Scientific research
FL-1080-CW: 1080 nm emission determines compatible optics, coatings and detectors for Scientific research. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Fiber output, PM options, seed formats
FL-1080-CW1080 nm near-infrared high-power fiber laser
1080 nmFL-1080-CW is a 1080 nm Fiber laser. Used for scientific research, laser radar, life science, microelectronics. Fiber Laser. Key specifications: output / average power 1~500 W. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1080-CW
2 specification rows
| Wavelength | 1080 nm |
|---|---|
| Output / average power | 1~500 W |
| Beam / notes | Fiber Laser |
Series-level technical context
Engineering context for a thin Fiber Lasers record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 7 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 1-10 W
- • Output / average power: 1~400 mW
- • Output / average power: 1~10 W
- • Operating mode: CW
- • Power stability (rms, 4 hours , ±3℃): <2%, <1%, <0.5%
Beam-quality tolerance context
Nearby series records state M²: <1.1 and Beam divergence, full angle (mrad): <1.5. These are series context, not guaranteed values for FL-1080-CW; confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Laser source and internal thermal control
- Step 2Configured fiber launch or integrated pigtail
- Step 3Mode- and connector-matched patch lead
- Step 4Collimator, isolator or experiment input
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laser radar
FL-1080-CW: 1080 nm emission determines compatible optics, coatings and detectors for Laser radar. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Life science
FL-1080-CW: 1080 nm emission determines compatible optics, coatings and detectors for Life science. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Microelectronics
FL-1080-CW: 1080 nm emission determines compatible optics, coatings and detectors for Microelectronics. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-1080-CW with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | FL-1080-CW (current) | FL-1080-SLM | TEM-LN-1080 |
|---|---|---|---|
| Wavelength | 1080 nm | 1080 nm | 1080 nm |
| Optical power / pulse energy | 1~500 W | 1-10 W | 1~400 mW |
| Operating mode / pulse width | Confirm for this model | CW | CW |
| Beam quality | Confirm for this model | TEM00 | TEM00 |
Related fiber lasers
Compare the FL-1080-CW with nearby fiber lasers across the wavelength range.
