Sapphire marking
FS-G-1030B: Sapphire marking depends on how optical energy is delivered to the target; 1030 nm emission governs absorption, while the listed temporal parameter (<800) governs peak intensity and heat deposition.
Pulse energy, repetition rate, pulse width
FS-G-1030B1030 nm near-infrared high-power pulsed laser
1030 nmFS-G-1030B is a 1030 nm Pulsed laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. <800fs @200KHz. Key specifications: operating mode Pulsed, output / average power 10~40 W, rep. rate (khz) 50-1000. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FS-G-1030B
22 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 10~40 W |
| Beam / notes | <800 fs @200 kHz |
| Rep. rate (kHz) | 50-1000 |
| Pulse duration | <800 |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 factor | <1.3 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±5 |
| Average power (W) | 10-40 (40W@200kHz) |
| Single pulse energy ( μJ) | 100-600 (600μJ@50kHz) |
| Peak power (MW) | 125-750 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| M² | <1.3 |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <3 |
| Beam height from base plate (mm) | 110 |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Ceramic cutting
FS-G-1030B: 1030 nm emission determines compatible optics, coatings and detectors for Ceramic cutting. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
Semiconductor cutting
FS-G-1030B: 1030 nm emission determines compatible optics, coatings and detectors for Semiconductor cutting. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
Film scribing
FS-G-1030B: 1030 nm emission determines compatible optics, coatings and detectors for Film scribing. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
System integration
Integration and compatibility
Use these checks to connect FS-G-1030B to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Cooled method: Water cooled · Operating temperature (℃): 15-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: TEM00 · M2 factor: <1.3
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for FS-G-1030B
What cooling does the FS-G-1030B require?
Cooled method: Water cooled · Operating temperature (℃): 15-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the FS-G-1030B deliver?
Transverse mode: TEM00 · M2 factor: <1.3. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FS-G-1030B with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | FS-G-1030B (current) | FS-H- 1030A | FS-H- 1030B |
|---|---|---|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm |
| Optical power / pulse energy | 10~40 W | 1-500 mW | 500-3000 mW |
| Operating mode / pulse width | Pulsed | Pulsed | Pulsed |
| Beam quality | TEM00 | TEM00 | TEM00 |
Related pulsed lasers
Compare the FS-G-1030B with nearby pulsed lasers across the wavelength range.
