Back to Home
Precisometer

Pulse energy, repetition rate, pulse width

HPL-405-T405 nm violet high-power pulsed laser

405 nm

HPL-405-T is a 405 nm Pulsed laser. Used for marking, carving, measure, scientific research. Key specifications: output / average power 200 uJ/ 2 W, repetition rate 1~10 kHz, pulse width <15 ns. View specifications, datasheet and enquiry options from Precisometer.

Datasheet (PDF)Back to Pulsed LasersBrowse all laser models

Specifications

HPL-405-T

3 specification rows

Wavelength405 nm
Output / average power200 uJ/ 2 W
Repetition rate1~10 kHz
Pulse width<15 ns

Application context

Why this design is used

Applications named on this model’s datasheet, expanded with the model’s optical specifications.

Marking

HPL-405-T: Marking depends on how optical energy is delivered to the target; 405 nm emission governs absorption, while the listed temporal parameter (1~10 kHz) governs peak intensity and heat deposition.

Carving

HPL-405-T: 405 nm emission determines compatible optics, coatings and detectors for Carving. Beam quality, divergence and pointing stability should be checked against the experiment geometry.

Measure

HPL-405-T: Measure benefits from a stable, focusable source. 405 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.

Scientific research

HPL-405-T: 405 nm emission determines compatible optics, coatings and detectors for Scientific research. Beam quality, divergence and pointing stability should be checked against the experiment geometry.

Need this configured?

Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.

Open laser selector

Model selection

Nearby series comparison

Compare HPL-405-T with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.

Selection parameterHPL-405-T (current)MDL-NS-405MDL-PS-405
Wavelength405 nm405 nm405 nm
Optical power / pulse energy200 uJ/ 2 W1~300 mW1~100 mW
Operating mode / pulse width1~10 kHz10 ns~10 ms0.1~80 MHz
Beam qualityConfirm for this modelMultimodeMultimode

Related pulsed lasers

Compare the HPL-405-T with nearby pulsed lasers across the wavelength range.

Choosing a laser

Guides that put this laser in context

Which specifications decide the experiment, and which ones cost money without changing the result.

All guides
Laser emission spectrum, intensity noise traces, and beam quality profiles illustrating the main laser specifications
Photonics
13 min Spec lab

Laser specifications decoded

Linewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.

Open guide
Laser pulse absorbed by a blood vessel producing acoustic waves for photoacoustic detection
Photoacoustic imaging
15 min Source lab

Choosing a laser for photoacoustic imaging

Connect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.

Open guide
Ultrafast laser beams passing through mirrors and lenses on a darkened optical table
Ultrafast spectroscopy
18 min System lab

Building a pump–probe spectroscopy system

Design the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.

Open guide