SLM, narrow linewidth, coherence
MSL-Ti-800 is a 800 nm Single-Frequency laser. Used for dna sequencing, cell sorting, optical instrument, spectrum analysis. Water cooled. Key specifications: output / average power 1~200 mW, operating mode CW, line width (nm) <0.00001. View specifications, datasheet and enquiry options from Precisometer.
Specifications
9 specification rows
| Wavelength | 800 nm |
|---|---|
| Output / average power | 1~200 mW |
| Beam / notes | Water cooled |
| Operating mode | CW |
| Line width (nm) | <0.00001 |
| Power stability (rms, 4 hours±3℃) | <3%, <2% |
| Beam divergence, full angle (mrad) | <1 |
| Warm-up time (minutes) | <10 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Expected lifetime (hours) | >10000 |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
MSL-Ti-800: 800 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<3%, <2%) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-Ti-800: 800 nm emission determines compatible optics, coatings and detectors for Cell sorting. The catalogued beam parameter (<1) helps predict how the source will focus and propagate through the instrument.
MSL-Ti-800: 800 nm emission determines compatible optics, coatings and detectors for Optical instrument. The catalogued beam parameter (<1) helps predict how the source will focus and propagate through the instrument.
MSL-Ti-800: 800 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (<1) also controls focusing and collection geometry.
System integration
Use these checks to connect MSL-Ti-800 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Beam / notes: Water cooled. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Beam divergence, full angle (mrad): <1. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MSL-Ti-800 with the closest available models in the Single-Frequency Lasers family. Confirm option-dependent values on the final configuration before ordering.
Compare the MSL-Ti-800 with nearby single-frequency lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide