350 mW | – | – | – | – | – | – | – | – | – | – | |
| MIL-946(FC) | 946 nm | 1~4500 mW | – | – | – | – | – | – | – | – | – | – |
607 NM RED Laser.
6 models| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Operating temperature (°C) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Fiber connector | Fiber jacket | Fiber length | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-607 | 607 nm | 200~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-607-H | 607 nm | 800~1800 mW | TEM00 | <1.2 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-607-A | 607 nm | 1.8~2 W | Near TEM00 (TEM00 optional) | – | – | <10 | – | – | PSU-DP-A | >10000 | <3%, <2%, <1% | <3.0 | Air Cooled | 10-35 | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-607-B | 607 nm | 2~3.5 W | Near TEM00 (TEM00 optional) | – | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | <3%, <2%, <1% | ~3.0 | – | – | WCH-580 | 10-35 | – | – | – | – | – | Datasheet |
| MRL-DP-607-C | 607 nm | 3.5~7.5 W | Multi mode | – | <5.0 | <10 | – | – | – | >10000 | <3%, <2%, <1% | ~3.0 | – | – | WCH-580 | 10-35 | 12V/ 25A | – | – | – | – | Datasheet |
| MRL-FN-607-SM | 607 nm | 1~1000 mW | TEM00 | <1.2 | – | <10 | 10-35 | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | <3%, <2%, <1% | – | – | – | – | – | – | FC/APC | PVC | 1m | DC-1kHz; TTL and Analog optional | Datasheet |
635 NM RED Diode Laser.
6 models| Model | Wavelength | Output / average power | Spectral line width (nm) | Power stability (rms, 4 hours ± 3°C) | Fiber | linewidth, short coherent length, long | Transverse mode | M2 after fiber | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-E-635 | 635 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | |
| MDL-HD-635 | 635 nm | 1.5~3 W | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-635 | 635 nm | 1~1000 mW | ~5 | <2%, <1%, <0.5% | 1m | Fiber jacket / Metal, PVC optional | TEM00 | ~1.1 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-MD-635 | 635 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-635 | 635 nm | 3~8 W | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-635 | 635 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – |
671 NM RED Laser.
7 models| Model | Wavelength | Output / average power | Transverse mode | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Beam diameter at the aperture (1/e2, mm) | Power Stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | measurement, holography, laser printing, chip | Polarization ratio (optional) | Fiber type | Fiber core diameter | Fiber connector | Fiber length | Fiber Jacket | Cooled method | Modulation option | Pointing stability over temperature (μrad/°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-FN-671 | 671 nm | 500~1000 mW | TEM00 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-671 | 671 nm | 1~1.5 W | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <3%, <2%, <1% | <0.1 | ~3.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-671 | 671 nm | 1.5~5 W | TEM00 | >50:1(>100:1 optional),Vertical(Horizontal optional) | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | – | – | <3%, <2%, (<1% optional) | <1% | <1.3 | <1.5 | <20 | Cooled method / Water Cooled | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-671-SM | 671 nm | 250~3000 mW | TEM00 (single mode fiber output) | – | <10 | – | 10-30 | PSU-W-LED | – | ＞10000 | – | – | – | <3%, <2%, (<1% optional) | <1% | <1.1 | – | – | – | >50:1 after PM fiber | SM fiber (PM fiber optional) | 4um,0.10NA | FC/APC | 1m | PVC, Metal optional | Air Cooled (Water Cooled optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | Datasheet |
| MRL-FN-671 | 671 nm | 500~1000 mW | TEM00 | >100:1, Vertical (Horizontal optional) | <5 | – | 10-35 | PSU-H-FDA/ PSU-H-LED/PSU-SR | – | >10000 | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <8 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-V-671 | 671 nm | 1~5 W | TEM00 | >50:1(>100:1 optional), Vertical(Horizontal optional) | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | – | – | <3%, <2%, (<1% optional) | – | <2.0 | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-V-671-SM | 671 nm | 100~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
680 NM RED Diode Laser.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-680 | 680 nm | 1~1500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MDL-III-680 | 680 nm | 1~1500 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Datasheet |
| FC-680 | 680 nm | 1~2 W | – | – | – | – | – | – | – | – | – |
690 NM RED Diode Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-690 | 690 nm | 1~1300 mW | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-690 | 690 nm | 1~1300 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-690 | 690 nm | 1~1000 mW | – | – | <6 | – | – | – | – | 10000 | Multimode | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-690 | 690 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-690(FC) | 690 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
721 NM RED Laser.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Longitudinal mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Spectral line width (nm) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Operating temperature (°C) | Power supply (90-264VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-721 | 721 nm | 300~1000 mW | <3%, <2%, <1% | TEM00 | Single | <0.5% | <1.3 | ~1.5 | >100:1, Vertical (Horizontal optional) | <5MHz | <8 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | Datasheet |
| MRL-FN-721 | 721 nm | 800~1000 mW | – | TEM00 | – | – | <1.5 | – | – | – | – | – | – | – | >10000 | <2%, <1%, <0.5% | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | Datasheet |
| MRL-FN-721-H | 721 nm | 1~2 W | – | TEM00 | – | – | <1.5 | – | – | – | – | – | – | – | >10000 | <2%, <1%, <0.5% | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | Datasheet |
| MRL-DP-721-A | 721 nm | 1~3.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-721-B | 721 nm | 3.5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-721-C | 721 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
729 NM RED Laser.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| CW-729 | 729 nm | 1~2000 mW | |
| MRL-FN-729-H | 729 nm | 500~1000 mW |
747 NM RED Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Cooled method (Water Cooled) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-747-H | 747 nm | 500-1000 mW | <3%, <2%, <1% | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | Datasheet |
| MRL-DP-747-B | 747 nm | 1~2 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | ~3.0 | WCH-580 | 10-35 | Datasheet |
Infrared Laser,750 NM Infrared Diode Lasers,infrared Diode Laser System.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-750 | 750 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-750 | 750 nm | 2~5 W | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-750 | 750 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-750 | 750 nm | 2~5 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-750 | 750 nm | 1~1500 mW | – | Multimode | – | <5 | – | – | – | – | 10000 | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-750 | 750 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-750(FC) | 750 nm | 1~4000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
810 NM RED Laser.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| CW-810 | 810 nm | 1~1000 mW | |
| MSL-Ti-CW-810 | 810 nm | 1~1000 mW |
536 NM Green Laser, Green Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Polarization ratio | Warm-up time (minutes) | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-A-536 | 536 nm | 500~4000 mW | <3%, <2% (<1% optional) | TEM00 | <1.5 | >100:1 Horizontal (Vertical optional) | <10 | <0.05 | WCH-580 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-W-FDA | >10000 | Datasheet |
545 NM Green Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Storage temperature (℃) | Power Stability (rms, 4 hours ± 3°C) | M2 | Pointing Stability Over Temperature (urad/°C) | Operating temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-545 | 545 nm | 1~1000 mW | <3%, <2%, <1% | TEM00 | <1.5 | >100:1, Vertical (Horizontal Optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-DP-545-B | 545 nm | 1~3.5 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | <5.0 | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | 2.0 | >100:1 Horizontal(Vertical optional) | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | – | – | – | – | – | Datasheet |
| OEM-S-545-MD | 545 nm | 1~1000 mW | – | TEMn1 | – | – | <10 | – | – | – | >10000 | – | – | – | – | – | 0-60 | – | – | – | – | Datasheet |
| MGL-FN-543 | 543 nm | 1~1000 mW | <3%, <2%, <1% | TEM00 | <1.5 | >100:1, Vertical (Horizontal Optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-543 | 543 nm | 1~1.5 W | – | TEM00 | – | – | <10 | – | – | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | – | <3%, <2%, (<1% optional) | <3.0 | <20 | 10-35 | Datasheet |
780 NM Infrared Laser.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Pulse duration (ns) | Ave power stability (rms, 4 hours±3℃) | Operating temperature (℃) | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-780(FC) | 780 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-780 | 780 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-780 | 780 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-780 | 780 nm | 2~4 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-780 | 780 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-780 | 780 nm | 2~4 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TUN-TiA-770-840 | 770 nm | 1~2500 mW | – | – | <3.5 | <10 | – | – | 12V/25A | >10000 | – | <40 | <5%, <3% | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UN-Ti-CW-760-840 | 760 nm | 1~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UN-Ti-740-840 | 740 nm | 1~7000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-780-LN-L | 780 nm | 1~2000 mW | – | TEM00 | – | <30 | Air cooled or Water cooled | – | – | >10000 | – | – | – | 15-30 | 1-2000 | 1-500 | <2%, <1% | SLM | 1-100% | <0.002 | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | Datasheet |
1270nm DFB Laser, Infrared Laser, DPSS Laser |
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | ultra compact, long lifetime, | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1270(FC) | 1270 nm | 1~4500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1270 | 1270 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1270 | 1270 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-1270H | 1270 nm | 5~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1270-CW | 1270 nm | 1~1000 mW | – | – | – | <15 | Air cooled | – | – | >10000 | – | <3%, <2%, <1% | >±5nm | M2 / <1.3 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | 15-35 | 110/220VAC | Datasheet |
1610nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|
| MIL-W-1600 | 1600 nm | 100~2000 mW | <5%, <3% | Air Cooled | Datasheet |
1700 NM IR Laser, Infrared Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|
| MIL-W-1700 | 1700 nm | 100~3000 mW | <5%, <3% | Air Cooled | Datasheet |
Infrared Diode Laser AT 1940 NM.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | made features of ultra compact, long lifetime | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-1930 | 1930 nm | 1~15 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-N-1940 | 1940 nm | 1~2000 mW | <2%, <1% | Near TEM00 | Polarizaion ratio | <2 | <10 | Air Cooled | 15-30 | PSU-H-LED or PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-W-1940 | 1940 nm | 1~11 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1940-CW | 1940 nm | 1~100 W | – | – | – | – | – | Air cooled (≤30W) / Water cooled (>30W) | 15-35 | – | >10000 | <2%, <1%, <0.5% | <2nm | <1.5 | Collimator | 1 | PVC, Metal optional | ~7mm (Collimator outptut) | Random | 110/220VAC | Datasheet |
976 NM Infrared Laser.
17 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Operating temperature (℃) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Modulation option | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | Fiber length (m) | Beam diameter (mm) | Polarization ratio | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-976 | 976 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-976 | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976 | 976 nm | 1~2500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-976 | 976 nm | 2.5~5 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-976 | 976 nm | 5~8 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | 10-35 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976-SM | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| TEM-F-976 | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976 | 976 nm | 1~2500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-976 | 976 nm | 2.5~5 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-976 | 976 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-976 | 976 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976-SM | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-976-A | 976 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-976-B | 976 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-976 | 976 nm | 20~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-976H | 976 nm | 50~150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-976-CW | 976 nm | 1~2 W | – | – | <1.2 | – | <15 | – | – | >10000 | – | Air cooled | 15-35 | – | – | FC/APC, Collimator optional | PVC, Metal optional | – | <3%, <2% | <0.3nm | 1 | 4±1 (Collimator output) | Random | 110/220VAC | Datasheet |
638 NM RED Diode Laser.
25 models| Model | Wavelength | Output / average power | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | customers’ equipment. Cooled method | Storage temperature (℃) | Modulation option | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YL-I-638 | 638 nm | 1~40 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/525 | 638 nm | 2.9 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/450 | 638 nm | 6 W | – | – | – | – | – | – | – | – | – | |
| YL-I-638/525/450 | 638 nm | 11 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/980/1550 | 638 nm | 13 W | – | – | – | – | – | – | – | – | – | |
| YL-I-638/808/980 | 638 nm | 15 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/980/1064 | 638 nm | 16 W | – | – | – | – | – | – | – | – | – | |
| YL-I-638/525/450/1064/1470 | 638 nm | 55 W | – | – | – | – | – | – | – | – | – | |
| YLI-638/808/980/1470 | 638 nm | 62 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/525/450/808/1550 | 638 nm | 66 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/525/450/980/808 | 638 nm | 71 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/525/450/808/1064 | 638 nm | 74 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| YL-I-638/808/980/1064 | 638 nm | 118 W | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | Air cooled | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
| FC-W-638/525C | 638 nm | 2.9 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/450C | 638 nm | 6 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/525/450C | 638 nm | 11 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/980/1064C | 638 nm | 11 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/980/1550C | 638 nm | 12 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/808/980C | 638 nm | 15 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/525/450/1064/1470C | 638 nm | 55 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/808/980/1470C | 638 nm | 62 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/525/450/808/1550C | 638 nm | 66 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/525/450/980/808C | 638 nm | 71 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/525/450/808/1064C | 638 nm | 74 W | – | – | – | – | – | – | – | – | – | |
| FC-W-638/808/980/1064C | 638 nm | 118 W | – | – | – | – | – | – | – | – | – |
642 NM RED Laser, RED Diode Laser, RED Laser Module |
2 models650 NM RED Laser, RED Diode Laser, RED Laser Module |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-650 | 650 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-III-650 | 650 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-MD-650 | 650 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-HD-650 | 650 nm | 1.5~3 W | <2%, <1%, <0.5% | Multimode | – | ~2.5×2.5 | <5 | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Horizontal+ Vertical | 25±3 | Datasheet |
| MDL-XD-650 | 650 nm | 3~4.5 W | – | – | – | – | – | – | – | – | – | – | – |
375 NM UV Diode Laser.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Polarization direction | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber Core Diameter (um) | Fiber Connector | Power stability (rms, over 4 hours) | Modulation option | Cooling Way | Dimensions(mm3) | Warranty | FC-W-375H-II (Water Cooled) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-375 | 375 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-375 | 375 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | Horizontal | ~8.0×0.5 | <5 | 25±3 | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-375C | 375 nm | 5~10 W | – | – | – | – | <5 | 10-40 | – | 10000 | 400, 600… | SMA905/ FC/ QBH | <1% | TTL/ Analog 1Hz-30KHz, TTL on/ off | Air Cooled | 447 (L)×483.4 (W)×148 (H)mm3 | 1 year | – | Datasheet |
| FC-W-375H-II | 375 nm | 10~20 W | – | – | – | – | <5 | 10-40 | – | 10000 | 400, 600… | SMA905/ FC/ QBH | <1% | TTL/ Analog 1Hz-30KHz, TTL on/ off | Water Cooled | 518 (L)×450 (W)×147.5 (H)mm3 | 1 year | Water Chiller (WCH-370) (Optional) | Datasheet |
400 NM Blue Violet Diode Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-400 | 400 nm | 1~3 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-400 | 400 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-400 | 400 nm | 1~3 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-400 | 400 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-400 | 400 nm | 1~3 W | <2%, <1%, <0.5% | Multimode | – | ~2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
442 NM Blue Violet Diode Laser.
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Transverse mode | Operating temperature (℃) | Polarization direction | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-442(FC) | 442 nm | 1~3500 mW | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | Datasheet |
| FC-442 | 442 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-442 | 442 nm | 80~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | Datasheet |
| MLL-F-442 | 442 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | Multimode | 10-35 | – | Datasheet |
| MDL-III-442 | 442 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | Datasheet |
| MDL-F-442 | 442 nm | 1~4 W | – | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | Multimode | 10-35 | – | Datasheet |
| MDL-MD-442 | 442 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | Multimode | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | Datasheet |
| MDL-HD-442 | 442 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-442 | 442 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – |
445 NM Blue Violet Diode Laser.
14 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Transverse mode | Operating temperature (℃) | Polarization direction | Power stability(rms, over 4 hours) | Beam diameter at the aperture(1/e2) (mm) | Warm-up time minutes | Connection | Operating voltage(PSU-V-OEM) | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-445(FC) | 445 nm | 1~15 W | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-445 | 445 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-445 | 445 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-445 | 445 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | Multimode | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-445 | 445 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.5×1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-445 | 445 nm | 1~4 W | – | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | Multimode | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-445 | 445 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | Multimode | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-445 | 445 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-445 | 445 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| YL-I-445 | 445 nm | 1~40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| OEM-I-445 | 445 nm | 1~13 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-H-445 | 445 nm | 1~1000 mW | – | – | <1 | – | – | – | – | 10000 | – | Near TEM00 | – | – | <5%, <3%, <1% | ~4.5 | <10 | Cable with flying leads | 100-240VAC(TTL30kH and Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | Datasheet |
| FC-W-445C | 445 nm | 30~50 W | – | – | – | <5 | Air cooled | – | – | >10000 | – | – | 0-30 | – | – | – | – | – | – | – | – | – | – | 100, 200, 400, 600, 0.22NA | SMA905, FC optional | 1m | PVC, Metal optional | <2%, <1% | 100-240 | Datasheet |
| FC-W-445H-II | 445 nm | 50~200 W | – | – | – | <5 | Water cooled | – | – | >10000 | – | – | 0-30 | – | – | – | – | – | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC, QBH optional | 1m | PVC, Metal optional | <2%, <1%, <0.5% | 100-240 | Datasheet |
447 NM Blue Violet Diode Laser.
13 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Operating temperature (℃) | Transverse mode | Polarization direction | Power stability(rms, over 4 hours) | Connection | Operating voltage(PSU-V-OEM) | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Modulation optional | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-447(FC) | 447 nm | 1~15 W | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-447 | 447 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-447 | 447 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-447 | 447 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-447 | 447 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-447 | 447 nm | 1~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-447 | 447 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | 25±3 | Multimode | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-447 | 447 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-447 | 447 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-H-447 | 447 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | Near TEM00 | – | <5%, <3%, <1% | Cable with flying leads | 100-240VAC(TTL30kH and Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-447 | 447 nm | 1~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | 9 pin connector | 100-240VAC | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | TTL30kHz and Analog 0-5V | – | – | – | – | – | – | Datasheet |
| FC-W-447C | 447 nm | 30~50 W | – | – | – | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | – | – | – | 100, 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | <2%, <1% | 100-240 | Datasheet |
| FC-W-447H-II | 447 nm | 50~200 W | – | – | – | <5 | Water cooled | – | – | >10000 | – | 0-30 | – | – | – | – | – | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC, QBH optional | 1m | PVC, Metal optional | <2%, <1%, <0.5% | 100-240 | Datasheet |
450 NM Blue Violet Diode Laser.
18 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Operating temperature (℃) | Transverse mode | Polarization direction | Fiber Core Diameter (um) | Fiber Connector | ultra-compact design, a long lifetime, and Fiber Jacket | Modulation option | Power supply (90-264VAC) | Warranty | Power stability(rms, over 4 hours) | Connection | Operating voltage(PSU-V-OEM) | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Modulation optional | Fiber lengths | Fiber Jacket | Power stability (rms, 4 hours±3℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-450(FC) | 450 nm | 1~15 W | <2%, <1%, <0.5% | <1.5 / <1.2 | <1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-450 | 450 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-450 | 450 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-450 | 450 nm | 1~4 W | <2%, <1%, <0.5% | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-450 | 450 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-450 | 450 nm | 1~4 W | – | – | 1.4×0.2 / 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | 10-35 | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-450 | 450 nm | 1~8000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | 25±3 | Multimode | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-450 | 450 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-450 | 450 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| YL-I-450 | 450 nm | 1~200 W | – | – | – | – | – | – | – | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | PVC, Metal optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-DH-450 | 450 nm | 15-30 W | – | – | – | <5 | – | – | – | 10000 | – | 25+/-3 (OEM-DH-450) / 10-35 (OEM-DH-450-Water) | – | – | – | – | – | – | PSU-H-LED | 1 year | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-H-450 | 450 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | – | – | – | <5%, <3%, <1% | Cable with flying leads | 100-240VAC(TTL30kH and Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | Datasheet |
| PGL-V-H-450 | 450 nm | 1~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | 9 pin connector | 100-240VAC | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | TTL30kHz and Analog 0-5V | – | – | – | – | Datasheet |
| FC-W-450C | 450 nm | 30~50 W | – | – | – | <5 | Air cooled | – | – | >10000 | – | 0-30 | – | – | 100, 200, 400, 600, 0.22NA | SMA905, FC optional | – | – | – | – | – | – | – | – | – | – | – | – | 1m | PVC, Metal optional | <2%, <1% | 100-240 | Datasheet |
| FC-W-450H-II-50W | 450 nm | 50 W | – | – | – | <5 | Water cooled | – | – | >10000 | – | 0-30 | – | – | 105, 0.22NA | SMA905 | – | – | – | – | – | – | – | – | – | – | – | – | 2.5m | PVC, Metal optional | <2%, <1%, <0.5% | 100-240 | Datasheet |
| FC-W-450H-II-100W | 450 nm | 100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-450H-II-200W | 450 nm | 200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-450H-II-500W | 450 nm | 500 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
520 NM Green Laser.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | Power stability (rms, 4 hours±3℃) | Power supply (24VDC) | Modulation option | Free space output power (mW) | Fiber coupled output power (mW) | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Operating voltage (VAC) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-520 | 520 nm | 800~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | ~4.0×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-520 | 520 nm | 800~1000 mW | <2%, <1%, <0.5% | Multimode | – | ~4.0×0.5 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-MD-520 | 520 nm | 1-2 W | <2%, <1%, <0.5% | Multimode | – | ~2.2×1.2 / ~2.1×1.2 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Horizontal+ Vertical / Horizontal/ Vertical | 25±3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-HD-520 | 520 nm | 2~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-520 | 520 nm | 4~10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| YL-I-520 | 520 nm | 1~70 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| OEM-JD-520 | 520 nm | 30~55 W | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | <2%, <1% | PSU-PNDT-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-AD-520 | 520 nm | 55~60 W | – | – | – | ~1.2 | <5 | Air cooled | – | – | >10000 | – | 0-30 | <2%, <1% | PSU-PNDT-OEM (24V/ 14.6A) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL/ Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-520-SLM | 520 nm | 1~2000 mW | – | TEM00 | – | – | <30 | Air cooled or Water cooled | – | – | >10000 | – | 15-30 | – | – | – | 1-2000 | 1-500 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | – | – | Datasheet |
| FL-520-LN-L | 520 nm | 1~2000 mW | – | TEM00 | – | – | <30 | Air cooled or Water cooled | – | – | >10000 | – | 15-30 | – | – | – | 1-2000 | 1-500 | SLM | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | <2%, <1% | <0.002 | Datasheet |
556 NM Yellow Green Laser.
2 models| Model | Wavelength | Output / average power | Power Stability (rms, 4 hours ± 3°C) | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | Modulation optional | Power supply (12VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-W-556A | 556 nm | 800~3000 mW | <5%, <3%, (<2% optional) | Near TEM00 | 3-6 | <1.5 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | Datasheet |
| MGL-556(FC) | 556 nm | 1~2300 mW | – | TEM00 | <1.2 | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <1.0 | <1.5 | <8 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-SR-OEM (12V/25A) | Datasheet |
Infrared Laser, 1030 NM Infrared Laser Module, Infrared DPSS Lasers.
23 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Operating temperature (℃) | Power supply (VAC) | Excess relative intensity noise (rms, 10Hz-3MHz) | laser radar, etc. Fiber length(m) | Single pulse energy (nJ) | Rep. Rate( | Ave power stability (rms, 4 hours±3℃) | Polarization ratio | Pulse duration (ps) | Rep. rate | Fiber length (m) | Operating voltage (VDC/VAC) | Single pulse energy (uJ) | pulse | Pulse | Rep. Rate | Rep. rate (MHz) | Beam quality(M2) | Rep. rate (kHz) | Rep. Rate (kHz) | Pulse duration | Pulse duration (fs) | M2 factor | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1030 | 1030 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030 | 1030 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-LN-L | 1030 nm | 1~10 W | – | TEM00 | – | – | <30 | Air cooled or Water cooled | – | – | >10000 | <2%, <1%, <0.5% | SLM | 1-100% | <0.004 | <0.1%, <0.05% | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | 15-30 | 110/220VAC | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-LN-FA(1014-1120) | 1014 nm | 1~10 W | – | – | – | – | – | Air cooled (≤30W) or Water cooled (≤50W) | – | – | >10000 | <2%, <1%, <0.5% | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | 15-30 | 110/220VAC | <0.03% | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-H-1030-PS | 1030 nm | 1~20 W | – | TEM00 | – | <1 | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.2 | – | – | – | – | – | 15-35 | – | – | – | 1-500 | 20-120 | <2%, <1% | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-CW | 1030 nm | 1~100 W | – | TEM00 | – | <1 | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.2 | – | – | – | – | – | 15-35 | – | – | – | 1-500 | 20-120 | <2%, <1% | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-PS | 1030 nm | 1-2000 mW | – | TEM00 | – | <1 | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.2 | – | – | – | – | – | 15-35 | – | – | – | 1-500 | 20-120 | <2%, <1% | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-Pico | 1030 nm | 10-5000 mW | – | – | – | – | <15 | Air cooled | – | – | >10000 | <3%, <2% | – | – | – | – | – | <1.2 / <1.8 | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | 15-35 | – | – | – | – | – | – | – | 100-900 | 100kHz-20MHz | 1 | 12V/11.5A | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-Nano | 1030 nm | 0.5-10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-FG-1030A | 1030 nm | 1~5 W | – | TEM00 | – | <1.5 | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.3 | – | – | – | – | – | 10-35 | – | – | – | – | – | <5%, <3% | >100:1 Vertical | – | – | – | – | 1-10 | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-FG-1030B | 1030 nm | 5~40 W | – | TEM00 | – | <1.5 | <10 | – | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | >100:1 Vertical | – | – | – | – | 10-80 | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-HG-1030A | 1030 nm | 1~5 W | – | TEM00 | – | <1.5 | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.3 | – | – | – | – | – | 10-35 | – | – | – | 1-250 | – | <5%, <3% | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-HG-1030B | 1030 nm | 5~50 W | – | TEM00 | – | <1.5 | <10 | Water cooled | – | RAD1PS | – | – | – | – | – | – | – | <1.3 | – | – | – | – | – | 10-35 | – | – | – | – | – | <5%, <3% | >100:1 Vertical | – | – | – | – | 1-2.5 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030B | 1030 nm | 500~3000 mW | – | TEM00 | – | – | <10 | Air cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.2 | – | – | – | – | – | 15-35 | – | – | – | 6.25-30 | – | <2%, <1% | >100:1 Vertical | – | 80±2 | – | – | – | – | <150 | – | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030C | 1030 nm | 3~20 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.2 | – | – | – | – | – | 15-35 | – | – | – | – | – | <2%, <1% | >100:1 Vertical | – | – | – | – | – | – | <250 | 20-120 | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030D | 1030 nm | 20~50 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.2 | – | – | – | – | – | 15-35 | – | – | – | – | – | <2%, <1% | >100:1 Vertical | – | 20-120 | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030E | 1030 nm | 50~100 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | <1.3 | – | – | – | – | – | 15-35 | – | – | – | – | – | <2%, <1% | >100:1 Vertical | – | 20-120 | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-F-1030A | 1030 nm | 1~10 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | <2%, <1% | >100:1 Vertical | – | – | – | – | – | duration, / high | – | – | 1 | <1.3 | – | – | – | – | – | Datasheet |
| FS-F-1030B | 1030 nm | 10~20 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | <2%, <1% | >100:1 Vertical | – | – | – | – | – | – | <300 | – | – | <1.2 | 100-1000 | – | – | – | – | Datasheet |
| FS-F-1030C | 1030 nm | 20~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-F-1030D | 1030 nm | 50~100 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | <2%, <1% | >100:1 Vertical | – | – | – | – | – | – | – | – | – | <1.3 | – | 100-1000 | <300 | – | – | Datasheet |
| FS-G-1030A | 1030 nm | 1~10 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | 50-1000 | – | – | <800 | <1.3 | Datasheet |
| FS-G-1030B | 1030 nm | 10~40 W | – | TEM00 | – | – | <10 | Water cooled | – | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | 50-1000 | – | <800 | – | <1.3 | Datasheet |
Infrared Laser,1060 NM Infrared Diode Lasers,infrared Diode Laser System.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Operating temperature (℃) | Warranty | Operating voltage(external PCB1) | Operating voltage(external PCB2) | Connection | Operating temperature | Storage temperature | Humidity | After fiber output power (W) | Power stability (rms, over 4 hours) | Fiber core diameter (μm) | Fiber NA | Fiber connector | Fiber length (m) | TTL / Analog modulation | Cooling Way | Dimensions(mm3) | Line width(nm) | Fiber jacket | Beam diameter (mm) | Polarization state | Power supply (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1060(FC) | 1060 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1060 | 1060 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1060 | 1060 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1060 | 1060 nm | 1.5~2.5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060 | 1060 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1060 | 1060 nm | 1.5~2.5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-1060 | 1060 nm | 2.5~5 W | – | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-H-1060 | 1060 nm | 1~1500 mW | – | Multimode | <5 | – | – | – | – | 10,000 | – | – | months / 6 | 3VDC | 5VDC(TTL10kHz or Analog0-5V) | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | <90 %, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-1060B | 1060 nm | 20~300 W | – | – | – | – | – | – | – | 10000 | – | 10~40 | 1 year | – | – | – | – | – | – | >20, …, 30 / >30, …, 80 / 80~300(On request) | <2%, <1%, <0.5% | 400/600 | 0.22 | SMA905 | 2 | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | Air Cooled / Water Cooled | On request | – | – | – | – | – | Datasheet |
| FL-1060-CW | 1060 nm | 1~100 W | – | – | – | <15 | Air cooled | – | – | >10000 | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | FC/APC, Collimator optional | 1 | – | – | – | <2nm | PVC, Metal optional | 4±1 (Collimator output) | Random | 110/220VAC | Datasheet |
Infrared Laser,1310 NM Infrared Diode Lasers,infrared Diode Laser System.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | ultra compact, long lifetime, | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1310(FC) | 1310 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1310 | 1310 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1310 | 1310 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1310 | 1310 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1310-CW | 1310 nm | 1~5 W | – | – | – | <15 | Air cooled | – | – | >10000 | – | <3%, <2%, <1% | >±5nm | M2 / <1.3 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | 15-35 | 110/220VAC | Datasheet |
Infrared Laser, 1313 NM Infrared Laser Module,infrared Lasers.
4 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1313-SU | 1313 nm | 1~1000 mW | TEM00 | <1% | <1.2 | ~1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | Datasheet |
| MLL-H-1313 | 1313 nm | 1~1000 mW | TEM00 | <1% | <1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | Datasheet |
| MIL-H-1313 | 1313 nm | 1~1000 mW | TEM00 | – | <1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MIL-U-1313-SU | 1313 nm | 1000~2000 mW | TEM00 | – | <1.5 | ~1.0 | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser, 1319 NM Infrared Laser Module,infrared Lasers.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1319-FL | 1319 nm | 1~1000 mW | <3%, <2%, <1% | <1.0 | TEM00 | <1% | <2.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | >10000 | – | – | – | Datasheet |
| MIL-U-1319-FL | 1319 nm | 1~1500 mW | <3%, <2%, <1% | – | TEM00 | – | <1.5 / <2.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | Datasheet |
| MIL-V-1319 | 1319 nm | 1~5 W | – | – | – | – | ＜1.3 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | PSU-W-LED | >10000 | <3%, <2%, (<1% optional) | <3.0 | <20 | Datasheet |
| MIL-W-1319A | 1319 nm | 5~10 W | – | – | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-W-LED | >10000 | <3%, <2%, (<1% optional) | <1.0 | <20 | Datasheet |
Infrared Laser, 1573 NM Infrared Laser Module, DPSS Infrared Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|
| MIL-W-1573 | 1573 nm | 100~2000 mW | <5%, <3% | Air Cooled | Datasheet |
Infrared Diode Laser AT 1900 NM.
2 models| Model | Wavelength | Output / average power | After fiber output power (W) | Power stability (rms, over 4 hours) | Fiber core diameter (μm) | Fiber NA | Fiber connector | Fiber length (m) | Operating temperature (℃) | TTL / Analog modulation | Cooling Way | Dimensions(mm3) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-1900 | 1900 nm | 1~10 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-1908B | 1908 nm | 10~60 W | >10, 11, …, 20 / 20~60(On request) | <2%, <1%, <0.5% | 400/600 | 0.22 | SMA905 | 2 | 10~40 | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | Air Cooled / Water Cooled | 370 (L) ×406 (W) ×188 (H) / On request | 10000 | 1 year | Datasheet |
Infrared Laser,785 NM Infrared Diode Lasers,infrared Diode Laser System.
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-785(FC) | 785 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-785 | 785 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-785 | 785 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-785 | 785 nm | 2500~4000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-785 | 785 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-785 | 785 nm | 2500~4000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-785-B | 785 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-V-H-785 | 785 nm | 1~2000 mW | – | Multimode | <5 | – | – | – | – | 10000 | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
Infrared Laser,790 NM Infrared Diode Lasers,infrared Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-790 | 790 nm | 1~5 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-790 | 790 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-790 | 790 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
Infrared Diode Laser, 800 NM Infrared Diode Lasers, High Power Diode Laser System.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Line width (nm) | Power stability (rms, 4 hours±3℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-800(FC) | 800 nm | 1 mW~2 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| FC-800 | 800 nm | 1~10 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-800 | 800 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | Datasheet |
| MDL-III-800R | 800 nm | 1~500 mW | <3%, <2%, <1% | Round | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MDL-H-800 | 800 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| MDL-800 | 800 nm | 1 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | Datasheet |
| MSL-Ti-800 | 800 nm | 1~200 mW | – | – | <1 | <10 | – | – | PSU-H-FDA | >10000 | – | <0.00001 | <3%, <2% | Datasheet |
Infrared Diode Laser, 808 NM Infrared Diode Lasers, High Power Diode Laser System.
38 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Operating temperature (℃) | Fiber | M2 after fiber | Power stability (rms, over 4 hours) | Power supply | TTL / Analog modulation | Warranty | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-II-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Operating voltage(internal PCB) | Dimensions of internal PCB | Beam divergence (mrad) | Laser operation mode | Modulation optional | Storage temperature (°C) | Humidity (%) | Weight (g) | Dimensions | Φ12×38(L) mm2, 0.035 kg | Spectral line width (MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-808 | 808 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-808 | 808 nm | 1~400 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-808L | 808 nm | 1~100 mW | <2%, <1%, <0.5% | Near TEM00 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-808 | 808 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-808 | 808 nm | 2.5~6 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-808 | 808 nm | 6~8 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-808-SM | 808 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | 1m | ~1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-808 | 808 nm | 1~400 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-808 | 808 nm | 1~80 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-808R | 808 nm | 1~500 mW | <3%, <2%, <1% | Round | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-808 | 808 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-I-808 | 808 nm | 1~2500 mW | – | Multimode | <3. 0 | <5 | – | – | – | 10000 | – | – | 10~35 | – | – | <1%, <3%, <5% | PSU-III-OEM | TTL or Analog with 1Hz-1KHz 1KHz-10KHz, 10KHz-30KHz optional | 1 year | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-808 | 808 nm | 2.5~6 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-808 | 808 nm | 6~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-808 | 808 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-SN-808 | 808 nm | 6~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-808-SM | 808 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-808 | 808 nm | 1~400 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-FP-808 | 808 nm | 1~30 mW | – | Near TEM00 / Multimode | <1 / <15 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-FC-808 | 808 nm | 1~50 mW | – | Near TEM00 / Multimode | <1 / <5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | 100-240VAC | 12VDC | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-808 | 808 nm | 1~100 mW | – | Near TEM00 / Multimode | <1 / <10 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | 1 | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | 3VDC | mm2 / Φ12×50 | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-808 | 808 nm | 1~100 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | Datasheet |
| PGL-FS-808 | 808 nm | 1~200 mW | – | Near TEM00 / Multimode | <1 / <15 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-808 | 808 nm | 1~200 mW | – | Near TEM00 / Multimode | <1 / <10 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | 1 | – | Cable with flying leads | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | 3VDC | mm2 / Φ12×50 | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-D12-808 | 808 nm | 1~400 mW | – | Multimode | <5.0 | – | – | – | – | 10000 | – | – | 15~30 | – | – | – | DC 3V PCB / DC 5V PCB | – | 6 months | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 3VPCB / 5VPCB | 17(L) ×11(W) mm2 / 35(L) ×15(W) mm2 | – | Datasheet |
| PGL-H-808 | 808 nm | 1~1500 mW | – | Near TEM00 / Multimode | <1 / <15 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | Cable with flying leads | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-808 | 808 nm | 1~2000 mW | – | Near TEM00 / Multimode | <1 / <5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | 100-240VAC | 12VDC | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-FC-808 | 808 nm | 1~2000 mW | – | Near TEM00 / Multimode | <1 / <5 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | 100-240VAC | 12VDC | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-III-808L | 808 nm | 1~120 mW | <2%, <1%, <0.5% | – | ~2.0 | <5 | – | – | PSU-III-FDA | >10000 | <1%, <0.5% | <1.5 | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <100, (<50 optional) | Datasheet |
| MSL-T-808 | 808 nm | 1~300 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-E-808 | 808 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-808/810 | 808 nm | 20~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-808H | 808 nm | 50~2000 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-808 | 808 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-808 | 808 nm | 1~60 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-808(FC) | 808 nm | 1 mW~10 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-808 | 808 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-D-808 | 808 nm | 1~450 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
830 NM Infrared Diode Laser.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-830(FC) | 830 nm | 1~1500 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-830 | 830 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-830 | 830 nm | 1~2000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-830 | 830 nm | 1~2000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-830-B | 830 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-V-H-830 | 830 nm | 1~1000 mW | – | – | <5 | – | – | – | – | 10000 | Multimode | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| PGL-V-H-FC-830 | 830 nm | 1~1000 mW | – | – | <5 | – | – | – | – | 10000 | Multimode | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
Infrared Laser, 852 NM Infrared Diode Lasers.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-852(FC) | 852 nm | 1~1200 mW | <2%, <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| FC-852 | 852 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-852 | 852 nm | 1~1500 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | <1%, <0.5% | Datasheet |
| MDL-III-852 | 852 nm | 1~1500 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | Datasheet |
Infrared Laser, 940 NM Infrared Diode Lasers, High Power Diode Laser System.
26 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (℃) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating voltage(internal) | Operating voltage(external PCB1) | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-940L | 940 nm | 1~250 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-940 | 940 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-940 | 940 nm | 1~4.5 W | – | Multimode | <1%, <0.5% | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-940-SM | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-940 | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940L | 940 nm | 1~250 mW | <2%, <1%, <0.5% | – | – | <1.5 | <1.0 | – | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940R | 940 nm | 1~350 mW | <3%, <2%, <1% | Round | – | – | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940 | 940 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-940 | 940 nm | 1~4.5 W | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-940 | 940 nm | 4.5~6 W | – | Multimode | – | – | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940-SM | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-940 | 940 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-940 | 940 nm | 1~10 mW | – | – | – | – | – | – | – | -10°C to +45°C | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-940 | 940 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-940 | 940 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC (TTL10kHz, optional) | 5VDC(TTL30kHz or Analog 0-3V,0-5V, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-940 | 940 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC (TTL10kHz, optional) | 5VDC(TTL30kHz or Analog 0-3V,0-5V, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | Datasheet |
| PGL-FP-940 | 940 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-940 | 940 nm | 1~1500 mW | – | Multimode | – | – | <10 | – | – | – | – | 10000 | – | – | – | – | 9 pin connector | – | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
| PGL-V-H-FC-940 | 940 nm | 1~1000 mW | – | Multimode | – | – | <10 | – | – | – | – | 10000 | – | – | – | – | 9 pin connector | – | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
| MDL-E-940 | 940 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-940 | 940 nm | 1~300 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-940 | 940 nm | 1~60 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-940(FC) | 940 nm | 1~5 W | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-940 | 940 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-938/940 | 938 nm | 30~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-940H | 940 nm | 50~100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Laser, 975 NM Infrared Diode Lasers, High Power Diode Laser System.
26 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Transverse mode | Operating temperature (℃) | Fiber type | DIODE LASER AT 975nm Fiber Core diameter | Fiber connector | long lifetime, cost-effectiveness and Fiber jacket | Modulation option | monitoring, | Operating voltage (VDC) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-975 | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-975L | 975 nm | 1~200 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-975 | 975 nm | 1~2500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-975 | 975 nm | 2.5~5 W | – | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-975 | 975 nm | 5~8 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-975-SM | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-975 | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-975 | 975 nm | 1~50 mW | <2%, <1%, <0.5% | <1%, <0.5% | ~1.5 | <1.0 | <5 | – | – | >10000 | – | Near TEM00 | 10-35 | – | – | – | – | AMOD (Analog) DC-100kHz | inspection | 12V/4A | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975L | 975 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Near TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975R | 975 nm | 1~500 mW | <3%, <2%, <1% | – | – | ~10 / ~20 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Round | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975 | 975 nm | 1~2500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-975 | 975 nm | 2.5~5 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-975 | 975 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-975 | 975 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-975-SM | 975 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-975 | 975 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-975 | 975 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | Datasheet |
| MDL-E-975 | 975 nm | 1~30 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-975 | 975 nm | 1~200 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-975 | 975 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-D-975 | 975 nm | 1~450 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-975(FC) | 975 nm | 1 mW~8 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | Multimode | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-975 | 975 nm | 1 W~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-976/980A | 976 nm | 30~40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-976/980H-50~100W | 976 nm | 50~100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-976/980H-110-150W | 976 nm | 110-150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 980 NM Infrared Diode Lasers, High Power Diode Laser System.
33 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Operating temperature (℃) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Modulation option | Power Stability (rms, 4 hours ± 3°C) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-II-OEM) | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | Operating voltage(internal PCB) | Dimensions of internal PCB | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-980 | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980L | 980 nm | 1~200 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980 | 980 nm | 1~2500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-980 | 980 nm | 2.5~5 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-980 | 980 nm | 5~8 W | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-980-SM | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-980 | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-980 | 980 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980L | 980 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980R | 980 nm | 1~500 mW | <3%, <2%, <1% | – | – | ~10 / ~20 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Round | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980 | 980 nm | 1~2500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-980 | 980 nm | 2.5~5 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-980 | 980 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-980 | 980 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-SN-980 | 980 nm | 6~12 W | – | – | – | <3.0 | <5 | 10-35 | – | >10000 | Multimode | – | – | – | – | – | – | – | <2%, <1%, (<0.5% optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-980-SM | 980 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-E-980 | 980 nm | 1~30 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-980 | 980 nm | 1~200 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-980 | 980 nm | 1~50 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-980 | 980 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-980 | 980 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-980 | 980 nm | 1~100 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | Datasheet |
| PGL-VI-980 | 980 nm | 1~100 mW | – | – | – | <1 / <8 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | 1 | – | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | 3VDC | mm2 / Φ12×50 | – | – | Datasheet |
| PGL-VI-FC-980 | 980 nm | 1~100 mW | – | – | – | <1 / <8 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | 1 | – | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | 3VDC | mm2 / Φ12×50 | – | – | Datasheet |
| PGL-FS-980 | 980 nm | 1~400 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | Datasheet |
| PGL-V-H-FC-980 | 980 nm | 1~1000 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | – | – | 100-240VAC | 12VDC | Datasheet |
| PGL-H-980 | 980 nm | 1~1500 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 5V / (TTL30kHz or Analog 0-5V,optional) | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 77(L)×30(W)×30(H)mm3 | – | – | – | – | Datasheet |
| PGL-V-H-980 | 980 nm | 1~2000 mW | – | – | – | <1 / <15 | – | – | – | 10000 | Near TEM00 / Multimode | – | – | – | – | – | – | – | – | – | – | – | 9 pin connector | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | – | – | 100-240VAC | 12VDC | Datasheet |
| FC-D-980 | 980 nm | 1~450 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-980(FC) | 980 nm | 1 mW~10 W | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-980 | 980 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-980 | 980 nm | 30~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-980H | 980 nm | 50~150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
RED Laser, 633 NM RED Laser, HE NE Laser |
2 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms,10Hz-3MHz) | Frequency shift (MHz)(over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-633 | 633 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-633-LN-L | 633 nm | 1~1500 mW | 1mW-1.5W | 1-500 | <2%, <1% | TEM00 | SLM | 1-100% | <0.002 | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | Datasheet |
639 NM RED Solid State Laser.
10 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Pointing stability over temperature (μrad/°C) | Warm-up time (minutes) | Cooled method (water cooled) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization ratio | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | Power stability (rms, 4 hours±3℃) | Noise of amplitude (rms, 1Hz-20MHz) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Noise of amplitude (rms, 20Hz-20MHz) | Cooled method (Water Cooled) | M2 | Operating Temperature (°C) | Modulation optional | Beam diameter at the aperture (1/e2, mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-639 | 639 nm | 650~3000 mW | TEM00 | Single | <5MHz | <8 | <15 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-639 | 639 nm | 1~1500 mW | TEM00 | – | – | – | <5 | – | 10-35 | PSU-H-FDA | >10000 | >100:1, Horizontal (Vertical optional) | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-DP-639-A | 639 nm | 1500~2000 mW | Near TEM00 | – | <0.1, <0.003 | – | <10 | – | – | PSU-DP-A | >10000 | >100:1, Horizontal (Vertical optional) | – | – | <3%, <2%, <1% | <1% | <1.2 | Air Cooled | 10-35 | – | – | – | – | – | – | Datasheet |
| MLL-DP-639-B | 639 nm | 2000~8000 mW | Near TEM00 (TEM00 optional) | – | <0.003, <0.01, <0.1 | – | <10 | – | – | PSU-W-FDA | >10000 | >100:1, Horizontal (Vertical optional) | – | – | <3%, <2%, <1% | – | <3.0 | – | 10-35 | <1% | WCH-580 | – | – | – | – | Datasheet |
| MRL-FN-639 | 639 nm | 800~1800 mW | TEM00 | – | – | – | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | <1.5 | – | – | – | – | <1.2 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | Datasheet |
| MRL-FN-639-H | 639 nm | 1.8~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-639-A | 639 nm | 3~4 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | 10-35 | PSU-DP-A | >10000 | – | – | – | <3%, <2%, <1% | – | – | Air Cooled | – | – | – | – | – | – | <3.0 | Datasheet |
| MRL-DP-639-B | 639 nm | 4~10 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | <3%, <2%, <1% | – | – | – | 10-35 | – | WCH-580 | – | – | – | ~3.0 | Datasheet |
| MRL-DP-639-C | 639 nm | 10~17 W | Multi mode | – | – | – | <10 | – | – | – | >10000 | – | – | 12V/ 25A | <3%, <2%, <1% | – | <5.0 | – | 10-35 | – | WCH-580 | – | – | – | ~3.0 | Datasheet |
| MRL-FN-639-SM | 639 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
640 NM RED Diode Laser.
14 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (urad/°C) | Operating temperature (°C) | Operating voltage (VDC) | Spectral line width (nm) | Noise of amplitude (rms, 1Hz-20MHz) | Cooled method | Operating temperature (℃) | Noise of amplitude (rms, 20Hz-20MHz) | Cooled method (Water Cooled) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-640(Line) | 640 nm | 1~4000 mW | <2%, <1%, <0.5% | TEM00 | <1.2, <1.1 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-640(FC) | 640 nm | 1~10000 mW | <2%, <1%, <0.5% | TEM00 | <1.2, <1.1 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-640 | 640 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-640 | 640 nm | 1~1500 mW | – | TEM00 | – | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | – | PSU-H-FDA | >10000 | <8 | 10-35 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-DP-640-A | 640 nm | 1.5~2 W | <3%, <2%, <1% | Near TEM00 | – | – | <1.2 | >100:1, Horizontal (Vertical optional) | <10 | – | – | – | PSU-DP-A | >10000 | – | – | – | <0.1, <0.003 | <1% | Air Cooled | 10-35 | – | – | Datasheet |
| MLL-DP-640-B | 640 nm | 2~8 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | – | <3.0 | >100:1, Horizontal (Vertical optional) | <10 | – | – | – | PSU-W-FDA | >10000 | – | – | – | <0.003, <0.01, <0.1 | – | – | 10-35 | <1% | WCH-580 | Datasheet |
| DL-MD-640 | 640 nm | 1~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| DL-HD-640 | 640 nm | 2~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-FN-640 | 640 nm | 800~1800 mW | – | TEM00 | <1.2 | – | <1.5 | – | <5 | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-640-A | 640 nm | 3~4 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | <3.0 | – | – | <10 | – | – | – | PSU-DP-A | >10000 | – | 10-35 | – | – | – | Air Cooled | – | – | – | Datasheet |
| MRL-DP-640-B | 640 nm | 4~10 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | ~3.0 | – | – | <10 | – | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | – | – | – | 10-35 | – | WCH-580 | Datasheet |
| MRL-DP-640-C | 640 nm | 10~17 W | <3%, <2%, <1% | Multi mode | – | ~3.0 | <5.0 | – | <10 | – | – | – | – | >10000 | – | – | 12V/ 25A | – | – | – | 10-35 | – | WCH-580 | Datasheet |
| MRL-FN-640-SM | 640 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-640 | 640 nm | 3~40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
655 NM RED Diode Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-655 | 655 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MDL-III-655 | 655 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | Datasheet |
| MDL-MD-655 | 655 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-HD-655 | 655 nm | 1.5~3 W | <2%, <1%, <0.5% | – | ~2.5×2.5 | <5 | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Multimode | Horizontal+ Vertical | 25±3 | Datasheet |
| MDL-XD-655 | 655 nm | 3~4.5 W | – | – | – | – | – | – | – | – | – | – | – |
730 NM RED Diode Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-730(FC) | 730 nm | 1~1200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-730 | 730 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-730 | 730 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-730 | 730 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-730 | 730 nm | 1~1500 mW | – | Multimode | – | <5 | – | – | – | – | 10000 | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
Yellow Laser, 589 NM Yellow DPSS Lasers.
2 models| Model | Wavelength | Output / average power | Power Stability (rms, 4 hours ± 3°C) | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | lifetime | Polarization ratio | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | instrument, etc. Operating temperature (℃) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-V-589-Water | 589 nm | 500~1500 mW | <3%, <2%, (<1% optional) | TEM00 | <1.2 | <1 | <10 | Pointing Stability Over Temperature (urad/°C) / <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | Datasheet |
| MGL-W-589A | 589 nm | 1500~7000 mW | <3%, <2%, (<1% optional) | Near TEM00 | – | <2.0 | – | – | – | – | PSU-W-LED | >10000 | ~4.0 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optiona | Datasheet |
594 NM Yellow Orange Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MGL-U-594-SF | 594 nm | 800~1500 mW | TEM00 | ~3.0 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
425 NM Blue Violet Laser, Diode Laser, Blue Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-425 | 425 nm | 500~1300 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <2.5×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-425 | 425 nm | 500~1300 mW | – | Multimode | – | <2.5×0.2 | – | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
444 NM Blue Violet Diode Laser.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (℃) | Polarization direction | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-444 | 444 nm | 1~3000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | 1.4×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MLL-F-444 | 444 nm | 3~4.5 W | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | – | Datasheet |
| F-444-HS | 444 nm | 1~4000 mW | – | Multimode | – | 1.4×0.2 / 1.4×0.2 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | Datasheet |
| MDL-H-444 | 444 nm | 1~3000 mW | <2%, <1%, <0.5% | Multimode | – | 1.4×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-F-444 | 444 nm | 3~4.5 W | – | Multimode | – | 1.4×0.2 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | – | Datasheet |
| MDL-MD-444 | 444 nm | 1~8000 mW | <2%, <1%, <0.5% | Multimode | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | Datasheet |
| MDL-HD-444 | 444 nm | 8~16 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XD-444 | 444 nm | 16~20 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-444 | 444 nm | 1~25 W | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-444C | 444 nm | 20-30 W | – | – | – | – | – | – | – | – | – | – | – |
1073 NM Infrared Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-F-1073 | 1073 nm | 1~1500 mW | TEM00 | ~1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser, 915 NM Infrared Diode Lasers, High Power Diode Laser System.
13 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-915 | 915 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | Datasheet |
| MLL-III-915 | 915 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | Datasheet |
| MLL-H-915 | 915 nm | 1.5~5 W | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | – | Datasheet |
| MLL-F-915 | 915 nm | 5~8 W | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | 10-35 | Datasheet |
| TEM-F-915 | 915 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | Datasheet |
| MDL-XS-915 | 915 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | – | Datasheet |
| MDL-III-915L | 915 nm | 1~270 mW | <2%, <1%, <0.5% | – | – | <1.5 | <1.0 | – | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | Datasheet |
| MDL-III-915R | 915 nm | 1~350 mW | <3%, <2%, <1% | Round | – | – | ~10 / ~20 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | Datasheet |
| MDL-III-915 | 915 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | Datasheet |
| MDL-H-915 | 915 nm | 1.5~5 W | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | – | Datasheet |
| MDL-F-915 | 915 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-915 | 915 nm | 1~200 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | – | Datasheet |
| MDL-PS-915 | 915 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | – | Datasheet |
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
40 models| Model | Wavelength | Output / average power | Spectral linewidth | Optical noise | M² | Transverse mode | Longitudinal mode | Pointing stability over temperature (μrad/°C) | Warm-up time (minutes) | Cooled method (water cooled) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Pointing stability over temperature (urad/°C) | Cooled method (Water cooled) | Power supply (90-264VAC) | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Operating temperature (℃) | Cooled method | Free space output power (mW) | Fiber coupled output power (mW) | Current adjustment range | Frequency shift (MHz) (over ±2℃and 8hours ) | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Operating voltage (VAC) | Free space output power (W) | Power stability (rms, 4 hours , ±3℃) | M2 | Beam diameter (mm) | Pointing stability (urad) | Fundamental Frequency | Warm-up time of warm boot(minutes) | Warm-up time of cold boot(hours) | Frequency shift (MHz) (over ±2℃and 8 hours) | Frequency shift (MHz)(over ±2℃and 8hours ) | Frequency shift (MHz) (over ±2℃and 8 hours ) | Power supply (VAC) | Single pulse energy (nJ) | Rep. rate (MHz) | Ave power stability (rms, 4 hours±3℃) | pulse | M2 factor | Frequency doubler | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-457 | 457 nm | 350~3500 mW | <5 MHz | <0.5% | <1.2 | TEM00 | Single | <8 | <15 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-U- 532 | 532 nm | 1~1000 mW | <1 MHz | <0.25% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-532 | 532 nm | 1~15 W | <5 MHz | <0.1% optional | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-607 | 607 nm | 200~1000 mW | <5 MHz | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-639 | 639 nm | 650~3000 mW | <5 MHz | <0.5% | <1.3 | TEM00 | Single | <8 | <15 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-640 | 640 nm | 650~3000 mW | <5 MHz | <0.5% | <1.3 | TEM00 | Single | <8 | <15 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-W-671 | 671 nm | 500~2500 mW | <0.00001 nm | <0.5% | <1.5 | TEM00 | Single | – | <20 | – | 20-30 | – | >10000 | <3%, <2% | <3.0 | >100:1, Horizontal (Vertical optional) | <8 | WCH-580 | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-698 | 698 nm | 300~1000 mW | <5 MHz | <0.5% | <1.3 | TEM00 | Single | <8 | <15 | WCH-580 | 20-30 | PSU-W-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-721 | 721 nm | 300~1000 mW | <5 MHz | <0.5% | <1.3 | TEM00 | Single | <8 | – | WCH-580 | 20-30 | – | >10000 | <3%, <2%, <1% | ~1.5 | >100:1, Vertical (Horizontal optional) | – | – | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-Ti-CW-729 | 729 nm | 1~2000 mW | <500 fm nm | Water cooled | – | – | – | – | <10 | – | – | RAD1PS | >10000 | – | – | – | – | – | – | <3%, <2% | <4 | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-Ti-CW-785 | 785 nm | 1~1200 mW | <500 fm nm | – | – | – | – | – | <10 | – | – | RAD1PS | >10000 | – | – | – | – | – | – | <3%, <2% | <4 | 15-35 | Water Cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-U-1064-SU | 1064 nm | 700~1000 mW | <1 MHz | <1% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-1064 | 1064 nm | 1~10 W | <5 MHz | <0.5% | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 509 | 509 nm | 1~2000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 513 | 513 nm | 1~1000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-515-SLM | 515 nm | 1~2000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Air cooled or Water cooled | 1-2000 | 1-500 | 1-100% | <±200 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 520 | 520 nm | 1~2000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 525 | 525 nm | 1~2000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-532-SLM | 532 nm | 1~3000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Water cooled | – | – | 1-100% | – | – | – | – | >20 Horizontal (Vertical optional) | 110/220V | 3-10 / 10-15 | <2%, <1%, <0.5% | <1.1 / <1.2 | ~0.8 | <15 / <50 | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-532-SLM-H | 532 nm | 3-15 W | <50 kHz | <0.1% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Water cooled | – | – | 1-100% | – | – | – | – | >20 Horizontal (Vertical optional) | 110/220V | 3-10 / 10-15 | <2%, <1%, <0.5% | <1.1 / <1.2 | ~0.8 | <15 / <50 | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-532-SLM-E | 532 nm | 20-40 W | <50 kHz | <0.1% RIN(DC-3 MHz) | <1.2 | TEM00 | SLM | – | – | – | – | – | >10000 | – | – | Vertical, >100:1 | – | – | – | – | <1 | 15-30 | Water cooled | – | – | – | – | – | – | – | – | 110/220VAC | – | <2%, <1%, <0.5% | – | ~1.6 | <15 / <50 | – | <30 | <2 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 540 | 540 nm | 1~2000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 631 | 631 nm | 1~1500 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-633-SLM | 633 nm | 1~1500 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Air cooled or Water cooled | 1mW-1.5W | 1-500 | 1-100% | – | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | – | <2%, <1% | – | – | – | – | – | – | <±200 | – | – | – | – | – | – | – | – | – | Datasheet |
| 775 | 775 nm | 1~2000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-780-SLM | 780 nm | 1~2000 mW | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Air cooled or Water cooled | 1-2000 | 1-500 | 1-100% | – | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | – | <2%, <1% | – | – | – | – | – | – | – | <±200 | – | – | – | – | – | – | – | – | Datasheet |
| 1014 | 1014 nm | 1~5 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1018 | 1018 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1027 | 1027 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-SLM | 1030 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Air cooled or Water cooled | – | – | 1-100% | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | >15, after PM fiber | – | – | <2%, <1%, <0.5% | – | 4±1 (Collimator output) | – | – | – | – | – | – | <±200 | 110/220VAC | – | – | – | – | – | – | Datasheet |
| 1040 | 1040 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1050 | 1050 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1053-SLM | 1053 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Air cooled or Water cooled | – | – | 1-100% | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | >15, after PM fiber | – | – | <2%, <1%, <0.5% | – | 4±1 (Collimator output) | – | – | – | – | – | – | <±200 | 110/220VAC | – | – | – | – | – | – | Datasheet |
| FL-1064-SLM | 1064 nm | 1-10 W | <5 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Air cooled or Water cooled | – | – | 1-100% | – | Collimator | 1 | Metal | >15, after PM fiber | – | – | <2%, <1%, <0.5% | – | 4±1 (Collimator output) | <5 / <10 | – | – | – | – | – | – | 110/220VAC | – | – | – | – | – | – | Datasheet |
| FL-1064-SLM-H | 1064 nm | 10-70 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | SLM | – | <30 | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-30 | Air cooled or Water cooled | – | – | 1-100% | – | Collimator | 1 | Metal | >15, after PM fiber | – | – | <2%, <1%, <0.5% | – | 4±1 (Collimator output) | <5 / <10 | – | – | – | – | – | – | 110/220VAC | – | – | – | – | – | – | Datasheet |
| 1080 | 1080 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1100 | 1100 nm | 1~5 W | <20 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1120 | 1120 nm | 1~2 W | <100 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1550 | 1550 nm | 1~10 W | <5 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1908 | 1908 nm | 1~5000 mW | <50 kHz | <0.05% RIN(DC-3 MHz) | <1.1 | TEM00 | – | – | <10 | – | – | 12V/6.67A | >10000 | – | – | >100:1 Vertical | – | – | – | – | – | 10-35 | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <1.2 | LASER HEAD (780) / POWER SUPPLY | Datasheet |
509 NM Green Laser.
2 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-509-SLM | 509 nm | 1~2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | Datasheet |
| FL-509-LN-L | 509 nm | 1~2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <2%, <1% | <0.002 | Datasheet |
513 NM Green Laser.
2 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-513-SLM | 513 nm | 1~1000 mW | 1-1000 | 1-500 | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | Datasheet |
| FL-513-LN-L | 513 nm | 1~1000 mW | 1-1000 | 1-500 | TEM00 | SLM | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <2%, <1% | <0.002 | Datasheet |
525 NM Green Laser.
2 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-525-SLM | 525 nm | 1~2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | Datasheet |
| FL-525-LN-L | 525 nm | 1~2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <2%, <1% | <0.002 | Datasheet |
Infrared Laser, 1014 NM Infrared Laser Module, Infrared Fiber Lasers.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1014-SLM | 1014 nm | 1~5 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | Datasheet |
| FL-1014-LN-L | 1014 nm | 1~5 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | Datasheet |
Infrared Laser, 1018 NM Infrared Laser Module, Infrared Fiber Lasers.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Line width(nm) | Fiber length (m) | Polarization state | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1018-SLM | 1018 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | Datasheet |
| FL-1018-LN-L | 1018 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | – | – | – | Datasheet |
| FL-1018-CW | 1018 nm | 1~10 W | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 110/220VAC | >10000 | – | – | <2nm | 1 | Random | Datasheet |
Infrared Laser, 1027 NM Infrared Laser Module, Infrared Fiber Lasers.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1027-SLM | 1027 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | Datasheet |
| FL-1027-LN-L | 1027 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | Datasheet |
1070 NM Infrared Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Line width(nm) | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization state | Warm-up time (minutes) | Operating temperature (℃) | Cooled method | Power supply (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1070-CW | 1070 nm | 1~100 W | <2nm | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | <15 | 15-35 | Air cooled | 110/220VAC | >10000 | Datasheet |
1080nm Laser, Infrared Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1080-SLM | 1080 nm | 1-10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | Datasheet |
| FL-1080-LN-L | 1080 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | Datasheet |
| FL-1080-CW | 1080 nm | 1~500 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
1090 NM Infrared Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Line width(nm) | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization state | Warm-up time (minutes) | Operating temperature (℃) | Cooled method | Power supply (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1090-CW | 1090 nm | 1~20 W | <2nm | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | <15 | 15-35 | Air cooled | 110/220VAC | >10000 | Datasheet |
Infrared Laser, 1100 NM Infrared Laser Module, Infrared Fiber Lasers.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Line width(nm) | Fiber length (m) | Polarization state | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1100-SLM | 1100 nm | 1~5 W | <2%, <1%, <0.5% | TEM00 | SLM | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | Datasheet |
| FL-1100-LN-L | 1100 nm | 1~5 W | <2%, <1%, <0.5% | TEM00 | SLM | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | – | – | – | Datasheet |
| FL-1100-CW | 1100 nm | 1~10 W | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 110/220VAC | >10000 | – | – | <2nm | 1 | Random | Datasheet |
1120 NM IR Laser, Infrared Diode Laser |
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Operating temperature (°C) | Power supply (100-240VAC) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | biomedicine, spectroscopy, laser sintering, laser | Polarization ratio | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1120-SLM | 1120 nm | 1~2 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1120 | 1120 nm | 1~1000 mW | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Conduction | – | – | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | Datasheet |
| FL-1120-LN-L | 1120 nm | 1~2 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | <0.004 | <±200 | – | – | – | Datasheet |
| MLL-H-1120 | 1120 nm | 1~2.5 W | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| MLL-F-1120 | 1120 nm | 2.5~5 W | – | – | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | 10-35 | – | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | – | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| MDL-III-1120 | 1120 nm | 1~1000 mW | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Conduction | – | – | >10000 | <2%, <1%, <0.5% | – | <3.0 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | Datasheet |
| MDL-H-1120 | 1120 nm | 1~2.5 W | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | <2%, <1%, <0.5% | – | <3.0 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| MDL-F-1120 | 1120 nm | 2.5~5 W | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | 10-35 | – | >10000 | – | – | <3.0 | – | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| FL-1120-CW | 1120 nm | 1~20 W | <2%, <1%, <0.5% | – | – | – | – | – | <1.3 | – | 1 | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | – | >10000 | – | – | – | – | – | – | – | Fiber connector2 / FC/APC, Collimator optional | Random | 110/220VAC | Datasheet |
1178nm Laser, Infrared Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1178-CW | 1178 nm | 1~10 W | <2%, <1%, <0.5% | >±5nm | <1.3 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | Air cooled | <15 | 15-35 | 110/220VAC | >10000 | Datasheet |
1240nm Laser, Infrared Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | ultra compact, long lifetime, | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1240-CW | 1240 nm | 1~15 W | <2%, <1%, <0.5% | >±5nm | M2 / <1.3 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | Air cooled | <15 | 15-35 | 110/220VAC | >10000 | Datasheet |
1484nm Laser, Infrared Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1484-CW | 1484 nm | 1~10 W | <2%, <1%, <0.5% | >±5nm | <1.2 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | Air cooled | <15 | 15-35 | 110/220VAC | >10000 | Datasheet |
Infrared Diode Laser AT 1908 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Spectral linewidth (kHz) | Relative intensity noise (rms, 10Hz-3MHz) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Pointing stability (urad) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Relative intensity noise (rms,10Hz-3MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1908-SLM | 1908 nm | 1~5 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <50 | <0.3%, <0.1%, (<0.05% optional) | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | <5 / <10 | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | Datasheet |
| FL-1908-LN-L | 1908 nm | 1~5 W | <2%, <1% | TEM00 | SLM | 1-100% | – | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | <5 / <10 | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.006 | <0.1%, <0.05% | Datasheet |
631 NM RED Diode Laser.
2 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Relative intensity noise (rms,10Hz-3MHz) | Frequency shift (MHz)(over ±2℃and 8hours ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-631-SLM | 631 nm | 1~1500 mW | 1mW-1.5W | 1-500 | <2%, <1% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | – | Datasheet |
| FL-631-LN-L | 631 nm | 1~1500 mW | 1mW-1.5W | 1-500 | <2%, <1% | TEM00 | SLM | 1-100% | – | – | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <0.002 | <0.1%, <0.05% | <±200 | Datasheet |
775nm
2 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Spectral linewidth (kHz) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz)(over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-775-SLM | 775 nm | 1~2000 mW | 1-2000 | 1-500 | <2%, <1% | TEM00 | SLM | 1-100% | <20 | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | Datasheet |
| FL-775-LN-L | 775 nm | 1~2000 mW | 1-2000 | 1-500 | <2%, <1% | TEM00 | SLM | 1-100% | – | <0.1%, <0.05% | – | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <0.002 | <±200 | Datasheet |
588nm Yellow Laser, Yellow Orange Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power Stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Operating temperature (℃) | Power supply (100-240VAC) | Modulation option | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-W-588A | 588 nm | 500~7000 mW | <3%, <2%, (<1% optional) | Near TEM00 | <2.0 | ~4.0 | >50:1(100:1 optional), Horizontal(Vertical optional) | 10-35 | PSU-W-LED | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | >10000 | Datasheet |
1040 NM Infrared Solid State Laser
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Line width(nm) | Fiber length (m) | Polarization state | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1040-SLM | 1040 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | Datasheet |
| FL-1040-LN-L | 1040 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | – | – | – | Datasheet |
| FL-1040-CW | 1040 nm | 1~100 W | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 110/220VAC | >10000 | – | – | <2nm | 1 | Random | Datasheet |
Infrared Laser,1532 NM Infrared Diode Lasers, Infrared Fiber Coupled Laser System.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XF-1532 | 1532 nm | 800~2000 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
535 NM Green Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Pulse duration (ps) | M2 | Rep. rate | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-535-Pico | 535 nm | 1~1000 mW | <5%, <3%, <2% | 100-900 | <1.5 / <2 | 100kHz-20MHz / 100kHz-1MHz | >15 Horizontal (Vertical optional) | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | Second harmonic | Datasheet |
540 NM Green Laser, Green Solid State Laser |
4 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | Pulse duration (ps) | Rep. rate | Operating voltage (VDC) | Fundamental Frequency | stability, good beam profile, ultra compact, | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-540-SLM | 540 nm | 1-2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | – | – | – | – | – | Datasheet |
| FL-540-LN-L | 540 nm | 1~2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <2%, <1% | <0.002 | – | – | – | – | – | Datasheet |
| FL-540-Pico | 540 nm | 1-1000 mW | – | – | – | – | – | – | – | <1.5 / <2 | – | – | – | >15 Horizontal (Vertical optional) | <15 | Air cooled | 15-35 | – | >10000 | <5%, <3%, <2% | – | 100-900 | 100kHz-20MHz / 100kHz-1MHz | 12V/11.5A | Second harmonic | – | Datasheet |
| FL-540-Nano | 540 nm | 1-1000 mW | – | – | – | – | – | – | – | <1.8 | – | – | – | >15 Horizontal (Vertical optional) | <15 | Air cooled | 15-35 | – | >10000 | <3%, <2% | – | – | – | 12V/11.5A | Second harmonic | Rep. rate3 / 100kHz-1MHz | Datasheet |
Infrared Laser, 1050 NM Infrared Laser Module, Infrared DPSS Lasers.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Line width(nm) | Fiber length (m) | Polarization state | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1050-SLM | 1050 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | Datasheet |
| FL-1050-LN-L | 1050 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | – | – | – | Datasheet |
| FL-1050-CW | 1050 nm | 1~100 W | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 110/220VAC | >10000 | – | – | <2nm | 1 | Random | Datasheet |
515 NM Green Laser.
15 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Pulse duration (ps) | Rep. rate | Delivery fiber length (cm) | Operating voltage (VDC) | Fundamental Frequency | Single pulse energy (uJ) | Rep. rate (kHz) | Ave power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Polarization ratio | Power supply (100-240VAC) | Rep. rate (MHz) | features of short pulse duration, high repetition | Pulse duration (fs) | M2 factor | Fiber | pulse | pulse duration, | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-515-LN-L | 515 nm | 1~2000 mW | 1-2000 | 1-500 | <2%, <1% | TEM00 | SLM | 1-100% | <0.002 | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-515-Pico | 515 nm | 1-1000 mW | – | – | <5%, <3%, <2% | – | – | – | – | – | – | <1.5 / <2 | – | – | – | >15 Horizontal (Vertical optional) | <15 | Air cooled | 15-35 | – | >10000 | 100-900 | 100kHz-20MHz / 100kHz-1MHz | 60 | 12V/11.5A | Second harmonic | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-515-Nano | 515 nm | 1-1000 mW | – | – | <3%, <2% | – | – | – | – | – | – | <1.8 | – | – | – | >15 Horizontal (Vertical optional) | <15 | Air cooled | 15-35 | – | >10000 | – | 100kHz-1MHz | 60 | 12V/11.5A | Second harmonic | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-H-515-PS | 515 nm | 1-5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-FG-515A | 515 nm | 1-20 W | – | – | – | TEM00 | – | – | – | – | – | <1.3 | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | 10±1 | – | – | – | – | 1-40 | 500-1000 | <5%, <3% | <1.5 | >100:1 Horizontal | RAD1PS | – | – | – | – | – | – | – | Datasheet |
| PS-HG-515A | 515 nm | 1-20 W | – | – | – | TEM00 | – | – | – | – | – | <1.3 | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | 10-150 | – | – | – | – | 0.05-1 | – | – | <1.5 | >100:1 Horizontal | RAD1PS | 20-120 | Ave power stability (rms, 4 hours±3℃) / <5%, <3% | – | – | – | – | – | Datasheet |
| FS-H-515B | 515 nm | 100~1000 mW | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | <2%, <1% | – | >100:1 Horizontal | RAD1PS | 80±1 | – | <150 | <1.2 | – | – | – | Datasheet |
| FS-H-515C | 515 nm | 1~10 W | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | <2%, <1% | – | >100:1 Horizontal | RAD1PS | 20-120 | – | <250 | <1.2 | Femtosecond / pulsed / laser / at | – | – | Datasheet |
| FS-H-515D | 515 nm | 10~30 W | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | <2%, <1% | – | >100:1 Horizontal | RAD1PS | 20-120 | – | <250 | <1.2 | Femtosecond / pulsed / laser / at | – | – | Datasheet |
| FS-H-515E | 515 nm | 30~60 W | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | <2%, <1% | – | >100:1 Horizontal | RAD1PS | 20-120 | – | <250 | <1.3 | Femtosecond / pulsed / laser / at | – | – | Datasheet |
| FS-F-515A | 515 nm | 1~2 W | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | 1-2 | – | – | – | – | RAD1PS | 1 | – | – | <1.3 | Femtosecond / pulsed / laser / at | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | – | Datasheet |
| FS-F-515B | 515 nm | 2~8 W | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | <2%, <1% | – | >100:1 Horizontal | RAD1PS | – | – | <300 | <1.2 | Femtosecond / pulsed / laser / at | – | – | Datasheet |
| FS-F-515C | 515 nm | 8~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-F-515D | 515 nm | 20~40 W | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | <10 | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | 100-1000 | <2%, <1% | – | >100:1 Horizontal | RAD1PS | – | – | <300 | <1.3 | Femtosecond / pulsed / laser / at | – | – | Datasheet |
| FS-G-515A | 515 nm | 1~20 W | – | – | – | TEM00 | – | – | – | – | – | <1.3 | – | – | – | – | <10 | Water cooled | 15-35 | – | >10000 | – | – | – | – | – | – | 50-1000 | <2%, <1% | – | >100:1 Horizontal | RAD1PS | – | – | <500 | – | – | – | high repetition | Datasheet |
Femtosecond Laser |
21 models| Model | Wavelength | Output / average power | Repetition rate | Pulse duration (fs) | Ave power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Transverse mode | M2 factor | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber | Single pulse energy (uJ) | pulse | pulse duration, | M2 | Single pulse energy (nJ) | Pulse | Beam quality(M2) | Pulse duration | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FS-H- 515B | 515 nm | 100-1000 mW | 80±1 MHz | <150 | <2%, <1% | <10 | TEM00 | <1.2 | >100:1 Horizontal | Air cooled | 10-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-H- 515C | 515 nm | 1-10 W | 80±1 MHz | <250 | <2%, <1% | <10 | TEM00 | <1.2 | >100:1 Horizontal | Water cooled | 10-35 | RAD1PS | >10000 | Femtosecond / pulsed / laser / at | – | – | – | – | – | – | – | – | Datasheet |
| FS-H- 515D | 515 nm | 10-30 W | 80±1 MHz | <250 | <2%, <1% | <10 | TEM00 | <1.2 | >100:1 Horizontal | Water cooled | 10-35 | RAD1PS | >10000 | Femtosecond / pulsed / laser / at | – | – | – | – | – | – | – | – | Datasheet |
| FS-H- 515E | 515 nm | 30-60 W | 80±1 MHz | <250 | <2%, <1% | <10 | TEM00 | <1.3 | >100:1 Horizontal | Water cooled | 10-35 | RAD1PS | >10000 | Femtosecond / pulsed / laser / at | – | – | – | – | – | – | – | – | Datasheet |
| FS-F- 515A | 515 nm | 1-2 W | 1 MHz | – | – | <10 | TEM00 | <1.3 | – | Water cooled | 10-35 | RAD1PS | >10000 | Femtosecond / pulsed / laser / at | 1-2 | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | – | – | – | – | – | – | Datasheet |
| FS-F- 515B | 515 nm | 2-8 W | 100 kHz-1 MHz | <300 | <2%, <1% | <10 | TEM00 | <1.2 | >100:1 Horizontal | Water cooled | 10-35 | RAD1PS | >10000 | Femtosecond / pulsed / laser / at | – | – | – | – | – | – | – | – | Datasheet |
| FS-F- 515C | 515 nm | 8-20 W | 100 kHz-1 MHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FS-F- 515D | 515 nm | 20-40 W | 100 kHz-1 MHz | <300 | <2%, <1% | <10 | TEM00 | <1.3 | >100:1 Horizontal | Water cooled | 10-35 | RAD1PS | >10000 | Femtosecond / pulsed / laser / at | – | – | – | – | – | – | – | – | Datasheet |
| FS-G- 515A | 515 nm | 1-20 W | 50 kHz-1 MHz | <500 | <2%, <1% | <10 | TEM00 | – | >100:1 Horizontal | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | high repetition | <1.3 | – | – | – | – | Datasheet |
| FS-H- 5 32B | 532 nm | 100-2000 mW | 80±1 MHz | <150 | <2%, <1% | <10 | TEM00 | – | >100:1 Horizontal | Air cooled | 10-35 | RAD1PS | >10000 | – | – | – | – | <1.2 | – | – | – | – | Datasheet |
| FS-H- 1030B | 1030 nm | 500-3000 mW | 80±2 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Air cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | <1.2 | 6.25-30 | <150 | – | – | Datasheet |
| FS-H- 1030C | 1030 nm | 3-20 W | 80±2 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | <1.2 | – | <250 | – | – | Datasheet |
| FS-H- 1030D | 1030 nm | 20-50 W | 80±2 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | duration, / high | – | <1.2 | – | – | – | – | Datasheet |
| FS-H- 1030E | 1030 nm | 50-100 W | 80±2 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | duration, / high | – | <1.3 | – | – | – | – | Datasheet |
| FS-F- 1030A | 1030 nm | 1-10 W | 1 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | duration, / high | – | – | – | – | <1.3 | – | Datasheet |
| FS-F- 1030B | 1030 nm | 10-20 W | 1 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | <300 | <1.2 | – | Datasheet |
| FS-F- 1030C | 1030 nm | 20-50 W | 1 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | <300 | <1.2 | – | Datasheet |
| FS-F- 1030D | 1030 nm | 50-100 W | 1 MHz | – | <2%, <1% | <10 | TEM00 | – | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | <1.3 | <300 | Datasheet |
| FS-G- 1030A | 1030 nm | 1-10 W | 50 kHz-1 MHz | <800 | – | <10 | TEM00 | <1.3 | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-G- 1030B | 1030 nm | 10-40 W | 50 kHz-1 MHz | – | – | <10 | TEM00 | <1.3 | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | – | <800 | Datasheet |
| FS-H- 10 64B | 1064 nm | 500-5000 mW | 80±2 MHz | – | <2%, <1% | <10 | TEM00 | <1.2 | >100:1 Vertical | Air cooled | 10-35 | RAD1PS | >10000 | – | – | duration, / high | – | – | 6.25-62.5 | – | – | – | Datasheet |
Infrared Laser AT 2120 NM
2 models| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Rep.rate (kHz) | Single pulse energy (µJ) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OEM-AO-2120 | 2120 nm | 1~3 W | <5%, <3% | 10 | 100-300 | <3 | Water cooled | 10-30 | PSU-MIR (3U) | >10000 | – | – | Datasheet |
| OEM-IR-2120 | 2120 nm | 1~10 W | – | – | – | <3 | Water cooled | 10-30 | PSU-MIR (3U) | >10000 | <5%, <3% | <10 | Datasheet |
3440 NM MID Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-PS-3440 | 3440 nm | 1~1000 mW | <3%, <2%, <1% | <10 | Waterr cooled | 15-30 | RAD1PS | >10000 | Datasheet |
3640 NM MID Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-PS-3640 | 3640 nm | 1~1000 mW | <3%, <2%, <1% | <10 | Waterr cooled | 15-30 | RAD1PS | >10000 | Datasheet |
3.9 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Rep.rate (kHz) | Pulse duration (ns) | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2,mm) | Operating temperature (℃) | Power supply (90-264VAC) | Expected lifetime (hours) | Warranty period | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HPL-MIR-3900 | 3900 nm | 1~1000 mW | <3%, <5% | 10 | <50 | <5 | <6 | 15~35 | PSU-MIR (3U) | 10000 | 1 year | Datasheet |
4 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|
| HPL-MIR-4000 | 4000 nm | 1~2 W | <3%, <5% | PSU-MIR (3U) | Datasheet |
4.2 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|
| HPL-MIR-4200 | 4200 nm | 1~2 W | <3%, <5% | PSU-MIR (3U) | Datasheet |
4.5 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| HPL-MIR-4500 | 4500 nm | 1~2 W | Datasheet |
4.8 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|
| HPL-MIR-4800 | 4800 nm | 1~2000 mW | <3%, <5% | PSU-MIR (3U) | Datasheet |
656 NM RED Laser.
1 model| Model | Wavelength | Output / average power | Power stability(rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time | Expected lifetime (hours) | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PGL-V-H-655 | 656 nm | 1~1000 mW | <5%, <3%, <1% | Near TEM00 / Multimode | <1.5 / <3.5 | minutes / <10 | 10000 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
523.5 NM Green Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| AO-U-524/1mJ | 524 nm | 3 W |
Optical Spectrum Analyzer, Spectrometer |
1 model| Model | Wavelength | |
|---|---|---|
| LED light source/ solid-state light source | — |
THE Manufacturer Q Switched 1064nm Laser
31 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Operating voltage（VDC） | Expected lifetime（hours） | Beam diameter at the aperture 1/e2 (mm) | Power supply (100-240VAC) | Operating temperature | Jitter (ns, sdev) | energy | pulse | Beam diameter (mm) | Expected lifetime (pulses) | Energy stability (std dev/mean) | Power supply (110/220VAC) | Expected lifetime (pluses) | M2 | Pointing stability over temperature (urad/℃) | Power supply (24VDC) | Polarization | Relative humidity | Power supply (220/110VAC) | Warranty period | Power supply | Jitter (ns, sdev) (optional) | Warm-up time(minutes) | Power supply (220VAC) | Energy stability | Power supply (220/380VAC) | (Fan cooled) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-1064A | 1064 nm | 1000 mW& 500 | 1000 uJ & 500 uJ | 1-10 kHz | ~12 ns @1 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Horizontal | <10 | Air cooled | 10-35 | 12V/25A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-1064W-HE | 1064 nm | 20 W | 2 mJ | 5-100 kHz | ~20 ns @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | Water cooled | 10-35 | 24V/20.9A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-1064 | 1064 nm | 500-3000 mW | 10-200 uJ | 1-300 kHz | ~20 ns @10 kHz~15 @50 kHz~15 @300 kHz | <2%, <1% | <1.2 | TEM00 | < 4.5 | – | <10 | Air cooled | 10-35 | – | – | 24V/14.5A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-1064 | 1064 nm | 1-2500 mW | 1-350 uJ | 1 Hz-100 kHz | 5-11 ns @<10 kHz | <5%, <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Horizontal (Vertical optional) | <10 | – | 10-35 | – | >10000 | – | – | ~1.2 | PSU-AOM-DL | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-1064 | 1064 nm | 1-7 W | 1-700 uJ | 1-100 kHz | 35 ns @10 kHz | <2%, <1% | <1.1 | TEM00 | <3.5 | >100:1 Horizontal | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-1064-HE | 1064 nm | 2/ 4 W | 2 mJ | 1 Hz-10 kHz | ~12 ns @1 kHz | <2%, <1% | <1.2 | – | <4 | >100:1 | <10 | Air cooled | 10-35 | 24V/20.9A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-UA-1064 | 1064 nm | 1-3 W | 300-500 uJ | 1 Hz~10 kHz | ~10 ns @1 kHz~15 @5 kHz~25 @10 kHz | <2%, <1% | <1.2 | – | ~3.5 | >100:1 Vertical | <10 | Air cooled | – | – | >10000 | – | – | – | PSU-AOM | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-V-1064A | 1064 nm | 10/ 20 W | 1 mJ | 1-10 kHz 20-200 kHz | 12 ns @<20 kHz | <2%, <1% | <1.2 | – | <1.5 | >100:1 Horizontal | <10 | Air cooled | 10-35 | 24V/21A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-X-1064 | 1064 nm | 1-20 W | 1-670 uJ | 10-100 kHz | ~20 ns @30 kHz | <5%, <3% | <1.5 | – | <2 | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-D | 1064 nm | 100-1000 mW | 1-10 mJ | 1-100 Hz | <10 ns | – | ≤1.5 | – | ≤3 | – | – | Air cooled | 15-35 | 24V/18.8A | – | – | – | – | – | – | <1ns (Int.) | diode / pumped / all / solid / state | energy, / short / pulse | ~1 / ~2 | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-H | 1064 nm | 15-30 W | 15-30 mJ | 1~1000 Hz | <5 ns | – | <1.5 | – | <2 | – | – | Water cooled | 15-35 | – | – | – | – | – | – | – | <1ns (Int.) | – | energy, / high / beam | ~2.5 | – | <3%,<2%,<1% | PSU-DPS-H | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-LR | 1064 nm | 1-1.6 W | 50-80 mJ | 20 Hz | < 10 ns | – | – | – | ≤0.5 | – | <15 | Air cooled | -40-60 | 24V/18.8A | – | – | – | – | – | – | – | – | energy, / short / pulse | ~30 | 5×107 | <2%, <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-Pico | 1064 nm | 5-30 W @1 MHz | 5-30 uJ @1 MHz | 100 kHz-10 MHz (adjustable) | <50 ps 50-1000(adjustable) | <3%, <2%, <1% | <1.5 | – | – | – | – | Air cooled (DPS-1064-Pico-I); Water cooled (DPS-1064-Pico-II) | 15-30 | – | >10000 | – | – | – | – | – | – | – | – | ~2 | – | – | PSU-DPS-Pico | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-Q | 1064 nm | 100-4000 mW | 1-40 mJ @1-100 Hz | 1-1000 Hz | ~10 ns | – | – | – | <2 | – | <15 | Water cooled | 15-35 | – | – | – | – | – | – | – | <1ns (Int.) | – | energy, / short / pulse | ~2 / ~2.5 / ~3 / ~4 / ~2 | 109 | <3%, <2% / <3%, <2%,(<1% optional) / <3%, <2% | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-H | 1064 nm | 3-4.5 W @3 kHz | 1-1.5 mJ @3 kHz | 1-10 kHz | ~7 ns @5 kHz | <2%, <1% | <1.5 | – | <3 | – | – | Conduction (EO-1064-H-I) / Air cooled (EO-1064-H-II) | -20~55 | – | >10000 | – | – | – | – | – | – | – | energy, | ~1 | – | – | – | – | <1.5 / <2 | <20 | PSU-EO-H (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-PS | 1064 nm | 5-20 W @1 MHz | 1-150 uJ | 1-100 Hz | <15 ps | <5%, <3% | ≤1.3 | – | ≤2 | – | <15 | Water cooled | 15-30 | – | >10000 | – | – | – | – | – | – | – | – | 1.5±0.5 | – | – | PSU-EO-PS | – | – | <50 | – | 100:1 | <60% | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-HS-1064 | 1064 nm | 1-21 W | 1-420 uJ | 1-100 kHz | ~5 ns @50 kHz | <3% | 2 | – | – | – | <10 | Water cooled | 10~35 | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-AOM(4U) | 1 year | – | – | – | – | – | – | – | Datasheet |
| EO-LS-1064 | 1064 nm | 0.5-13 W | 300-600 uJ | 1-10 kHz | < 7 ns | <5%, <3% | <1.3 | – | <1.5 | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 100-240VAC | – | – | – | – | – | – | Datasheet |
| EO-RS-1064 | 1064 nm | 1-100 W | 1-4 mJ | 20-100 kHz | 5 ns @50 kHz | <5%, <3% | – | – | <2 | – | – | Water cooled | 10-35 | – | >10000 | – | – | – | 24V/42A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-1064-RS | 1064 nm | 1-1500 mW | 1-300 uJ | 1 Hz-100 kHz | ~1.3-1.8 ns @1 kHz | <3%, <2%, <1% | <1.5 | TEM00 | – | – | – | – | 10-35 | – | >10000 | – | – | ~1.0 | PSU-EOM-DL/PSU-EOM-L (optional)5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <0.2 (Ext) | – | – | – | – | – | Datasheet |
| EO-XS-1064 | 1064 nm | 1-10 W | 1~200 uJ | 10-100 kHz | ~4 ns @50 kHz | <5%, <3% | <1.5 | – | <3 | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1064A-PA | 1064 nm | 1-4 W | 5-20 mJ | 200 Hz | ~10 ns | <5%, <3% | – | – | <2 | – | – | Water cooled | 15-35 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <10 | PSU-HPL-PA | – | – | – | Datasheet |
| LPS-1064-M | 1064 nm | 20-200 W | 1-10 J | 1-20 Hz | ~0.1-20 ms | – | – | – | – | – | <15 | Water Cooled | 15~35 | – | – | – | – | – | – | – | – | – | – | ~8 | – | – | – | – | – | – | – | – | – | – | 1 year | – | – | – | – | <3% | PSU-LPS-M(3U) | – | Datasheet |
| LPS-1064-Q | 1064 nm | 3.5-8.5 W | 350-850 mJ | 1-10 Hz | ~10 ns | – | – | – | <3 | – | <15 | Water cooled | 15-35 | – | – | – | – | – | – | – | <1ns (Int.) | lamp / pumped / solid / state | – | ~7 / ~9 | 107-108 | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Mini-E-PA-1064 | 1064 nm | 4 W | 200 uJ | 10-20 kHz | ~5 ns | <2%, <1% | – | TEM00 | <3.5 | – | <15 | – | 10-35 | – | >10000 | – | – | – | PSU-12-P | – | – | – | – | – | – | – | – | – | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-H-1064 | 1064 nm | 500-1500 mW | 20-100 uJ | 1 Hz-30 kHz | 3-10 ns | <3%, <2%, <1% | – | TEM00 | <2. 0 | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064A-HP | 1064 nm | 200-4000 mW | 2-40 uJ | ~100 kHz | ~0.5 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | Fan cooled | 10-35 | – | >10000 | – | – | – | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064B-HP | 1064 nm | ~2000 mW | ~50 uJ | ~40 kHz | ~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | Fan cooled | 10-35 | – | >10000 | – | – | – | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064-HP | 1064 nm | 200-1000 mW/ 200-2000 | 200-500/ 200-1000 uJ | 1 Hz-1 kHz/ 1-4 kHz | ~0.5/~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | Fan cooled / Water cooled | 10-35 | – | >10000 | – | – | – | PSU-S-HP | – | – | – | – | – | – | – | – | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | (Water cooled) | Datasheet |
| MPL-U-1064A-SU | 1064 nm | 400-1000 mW | 40-100 uJ | 1 Hz-15 kHz | ~1.5 ns | <3%, <2%, <1% | <2.0 | TEM00 | – | – | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA/ PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-1064-SU | 1064 nm | 1.5-2 W | 100-200 uJ | 1 Hz-15 kHz | ~5 ns | <3%, <2%, <1% | – | TEM00 | – | – | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA/ PSU-SR | – | – | – | – | – | – | – | – | – | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
THE Manufacturer High Energy Q Switched Laser
26 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Cooling method | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Operating temperature | Operating voltage (VDC) | Operating temperature (℃) | Power supply (100-240VAC) | M2 | Jitter (ns, sdev) | energy | Beam diameter (mm) | Power supply (110/220VAC) | Expected lifetime (pulses) | of short pulse duration, high repetition rate | Energy stability (std dev/mean) | Pointing stability over temperature (urad/℃) | Power supply (24VDC) | Power supply | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-532 | 532 nm | 8-100 W | 600 uJ | 20-400 kHz | ~13 ns @60 kHz | <2%, <1% | <1.2 | TEM00 | <3.5 | >100:1 Vertical | <10 | Water cooled | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532A | 532 nm | 8/ 10 W | 260 uJ | 20-200 kHz | ~12 ns @30 kHz | <2%, <1% | <1.2 | TEM00 | ~3.5 | >100:1 Vertical | <10 | – | >10000 | ~0.8 | Air cooled | 10-35 | 12V/25A | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532W-HE | 532 nm | 20 W | 2 mJ | 7-20 kHz | ~18 ns @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | – | >10000 | – | Water cooled | – | 24V/20.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532W-LP | 532 nm | 20-30 W | 2-3 mJ | 6-20 kHz | ~100 ns @10 kHz~30 @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | – | >10000 | – | Water cooled | – | 24V/20.9A / 36V/13.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-K-280&295&532&560 | 280 nm | 100 mW & 100 & 1000 & 500 | 20& 20& 200& 100 | 1-10 kHz | ~20 ns @5 kHz | <5%, <3%, <2% | – | – | <3.5 | – | <10 | – | >10000 | – | Air cooled | – | 24V/42A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-L-532 | 532 nm | 1-3 W | 500-600 uJ | 1 Hz-10 kHz | 5-7 ns @5 kHz | <3%, <2%, <1% | – | – | ~4.5 | >100:1 Vertical | <10 | – | >10000 | – | Air Cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-532 | 532 nm | 1-5000 mW | 1-400 uJ | 1 Hz-100 kHz | ~7 ns @1 Hz-1 kHz | <2%, <1% | <1.2 | TEM00 | < 3 | >100:1 Horizontal | <10 | – | >10000 | – | Air cooled | – | 24V/14.5A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-532-H | 532 nm | 1-1000 mW | 1-250 uJ | 1 Hz-100 kHz | ~4.8 ns @10 kHz | <3%, <2%, <1% | – | TEM00 | – | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-AOM-DL | <1.5 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-532 | 532 nm | 1-6 W | 1-600 uJ | 1-100 kHz | 30~100 ns can be customized @10 kHz | <2%, <1% | <1.1 | TEM00 | <3.5 | >100:1 Vertical | <10 | – | ＞10000 | – | Air cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-532A | 532 nm | 2 W | 1 mJ | 2-8 kHz | ~23 ns @2 kHz | <2%, <1% | <1.2 | TEM00 | <3.5 | >100:1 Vertical | <10 | – | ＞10000 | – | Air cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-532 | 532 nm | 3000 mW & 400 | 500-1000 uJ & 60-80 uJ | 1-10 kHz | ~12 ns | <3%, <2%, <1% | <1.2 | – | <4.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | 10-35 | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-532-HE | 532 nm | 2/ 4 W | 2 mJ | 1 Hz-10 kHz | <10 ns @1 kHz | <2%, <1% | <1.2 | – | <4 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | – | 24V/20.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-UA-532 | 532 nm | 300/ 2.5-3.5 W | 300~800 uJ | 1 Hz-10 kHz | ~10 ns @1 kHz~15 @5 kHz | <2%, <1% | <1.2 | – | ~3.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | 10-35 | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-X-532 | 532 nm | 1-20 W | 1-670 uJ | 30-100 kHz | ~15 ns @30 kHz | <5%, <3% | <2 | – | – | – | <10 | – | >10000 | – | Water cooled | – | – | 10-35 | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-H | 532 nm | 5-10 W @1000 Hz | 5-10 mJ | 1-1000 Hz | <4 ns | – | <1.5 | – | <2 | – | – | – | – | – | Water cooled | – | – | 15-35 | – | – | <1ns (Int.) | diode / pumped / all / solid / state | ~2.5 | PSU-DPS-H | 109 | – | – | – | – | – | Datasheet |
| DPS-532-Pico | 532 nm | 2-10 W @10 MHz | 0.2-1 uJ @10 MHz | 0.1-10 MHz | <50 ps | <3%, <2%, <1% | <1.5 | – | – | – | – | – | >10000 | – | Air cooled (DPS-532-Pico-I); Water cooled (DPS-532-Pico-II) | – | – | 15-30 | – | – | – | – | – | PSU-DPS-Pico | – | Beam diameter (mm) / ~2 | – | – | – | – | Datasheet |
| DPS-532-Q | 532 nm | 0.1-2 W @100 Hz | 1-20 mJ | 1-1000 Hz | ~10 ns | – | – | – | <2 | – | <15 | – | – | – | Water cooled | – | – | 15-35 | – | – | <1ns (Int.) | – | ~2 / ~2.5 / ~3 / ~4 / ~2 | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | 109 | – | <5%, <3% | – | – | – | Datasheet |
| EO-532-G | 532 nm | 250-3750 mW @25 kHz | 10-1500 uJ @2 kHz | 1-100 kHz | <8 ns @5 kHz | <2%, <1% | <1 | – | <3 / <3 | – | <15 / <15 | – | >10000 | – | Air cooled (EO-532-G-I)or Water cooled (EO-532-G-III)5 / Air cooled (EO-532-G-II) | – | – | 15-30 / 15-30 | – | – | – | – | ~1 / ~1 | – | – | – | – | <20 / <20 | PSU-EO-G (24V/13A) / PSU-EO-G (24V/13A) | – | Datasheet |
| EO-532-H | 532 nm | 1.2-2.4 W @3 kHz | 0.4-0.8 mJ @3 kHz | 1-10 kHz (fixed) | <6 ns @5 kHz | <2%, <1% | <1.5 | – | <3 | – | – | – | >10000 | – | Conduction (EO-532-H-I) / Air cooled (EO-532-H-II) | – | – | -20-55 | – | <1.5 / <2 | – | – | ~1 | – | – | – | – | <20 | PSU-EO-H (24V/13A) | – | Datasheet |
| EO-HS-532 | 532 nm | 1-12 W | 1-200 uJ | 15-100 kHz | ~4 ns @50 kHz | <5%, <3% | 2 | – | <3 | – | <10 | – | >10000 | – | Water cooled | – | – | 10-35 | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-LS-532 | 532 nm | 0.6-15 W | 0.3-2 mJ | 1-10 kHz | < 6 ns @10 kHz | <5%, <3% | 1.3 | – | <1.5 | – | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | 100-240VAC | Datasheet |
| EO-RS-532 | 532 nm | 1-35 W | 1-1.5 mJ | 20-100 kHz | 4 ns @50 kHz | <5%, <3% | – | – | <2 | – | – | – | >10000 | – | – | – | – | 10-35 | 24V/42A | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-XS-532 | 532 nm | 1-5 W | 1-125 uJ | 1-100 kHz | ~4 ns @40 kHz | <5%, <3% | – | – | <3 | – | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | PSU-AOM (3U) | ＜1.5 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-Q | 532 nm | 1.5-5 W @10 Hz | 150-500 mJ | 1-10 Hz | <10 ns | – | – | – | <3 | – | <15 | – | – | – | Water cooled | – | – | 15-35 | – | – | <1ns (Int.) | – | ~7 / ~9 | PSU-LPS-Q(3U) | 107-108 | – | <3%, <2%, (<1% optional) | – | – | – | Datasheet |
| MPL-N-532 | 532 nm | 150-1500 mW | 60-125 uJ | 1-15 kHz | < 2/~5 ns | <5%, <3%, <2% | <1.5 | TEM00 | <2 | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-N-FDA/PSU-N-LED | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532A-HP | 532 nm | 100-1500 mW | 1-15 uJ | ~100 kHz | ~0.5 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | – | >10000 | – | Fan cooled | – | – | 10-35 | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
1064 NM Marking Laser Series |
3 models| Model | Wavelength | Output / average power | Pulse energy | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | M2 | Polarization ratio | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-I-1064 | 1064 nm | 20 W | ~800 uJ | – | – | – | – | – | – | – | – | – | |
| AO-V-1064 | 1064 nm | 12 W/ 15 W | ~600 uJ | <2%，<1% | <1.5 | <1.2 | >100:1 Horizontal | <10 | Air cooled | 10-35 | 24V/21A | >10000 | Datasheet |
| FL-1064 | 1064 nm | 3 W/ 4 W/ 6 W/ 8 W/ 10 W | ~200 uJ | – | – | – | – | – | – | – | – | – | Datasheet |
Mode Locked & Picosecond Laser |
1 model| Model | Wavelength | Output / average power | Repetition rate | Power stability | M² | Single pulse energy (mJ) | Pulse duration (ps) | Energy stability (std dev/mean) | Beam divergence, full angle (mrad) | M2 | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (110/220VAC) | Expected lifetime (pulses) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPS-1064-PS | 1064 nm | 5-20 W | 0-1000 kHz | <3%, <5% | ≤1.3 | 1-30 | <500 | <5%, <3%, <2% | <3 | <2 | <15 | Water cooled | 15-30 | PSU-DPS-Subnano | 109 | Datasheet |
High Energy Laser |
1 model| Model | Wavelength | Pulse energy | Repetition rate | Power stability | energy | high single pulse energy，high output power， | Pointing stability over temperature (urad/°C) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (110/220VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPS-527-Q | 527 nm | 1-20 mJ | 0.2-10 kHz fixed | <2%, <1%, <0.5% | diode / pumped / all / solid / state | Beam divergence, full angle (mrad) / ~5 | <50 | <15 | Water cooled | 15-35 | PSU-DPS-Q | >10000 | Datasheet |
RGB Laser |
65 models| Model | Wavelength | Output / average power | Power stability | Fiber type | Fiber Core Diameter(μm) | Fiber Connector | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Expected lifetime (hours) | Warranty | Fiber Core Diameter (μm) | Cooled method | Fiber Core Diameter (um) | Fiber Jacket | Operating voltage (VAC) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-1030/1064/1270/1310/1532 | 1030 nm | 5/10/4/4/1 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-1064/1064/1064/1064-CH | 1064 nm | 20/20/20/20 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-375/405/450/520/640/660/980 | 375 nm | 0.3/2/3/1.3/1/1.5/10 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-375/405/520/660/785/980 | 375 nm | 0.3/2/1.3/1.5/4/10 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-375/520 | 375 nm | 0.3/1.3 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-375/520/808 | 375 nm | 0.3/1.3/ 5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-405/488 | 405 nm | 2/2 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-405/488/520/640 | 405 nm | 2/2/1.3/1 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-405/488/520/640/1064 | 405 nm | 2/2/1.3/1/10 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-405/488/660 | 405 nm | 2/ 2/1.5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-405/520/640/808/940/1125/1470 | 405 nm | 2/1.3/1/5/5/4/1.5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-405/520/640/830/1064/1550 | 405 nm | 2/1.3/1/2.5/10/2.5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-405/520/660/808/1550 | 405 nm | 2/1.3/1.5/5/2.5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-450/1470 | 450 nm | 10/15 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-450/520/640 | 450 nm | 3/1.3/1 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-450/520/640/852 | 450 nm | 3/1.3/1/1.5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-450/520/640/915/1320 | 450 nm | 3/1.3/1/5/4 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-450/520/660/785/980/1064/1320 | 450 nm | 3/1.3/1.5/4/10/10/4 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-450/532/635-CH | 450 nm | 2/2/1.3 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-450/532/660-CH | 450 nm | 1/1/1 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-450/640 | 450 nm | 3/1 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-450/640/1064 | 450 nm | 3/0.2/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-450/640/808 | 450 nm | 3/0.2/15 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-450/640/808/915/980/1064 | 450 nm | 3/0.2/8/10/10/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-450/640/808/980 | 450 nm | 3/0.2/8/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-450/640/915 | 450 nm | 10/0.2/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-450/640/980 | 450 nm | 3/0.2/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-450/640/980/1064 | 450 nm | 3/0.2/10/10 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-450/660 | 450 nm | 10/0.2 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-450/660/808 | 450 nm | 3/1/8 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-450/980 | 450 nm | 10/20 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-488/520/690/785/940 | 488 nm | 2/1.3/1/4/5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-520/660/785/980 | 520 nm | 1.3/1.5/4/10 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-520/808/860/1030/1064/1310 | 520 nm | 1.3/5/7/5/10/4 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-520/830/885/1030/1064/1310/1550 | 520 nm | 1.3/2.5/2.5/5/10/4/2.5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-532/640/808/1064-CH | 532 nm | 1/0.2/0.2/1 W | <1% | SM fiber | 4~9 | FC/APC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-639/650/660-CH | 639 nm | 0.9/0.1/1.3 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-640/1470 | 640 nm | 0.2/30 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-640/1470/1940 | 640 nm | 0.2/15/7 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-640/1940 | 640 nm | 0.2/12 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-640/808 | 640 nm | 0.2/15 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-640/808/915 | 640 nm | 0.2/8/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-640/808/915/1064 | 640 nm | 0.2/8/10/10 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-640/808/915/980/1064 | 640 nm | 0.2/8/10/10/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-640/808/980/1064 | 640 nm | 0.2/10/15/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-640/980 | 640 nm | 0.2/20 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-640/980/1064/1470 | 640 nm | 0.2/15/15/15 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-640/980/1470 | 640 nm | 0.2/30/30 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400/ 200 | – | – | – | – | – | Datasheet |
| FC-660/808-CH | 660 nm | 2/2 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-665/671/680-CH | 665 nm | 1.5/1/1 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-690/740/830/915/980/1550/1870 | 690 nm | 1/2/2.5/5/10/2.5/0.5 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-690/750/880-CH | 690 nm | 1/2/2 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-690/760/808/852/915/980 | 690 nm | 1/5/5/1.5/5/10 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-808/1064 | 808 nm | 30/30 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-808/915 | 808 nm | 30/30 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-808/976-CH*2 | 808 nm | 20/20 W | <1% | MM fiber | 400 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-808/980 | 808 nm | 30/30 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-808/980/1064 | 808 nm | 20/20/20 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-810/980 | 810 nm | 10/10 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-830/915/1064/1310 | 830 nm | 2.5/5/10/4 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | – | – | – | – | – | – | Datasheet |
| FC-980/1064 | 980 nm | 30/30 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-980/1470 | 980 nm | 20/15 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-980/1470/1940 | 980 nm | 15/15/7 W | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-980/1940 | 980 nm | 10/7 W | <1% | MM fiber | – | SMA905 | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | 400 | – | – | – | – | – | Datasheet |
| FC-W-638/525/450/940/980C | 638 nm | 71 W | <1% | – | – | SMA905, FC/PC optional | – | <5 | 0-30 | >10000 | – | – | Air cooled | 200, 400, 0.22NA | PVC, Metal optional | 100-240 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser,1380 NM Infrared Diode Lasers,infrared Diode Laser System.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-1380 | 1380 nm | 1~10 W | |
| FC-W-1380H | 1380 nm | 1~200 W |
Infrared Laser,1470 NM Infrared Diode Lasers,infrared Diode Laser System.
5 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-1470 | 1470 nm | 1~10 W | |
| FC-W-1470H | 1470 nm | 10~50 W | |
| MDL-1470(FC) | 1470 nm | 1~3000 mW | |
| MDL-H-1470 | 1470 nm | 500~1500 mW | |
| MLL-H-1470 | 1470 nm | 500~1500 mW |
1710 NM IR Laser, Infrared Diode Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-1710 | 1710 nm | 1~1300 mW | |
| FC-W-1710H | 1710 nm | 1~100 W |
410 NM Blue Violet Diode Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-410 | 410 nm | 1~10 W |
415 NM Blue Violet Diode Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-415 | 415 nm | 1~5 W |
438 NM Blue Violet Diode Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-438 | 438 nm | 1~1250 mW |
440 NM Laser, Violet Blue Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-440 | 440 nm | 1~20 W | |
| MDL-440(FC) | 440 nm | 1~2500 mW |
470nm Blue Laser, Blue Diode Laser, Diode Laser Module |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-470 | 470 nm | 1~20 W |
740 NM RED Diode Laser.
4 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-740 | 740 nm | 1~5 W | |
| MDL-740(FC) | 740 nm | 1~2000 mW | |
| MDL-H-740 | 740 nm | 1~1000 mW | |
| MDL-XF-740 | 740 nm | 1~2.5 W |
755 NM RED Laser, RED Diode Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-755 | 755 nm | 1~10 W | |
| MDL-755(FC) | 755 nm | 1~2600 mW |
Ultra Compact OEM Laser,405 NM 1319 NM OEM Laser |
7 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Spectral line width (nm) | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Transverse mode | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Power supply (12VDC) | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Storage temperature (℃) | Modulation option | Fiber Jacket | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1064-B | 1064 nm | 1000 mW | – | <2%, <1%, <0.5% | – | <0.2, (<0.1 optional) | MM fiber | 105μm, 0.22NA | SMA905, FC/PC optional | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-I-532 | 532 nm | 1-5000 mW | – | <3%, <2%, (<1% optional) | – | – | – | – | – | – | – | – | – | – | – | >10000 | Near TEM00 | ~1.0 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-OEM-I / PSU-I-HS | – | – | – | – | – | – | – | – | Datasheet |
| YL-I-638/520/450/808/1064 | 638 nm | 74 W | – | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | >10000 | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| YL-I-638/520/450/808/980 | 638 nm | 71 W | – | <2%, <1% | – | – | – | – | – | – | – | – | Air cooled | – | – | >10000 | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PVC, Metal optional | – | – | Datasheet |
| YL-I-638/525/450/808/980 | 638 nm | 71 W | – | <2%, <1% | – | – | – | – | – | – | – | – | Air cooled | – | – | >10000 | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | -20-50 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PVC, Metal optional | – | – | Datasheet |
| YL-I-640 | 640 nm | 8 W | 2 nm | <2%, <1% | 0.5% | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | – | – | – | – | – | 100, 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | – | – | PVC, Metal optional | 0-30 | 100-240 | Datasheet |
| YL-I-660 | 660 nm | 8 W | 2 nm | <2%, <1% | 0.5% | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | – | – | PVC, Metal optional | 0-30 | 100-240 | Datasheet |
LOW Noise Fiber Laser |
5 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | Current adjustment range | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Pointing stability (urad) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Frequency shift (MHz) (over ±2℃and 8 hours) | characteristics of ultra-stable output power, | Free space output power (W) | Operating voltage (VAC) | Fundamental Frequency | Free space output power (mW) | Fiber coupled output power (mW) | Frequency shift (MHz) (over ±2℃and 8hours ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1064-LN-H | 1064 nm | 10-50 W | <0.004 nm | <1%, <0.5% | <0.05% | – | TEM00 | SLM | 1-100% | <1.1 | Collimator | <3 | Metal | 4±1 (Collimator output) | <5 / <10 | >15, after PM fiber | <30 | Air cooled (≤20W) / Water cooled (≤50W) | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| FL-1064-LN-L | 1064 nm | 1-10000 mW | <0.004 nm | <2%, <1%, <0.5% | <0.05% | <1.1 | TEM00 | SLM | 1-100% | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | – | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <±200 | – | – | – | – | – | – | – | Datasheet |
| FL-1550-LN-L | 1550 nm | 1-10000 mW | <0.004 nm | <2%, <1%, <0.5% | <0.05% | <1.1 | TEM00 | SLM | – | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | <5 / <10 | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | Current adjustment range / 1-100% | – | – | – | – | – | – | Datasheet |
| FL-532-LN-H | 532 nm | 3-10 W | <0.002 nm | <2%, <1% | <0.1% | – | TEM00 | SLM | 1-100% | <1.1 | – | – | – | ~1 | <15 / <50 | >20 Horizontal (Vertical optional) | <30 | Water cooled | 15-30 | – | >10000 | – | – | 3-10 | 110/220V | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | Datasheet |
| FL-532-LN-L | 532 nm | 1-3000 mW | <0.002 nm | <2%, <1% | <0.05% | – | TEM00 | SLM | 1-100% | <1.1 | FC/APC | 1 | PVC, Metal optional | – | – | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | – | >10000 | – | – | – | 110/220V | – | 1-3000 | 1-500 | <±200 | Datasheet |
Nanosecond Fiber Laser |
3 models| Model | Wavelength | Output / average power | Pulse width | Power stability | M² | High frequency all fiber pulsed laser at | M2 | Rep. rate | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization ratio(dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC/VAC) | Expected lifetime (hours) | frequency | stability, | Polarization ratio (dB) | Transverse mode | Polarization state (dB) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1064-Nano | 1064 nm | 0.5-30 W | 0.5-250 ns (Adjustable) | <3%, <2% | <1.3 | Power stability (rms, 4 hours ±3℃) / <3%, <2% | <1.8 / <1.3 | 100kHz-1MHz(adjustable) / 20kHz-1MHz | FC/APC, Collimator optional / Collimator | 1 / 4 | PVC, Metal optional | 4±1 (Collimator output) / 6±1 (Collimator output) | Random / > 15 | <15 | Air cooled | 15-35 | 12V/11.5A or 110/220VAC / 24V/21A | >10000 | – | – | – | – | – | Datasheet |
| FL-1080-Nano | 1080 nm | 0.5-10 W | 0.5-250 ns (Adjustable) | <3%, <2% | <1.8 | – | – | 100kHz-1MHz (adjustable) | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 12V/11.5A or 110/220VAC | >10000 | all / fiber / pulsed / laser / at | good / beam / profile, / ultra | Random / >15 | – | – | Datasheet |
| FL-1550-Nano | 1550 nm | 50-1000 mW | 0.5-50 ns (Adjustable) | <3%, <2% | <1.5 | – | – | 50kHz-1MHz | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | – | – | Air cooled | 15-35 | 12V/11.5A or 110/220VAC | >10000 | – | – | – | TEM00 | Random / >15 | Datasheet |
Picosecond Fiber Laser |
7 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | M² | stability, | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC/VAC) | Expected lifetime (hours) | fiber | M2 | Operating voltage (VDC) | Delivery fiber length (cm) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1064-Pico | 1064 nm | 10-5000 mW | 0.1-20 MHz | 100-900 ps | <3%, <2% | <1.2 | M2 / <1.2 / <1.8 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | – | – | – | – | Datasheet |
| FL-1064-PS | 1064 nm | 1-2000 mW | 20-60 MHz | <10 ps | <3%, <2%, <1%, <0.5% | <1.2 | – | – | – | – | – | Random / > 15 | <15 | Air cooled | 15-35 | – | >10000 | pulsed / laser / at | <1.2 / <1.5 | 12V/11.5A | – | – | Datasheet |
| FL-1070-Pico | 1070 nm | 10-5000 mW | 0.1-20 MHz | 100-900 ps | <3%, <2% | <1.2 | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | <1.2 / <1.8 | – | – | – | Datasheet |
| FL-1080-Pico | 1080 nm | 10-5000 mW | 0.1-20 MHz | 100-900 ps | <3%, <2% | <1.2 | M2 / <1.2 / <1.8 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | – | – | – | – | Datasheet |
| FL-1550-Pico | 1550 nm | 100-1000 mW | 0.1-20 MHz | 100-900 ps | <3%, <2% | <1.2 | Rep. rate3 / 100kHz-20MHz | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / > 15 | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | – | – | – | – | Datasheet |
| FL-1550-PS | 1550 nm | 1-2000 mW | 20-60 MHz | <10 ps | <3%, <2%, <1%, <0.5% | <1.2 | – | – | – | – | – | Random / > 15 | <15 | Air cooled | 15-35 | – | >10000 | pulsed / laser / at | <1.2 / <1.5 | 12V/11.5A | – | – | Datasheet |
| FL-532-Pico | 532 nm | 1-1000 mW | 0.1-20 MHz | 100-900 ps | <5%, <3%, <2% | <1.5 | – | – | – | – | – | >15 Horizontal (Vertical optional) | – | Air cooled | 15-35 | – | >10000 | – | <1.5 / <2 | 12V/11.5A | 60 | Second harmonic | Datasheet |
Single Frequency Fiber Laser |
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Free space output power (mW) | Transverse mode | Longitudinal mode | Current adjustment range | Fiber length(m) | Pointing stability (urad) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1550-SLM | 1550 nm | 1-10000 mW | <10 kHz, <5 kHz | <2%, <1%, <0.5% | <0.05% optional | < 1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-852-SLM | 852 nm | 1-1000 mW | <50 kHz | <2%, <1% | <0.1%, <0.3% | < 1.1 | 1-500 / 1-1000 | TEM00 | SLM | 1-100% | 1.5-2 | <15 / <50 | >15 Horizontal (Vertical optional) | <30 | Air cooled / Water cooled | 15-30 | 110/220V | >10000 | SFG Module (Free space) | Datasheet |
532 NM Marking Laser Series |
1 model| Model | Wavelength | Output / average power | Pulse energy | Power stability | Rep. | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-532 | 532 nm | 1.5 W/ 3 W/ 4.5 W | ~75/ 150 uJ/ 220 | <3%, <2%, <1% | ~20kHz | TEM00 | <1.5 | <10 | 10-35 | PSU-FL-FDA(12V/25A) / PSU-FL-OEM (12V/25A) | >10000 | Datasheet |
Picosecond Diode Laser |
7 models| Model | Wavelength | Output / average power | Repetition rate | Power stability | M² | Single pulse energy (nJ) | Warm-up time (minutes) | Transverse mode | Beam divergence, full angle (mrad) | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Pulse duration (ps) | Single pulse energy (mJ) | pulse | Pulse duration | Cooling method | Operating voltage (VDC) | M2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-H-1064-PS | 1064 nm | 1-20 W | 20-120 MHz (Fixed) | <2%, <1% | <1.2 | 1-500 | <10 | TEM00 | <1 | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | Datasheet |
| FL-H-532-PS | 532 nm | 1-5000 mW | 20-120 MHz (Fixed) | <2%, <1% | <1.2 | – | <10 | TEM00 | – | >100:1 Horizontal | Air cooled | 15-35 | 12V/6.67A | >10000 | <8ps; or one fixed value between 10 ps-150 ps | – | – | – | – | – | – | Datasheet |
| MIL-PS-2910-4235 | 2910 nm | 1-2000 mW | 15 MHz | <3%, <2%, <1% | – | – | <10 | – | – | – | Waterr cooled | 15-30 | RAD1PS | >10000 | – | – | – | – | – | – | – | Datasheet |
| PS-A-1064 | 1064 nm | 1 W/ 2.5 W | 1 kHz | <5%, <3% | <1.2 | – | – | – | <1.5 | – | Water cooled | 15-35 | RAD1PS | >10000 | – | 0.1-1 / 1-2.5 | duration, / high | – | – | – | – | Datasheet |
| PS-A-532 | 532 nm | 1 W | 1 kHz | <5%, <3% | <1.2 | – | – | – | <1.5 | – | Water cooled | 15-35 | RAD1PS | >10000 | – | 0.1-1 | duration, / high | – | – | – | – | Datasheet |
| PS-D-1064 | 1064 nm | 1-100 W | 400 kHz~120 MHz | <2%, <1% | <1.2 | – | ≥30 | TEM00 | <3 | >100:1 Horizontal (Vertical optional) | – | 20-30 | – | >10000 | – | – | – | ~10 | Water cooled | 36V/40A | – | Datasheet |
| PS-D-532-Water | 532 nm | 1-2000 mW | 80 MHz±1 | <3%, <2%, <1% | – | – | ≥30 | TEM00 | <2 | >100:1 Horizontal (Vertical optional) | – | 20-30 | – | – | ~10 | – | – | – | Water cooled | 36V/40A | <1.2 | Datasheet |
4.1 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| HPL-MIR-4100 | 4100 nm | 1~2 W |
4.3 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| HPL-MIR-4300 | 4300 nm | 1~2 W |
High Power Laser Diode Module |
93 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature（10 s max） | Fiber Cladding Diameter | Fiber Buffer Diameter | Main power supply port | Operating Voltage（Simplex） | Fiber Armor | Lead Soldering Temperature (10 s max) | Weight | Lead Soldering Temperature, 10 s max | Soldering | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-1064-100-2 | 1064 nm | 100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-10-2 | 1064 nm | 10 W | - / 1.7 / - / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-30-2 | 1064 nm | 30 W | - / 5 / - / V | 200 / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-976-808-2 | 1064 nm | 10/ 10 W/ 10 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-980-915-808-640-450-4 | 1064 nm | 15/ 15 W/ 15/ 15/ 0. 5/ 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-10-2 | 1470 nm | 10 W | 5.3 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | 220 | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-15-2 | 1470 nm | 15 W | 9.5 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | 220 | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-30-2 | 1470 nm | 30 W | - / 21.0 / 22.0 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 10 / 40 | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 / ℃ | 220 | 500 | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-50-2 | 1470 nm | 50 W | - / 20.2 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | – | -20 / 80 / ℃ | - / 90 / % | - / 250 | 220 | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-5-2 | 1470 nm | 5 W | - / 3.26 / - / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-2 | 1470 nm | 30/ 30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-635-2 | 1470 nm | 15/ 15 W/ 0.2 | – | m | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-640-2 | 1470 nm | 15/ 18 W/ 0.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1550-10-2 | 1550 nm | 10 W | - / 8.6 / - / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1550-15-2 | 1550 nm | 15 W | 12 / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1940-15-2 | 1940 nm | 15 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-100-6 | 405 nm | 100 W | – | 600 / μm | 2 / m | SMA905-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-10-2 | 405 nm | 10 W | - / 17.2 / - / V | - / 200 / - / μm | - / 1-5 / - / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-150-8 | 405 nm | 150 W | – | 800 / μm | 2 / m | Fixed-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-16-2 | 405 nm | 16 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-20-4 | 405 nm | 20 W | – | 400 / μm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-24-4 | 405 nm | 24 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-30-4 | 405 nm | 30 W | – | 400 / μm | – | SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-50-6 | 405 nm | 50 W | – | 600 / μm | 2 / m | SMA905-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-60-6 | 405 nm | 60 W | – | 600 / μm | 2 / m | SMA905-SMA905 / - | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-405-8-2 | 405 nm | 8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-100-1 | 450 nm | 100 W | – | 105 / μm | - / 2.5 / - / m | - / SMA905/ D80/ QBH / - / - | 15 / 35 | - / 75 / % | – | -20 / 50 | – | – | – | – | Monitor port / Indication light | - / 33 / - / V | - / Optional / - / - | - / 250 / ℃ | 3.8 / kg | – | – | Datasheet |
| LDM-450-10-1 | 450 nm | 10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-15-1 | 450 nm | 15 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-200-2 | 450 nm | 200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-30-1 | 450 nm | 30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-3-1 | 450 nm | 3 W | 4.8 / V | 105 / μm | - / 1-5 / - / m | – | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-450-40-1 | 450 nm | 40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-450-50-0.5 | 450 nm | 50 W | – | 50 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | – | -20 / 50 | – | – | – | – | – | - / 36 / - / V | - / Optional / - / - | - / 250 | – | – | – | Datasheet |
| LDM-520-10-1 | 520 nm | 10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-20-2 | 520 nm | 20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-40-2 | 520 nm | 40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-4-1 | 520 nm | 4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-70-4 | 520 nm | 70 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-520-7-1 | 520 nm | 7 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-10-2 | 638 nm | 10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-20-2 | 638 nm | 20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-2.5-1 | 638 nm | 2.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-30-4 | 638 nm | 30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-40-4 | 638 nm | 40 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-5-1 | 638 nm | 5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-638-7-1 | 638 nm | 7 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-10-2 | 660 nm | 10 W | - / 16.5 / - / V | - / 200 / - / μm | 1-5 / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-660-15-2 | 660 nm | 15 W | - / 18.6 / - / V | - / 200 / - / μm | 1-5 / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-660-3-2 | 660 nm | 3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-6-2 | 660 nm | 6 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-8-2 | 660 nm | 8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-793-10-1 | 793 nm | 10 W | - / 3.8 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-793-20-1 | 793 nm | 20 W | - / 7.6 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-793-30-1 | 793 nm | 30 W | - / 11.3 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-793-50-1 | 793 nm | 50 W | 22.7 / V | - / 105 / - / μm | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | – | -20 / 80 / ℃ | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | - / 250 | – | Datasheet |
| LDM-793-5-1 | 793 nm | 5 W | - / 1.9 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-793-90-1 | 793 nm | 90 W | - / 34 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | – | -20 / 80 | - / 90 / % | – | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | - / 250 / ℃ | – | Datasheet |
| LDM-808-100-4 | 808 nm | 100 W | - / 15 / - / V | - / 400 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 440 | - / 700 | – | – | – | – | – | – | – | Datasheet |
| LDM-808-14-4 | 808 nm | 14 W | - / 3.6 / - / V | - / 400 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | 440 | - / 700 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-200-4 | 808 nm | 200 W | - / 28.8 / - / V | - / 400 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 440 / - / μm | - / 700 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-808-20-4 | 808 nm | 20 W | - / 5.58 / - / V | - / 400 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | 440 | - / 700 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-300-2 | 808 nm | 300 W | – | – | – | – | – | – | thermal conduction | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-808-30-4 | 808 nm | 30 W | - / 7.1 / - / V | - / 400 / - / μm | – | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 440 / - / μm | - / 700 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-4.5-1 | 808 nm | 4.5 W | - / 1.8 / - / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 / ℃ | 125 | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-808-500-8 | 808 nm | 500 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-808-50-4 | 808 nm | 50 W | - / 11.1 / - / V | - / 400 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 440 / - / - | - / 700 | – | – | – | – | – | – | – | Datasheet |
| LDM-878.6VBG-100-2 | 878 nm | 100 W | - / 15.8 / 18.0 / V | - / 200/400 / - / μm | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-878.6VBG-120-2 | 878 nm | 120 W | - / 21.1 / 24.0 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 220 | - / 500 / - / μm | – | – | – | – | – | – | Temperature(10 / s | Datasheet |
| LDM-878.6VBG-180-4 | 878 nm | 180 W | - / 28.5 / - / V | - / 400 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 440 / - / μm | - / 700 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-878.6VBG-30-2 | 878 nm | 30 W | - / 5.3 / 6.0 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | 500 | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-878.6VBG-40-2 | 878 nm | 40 W | – | - / 200 / - / μm | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | 500 | – | – | – | - / 250 | – | – | – | Datasheet |
| LDM-878.6VBG-70-2 | 878 nm | 70 W | - / 12.3 / 14.0 / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 220 | 500 | – | – | – | – | – | – | Temperature / (10 / s | Datasheet |
| LDM-915-100-2 | 915 nm | 100 W | 12.25 / V | – | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-150-4 | 915 nm | 150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-200-4 | 915 nm | 200 W | - / 22.4 / 25.0 / V | - / 400 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 440 / - / μm | - / 700 / - / μm | – | – | – | - / 250 / ℃ | – | – | – | Datasheet |
| LDM-915-300-2 | 915 nm | 300 W | - / 29.7 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 220 / - / μm | 500 | – | – | – | – | – | – | – | Datasheet |
| LDM-915-30-2 | 915 nm | 30 W | 3.4 / V | - / 200 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-50-2 | 915 nm | 50 W | - / 8.7 / - / V | - / 200 / - / μm | - / 1-5 / - / m | – | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-940-100-2 | 940 nm | 100 W | - / 15.4 / - / V | - / 200 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-940-170-1 | 940 nm | 170 W | 32 / V | 105 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | - / 125 / - / - | 250 / - | – | – | – | – | – | – | – | Datasheet |
| LDM-940-200-2 | 940 nm | 200 W | 31 / V | 200 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 220 / - / μm | - / 500 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-940-80-1 | 940 nm | 80 W | - / 14.4 / - / V | - / 105 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-100-1 | 976 nm | 100 W | - / 24.2 / 24.8 / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 125 | 250 | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-140-1 | 976 nm | 140 W | - / 28.9 / 29.5 / V | - / 105 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | – | 125 | 250 | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-30-1 | 976 nm | 30 W | 7.2 / V | 105 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-60-1 | 976 nm | 60 W | - / 12 / V | - / 105 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-976VBG-9-1 | 976 nm | 9 W | 1.62 / V | 105 / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | - / 125 / - / μm | - / 250 / - / μm | – | – | – | – | – | – | – | Datasheet |
| LDM-980-100-2 | 980 nm | 100 W | 13.6 / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-980-200-4 | 980 nm | 200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-980-300-2 | 980 nm | 300 W | - / 28.5. / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | 500 | – | – | – | – | – | – | – | Datasheet |
| LDM-980-30-2 | 980 nm | 30 W | - / 5.1 / - / V | – | - / 1-5 / - / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-980-50-2 | 980 nm | 50 W | - / 8.5 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | – | – | – | – | – | – | – | – | – | Datasheet |
420nm Violet Blue Laser, Diode Laser, Violet Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-H-420 | 420 nm | 500~1300 mW |
660 NM RED Diode Laser.
5 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-HD-660 | 660 nm | 1.5~3 W | |
| MDL-III-660D | 660 nm | 1~1000 mW | |
| MDL-MD-660 | 660 nm | 1~1500 mW | |
| MDL-XD-660 | 660 nm | 3~4.5 W | |
| MLL-III-660D | 660 nm | 1~1000 mW |
552 NM Green Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-552(FC) | 552 nm | 1~1800 mW |
561 NM Yellow Green Laser.
3 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-561(FC) | 561 nm | 1~1800 mW | |
| MGL-FN-561 | 561 nm | 300~1000 mW | |
| MGL-W-561A | 561 nm | 1~2 W |
588nm Yellow Laser, Yellow Orange Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-588(FC) | 588 nm | 1~4100 mW |
High Stability 532nm Laser |
13 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Pointing Stability Over Temperature (urad/°C) | Operating temperature (°C) | Power supply | Expected lifetime (hours) | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Spectral linewidth (nm) | M2 | Polarization ratio | Power supply (100-240VAC) | Modulation optional | Power supply (12VDC) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | Modulation option | Polarization (optional) | Fiber type | Fiber connector | Fiber length | Fiber Jacket | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-D-532 | 532 nm | 20~35 W | <1% | 10 | Near TEM00 | <1.5 | ~4.0 | Air Cooled | <20 | 10-35 | PSU-DEP-W | ＞10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-D-532-C | 532 nm | 45~75 W | <1% | <1.2 | TEM00 | <1.5 | – | Water cooled | – | – | – | >10000 | <10 | 10-35 | 36V/13.9A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-532 | 532 nm | 1.5~2.5 W | <1% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | <0.1 / <0.003 | <1.2,(<1.1 optional) | >100:1, Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532 | 532 nm | 1500~4000 mW | <1% | <1.2 | TEM00 | <1.5 | – | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532-AOM | 532 nm | 150~2000 mW | <1% | – | – | – | <1.5 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA-AOM/PSU-H-LED-AOM | DC-1MHz;TTL or Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | Datasheet |
| MGL-K-532 | 532 nm | 1~30 W | <0.3% | <1 | TEM00 | ~1.0 | – | Air Cooled / Water Cooled / Conduction | <20 | 10-35 / 25 | – | >10000 | – | – | – | <0. 1 | <1. 1 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532 | 532 nm | 2.5~5 W | <1% | 3 | Near TEM00 | <1.5 | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | 3-5 | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532-AOM | 532 nm | 1~4 W | <1% | – | Near TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-W -LED | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-U-532 | 532 nm | 300~1500 mW | <0.5% | <1.2 | TEM00 | – | <1.0 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-SR-OEM (12V/25A) | <1.5 | <8 | – | – | – | – | – | – | Datasheet |
| MGL-V-532 | 532 nm | 1~10 W | <0.5% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-LED | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MGL-V-532-SM | 532 nm | 700~5000 mW | <1% | – | TEM00 (single mode fiber output) | – | – | Air Cooled (Water Cooled optional) | – | 10-30 | – | ＞10000 | <10 | – | – | – | <1.1 | – | PSU-W-LED | – | – | – | – | – | >50:1 after PM fiber | SM fiber (PM fiber optional) | FC/APC | 1m | PVC, Metal optional | Datasheet |
| MGL-W-532A | 532 nm | 10~20 W | <1% | – | Near TEM00 | <2.0 | – | – | – | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-FDA/PSU-W-LED | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-Z-532 | 532 nm | 30~60 W | <1% | – | Near TEM00 | <2.0 | ~5 | Air Cooled | – | 10-35 | – | >10000 | <10 | – | – | – | – | >1:1, Horizontal(Vertical optional) | PSU-SEP-W | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
522nm Green Laser
3 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-DP-522-A | 522 nm | 800~1500 mW | |
| MGL-DP-522-B | 522 nm | 1.5~3 W | |
| MGL-DP-522-C | 522 nm | 3~7 W |
THE Manufacturer High Stability 1064nm Laser
9 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Modulation optional | Beam divergence, full angle (mrad) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (℃) | Power supply (VDC) | (including polarization-maintaining, | M2 | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Power supply (36VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-D-1064 | 1064 nm | 10~30 W | <1% | <1.3 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Air cooled | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-H-1064 | 1064 nm | 1.5~3 W | <1% | <1.5 | TEM00 | <5 | – | >100:1, Horizontal (Vertical optional) | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | ~1.2 | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-N-1064 | 1064 nm | 4~5 W | <1% | <3.0 | Near TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-S-1064 | 1064 nm | 1~1500 mW | <0.5% | <1.2 | TEM00 | – | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-A-D/PSU-A-F | >10000 | – | <1.7 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | <8 | 7g laterally,15g vertically | 10-35 | PSU-A-F-OEM (5V/5A) | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-S-1064-SM | 1064 nm | 1~1500 mW | <1% | – | TEM00 (single mode fiber output) | <10 | – | – | – | 10-35 | PSU-III-FDA/PSU-III-LED / PSU-SR | >10000 | – | – | – | – | – | – | – | PSU-A-F-OEM (5V/5A) / PSU-SR-OEM (12V/25A) | or PM, fiber) coupling, delivering high power | <1.2 | 0.10~0.12 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | Datasheet |
| MIL-T-1064 | 1064 nm | 1~10 W | <1% | <1.2 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Air cooled | 10-35 | PSU-W-FDA/PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-T-1064-SM | 1064 nm | 1~5 W | <1% | – | TEM00 (single mode fiber output) | <10 | – | (optional) / >50:1 after PM fiber | Air Cooled | – | PSU-W-LED/ PSU-W-FDA | ＞10000 | – | – | – | – | – | – | 10-30 | – | – | <1.1 | 0.10-0.12 | SM fiber (PM fiber optional) | FCAPC | PVC | 1m (Other lengths can be customized) | – | – | Datasheet |
| MIL-U-1064-SU | 1064 nm | 3~4 W | <1% | <1.5 | TEM00 | <5 | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | ~1.0 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-Z-1064 | 1064 nm | 30~60 W | <1% | <1.3 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DRIVER (36V/13.8A) | Datasheet |
THE Manufacturer Miniature OEM Laser Module AT 1064nm
8 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MIL-S-1064-OEM | 1064 nm | 1~1500 mW | |
| PGL-FP-1064 | 1064 nm | 1~10 mW | |
| PGL-FS-1064 | 1064 nm | 1~500 mW | |
| PGL-H1-1064 | 1064 nm | 1~800 mW | |
| PGL-LF-1064 | 1064 nm | 1~10 mW | |
| PGL-V-H-1064 | 1064 nm | 1~800 mW | |
| PGL-V-H-FC-1064 | 1064 nm | 1~1000 mW | |
| S-1064-OEM | 1064 nm | 1~1500 mW |
355nm UV Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| Mini-E-PA-355/40uJ | 355 nm | 1000 mW |
THE Manufacturer LOW Noise 532nm Laser
7 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | printing, | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization (optional) | Fiber type | Fiber core diameter | Fiber connector | Fiber length | Fiber Jacket | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | M2 | Cooled method | Polarization ratio (optional) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1% | <1% | <1.1 | TEM00 | <1.2 | <10 | <20 | >100:1, Horizontal(Vertical optional) | chip | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-532-SM | 532 nm | 200~1000 mW | <0.1 nm | <3%, <2%, <1% | <1% | <1.2 | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-30 | PSU-H-FDA/ PSU-H-LED | ＞10000 | >50:1 after PM fiber | SM fiber (PM fiber optional) | 3.5um,0.10NA | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | Datasheet |
| MLL-FN-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1%, <0.5% | <0.5% | – | TEM00 | <1.5 | <5 | – | – | – | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MLL-K-532 | 532 nm | 1~30 W | <0.1 nm | <1%, <0.5%, <0.3%, <2% | <0.1%, <0.3% | <1 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 / 25 | – | >10000 | – | – | – | – | – | – | – | – | <1. 1 | Water Cooled / Conduction | – | – | Datasheet |
| MLL-K-532-SM | 532 nm | 1000~8000 mW | <0.1 nm | <2%, <1%, <0.5% | <0.2% | – | TEM00 (single mode fiber output) | – | <10 | – | (optional) / >50:1 after PM fiber | – | 10-30 | PSU-W-LED | ＞10000 | – | SM fiber (PM fiber optional) | 10um,0.10NA | FC/APC | 1m | Metal | – | – | <1.1 | Water Cooled | – | – | Datasheet |
| MLL-V-532 | 532 nm | 1~15 W | <0.1 nm | <2%, <1%, <0.5% | <0.5% | <1.3 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | Water Cooled | – | – | Datasheet |
| MLL-V-532-SM | 532 nm | 1000~5000 mW | <0.1 nm | <3%, <2%, <1% | <1% | – | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-30 | PSU-W-LED | ＞10000 | – | SM fiber (PM fiber optional) | 3.5um,0.10NA | FC/APC | 1m | PVC, Metal optional | – | – | <1.1 | Air Cooled (Water Cooled optional) | >50:1 after PM fiber | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
THE Manufacturer LOW Noise 1064nm Laser
5 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Cooled method | M2 | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (℃) | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1064 | 1064 nm | 1500~3000 mW | <0.1 nm | <3%, <2%, <1% | <1% | <1.5 | TEM00 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-1064-OEM | 1064 nm | 20~40 W | <0.1 nm | <2%, <1%, <0.5% | <0.5% | – | TEM00 | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | <10 | 25 | – | – | >10000 | ~1 | <20 | Conduction | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-S-1064 | 1064 nm | 1~1500 mW | <0.1 nm | <2%, <1%, <0.5%, <3% | <1% | – | TEM00 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | – | – | – | >10000 | – | – | – | <1.2 | <1.0 | <8 | 7g laterally, 15g vertically | 10-35 | – | – | – | – | – | Datasheet |
| MLL-T-1064 | 1064 nm | 1~10 W | <0.02 nm | <2%, <1%, <0.5% | <1% | <1.2 | TEM00 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | PSU-W-FDA/PSU-W-LED | – | >10000 | – | <20 | Air cooled | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-T-1064-SM | 1064 nm | 1~7000 mW | <0.02 nm | <2%, <1% | <1% | <1.1 | TEM00 (single mode fiber output) | – | (optional) / >50:1 after PM fiber | <10 | – | PSU-W-LED/ PSU-W-FDA | – | ＞10000 | – | – | Air Cooled | – | – | – | – | 10-30 | 0.10-0.12 | SM fiber (PM fiber optional) | FCAPC | PVC | 1m (Other lengths can be customized) | Datasheet |
Ultra Compact, Narrow Linewidth U Serirs DPSS Lasers |
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Optical noise | Transverse mode | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1064-SU | 1064 nm | 1~3000 mW | <0.1 nm | <1% | TEM00 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | Datasheet |
| MLL-U-532 | 532 nm | 1~1500 mW | <0.003 nm (<0.1) | <1%, (<0.5% @300-500 mW, optional) | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <1.0 | <1.5 | <8 | Datasheet |
660 NM RED Laser.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MRL-660(FC) | 660 nm | 1~1800 mW | |
| MRL-W-660A | 660 nm | 500~2000 mW |
670 NM RED Laser.
3 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MRL-DP-670-A | 670 nm | 500~2000 mW | |
| MRL-DP-670-B | 670 nm | 2~4 W | |
| MRL-DP-670-C | 670 nm | 4~6.5 W |
607 NM Orange Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MRL-U-607-SF | 607 nm | 800~1800 mW |
Tunable Laser |
4 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Rep. rate | Single pulse energy (µJ) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (220VAC) | Expected lifetime (hours) | Power supply (100-240VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TUN-Ti-740~840 | 740 nm | 1~7000 mW | <2 nm | <5%, <3% | 1-10 | 1-700 | <2 | <10 | Water Cooled | 15-35 | PSU-AOM(4U) | >10000 | – | Datasheet |
| TUN-Ti-CW-760~840 | 760 nm | 1~3000 mW | <2 nm | <3%, <2% | – | – | <4 | <10 | Water Cooled | 15-35 | – | >10000 | RAD1PS | Datasheet |
| TUN-TiN-CW-760~840 | 760 nm | 1~2000 mW | <2 pm | <3%, <2% | – | – | <4 | <10 | Water Cooled | 15-35 | – | >10000 | RAD1PS | Datasheet |
| TUN-W-1480~1660 | 1480 nm | 1~2000 mW | <2 nm | <5%, <3% | – | – | <10 | – | Air Cooled | 15-35 | – | >10000 | RAD1PS | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.