Pulse energy, repetition rate, pulse width
MDL-PS-410 is a 410 nm Pulsed laser. Used for medical imaging, flow cytometry, dna sequencing. Key specifications: output / average power 1~100 mW, repetition rate 0.1~80 MHz, pulse width 100~1000 ps. View specifications, datasheet and enquiry options from Precisometer.
Specifications
13 specification rows
| Wavelength | 410 nm |
|---|---|
| Output / average power | 1~100 mW |
| Repetition rate | 0.1~80 MHz |
| Pulse width | 100~1000 ps |
| Operating mode | CW |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1%, <0.5% |
| Transverse mode | Near TEM00 |
| M2 | <1.5 / <1.2 |
| Beam divergence, full angle (mrad) | ~0.5 |
| Warm-up time (minutes) | <5 |
| Cooled method | Conduction |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM |
| Expected lifetime (hours) | >10000 |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
MDL-PS-410: 410 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
MDL-PS-410: 410 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
MDL-PS-410: 410 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
System integration
Use these checks to connect MDL-PS-410 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Conduction · Operating temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: Near TEM00 · M2: <1.5 / <1.2. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MDL-PS-410 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MDL-PS-410 (current) | MDL-NS-410 | MDL-NS-405 |
|---|---|---|---|
| Wavelength | 410 nm | 410 nm | 405 nm |
| Optical power / pulse energy | 1~100 mW | 1~300 mW | 1~300 mW |
| Operating mode / pulse width | 0.1~80 MHz | 10 ns~10 ms | 10 ns~10 ms |
| Beam quality | Near TEM00 | Near TEM00 | Multimode |
Compare the MDL-PS-410 with nearby pulsed lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Photoacoustic imagingConnect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.
Open guide
Ultrafast spectroscopyDesign the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.
Open guide