SLM, narrow linewidth, coherence
MSL-Ti-CW-785785 nm near-infrared single-frequency laser
785 nmThe MSL-Ti-CW-785 is a 785 nm continuous-wave solid-state laser. Light is amplified in a solid gain medium inside an optical resonator. The resonator feeds light back through that medium to build the laser beam. The pump arrangement and cooling determine how energy is supplied and waste heat is removed. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The quoted power range represents factory-set configurations; specify the required output rating when ordering.
Specifications
MSL-Ti-CW-785
16 specification rows
| Output / average power | 1~1200 mW |
|---|---|
| Beam / notes | Linewidth <500 fm |
| Operating mode | CW |
| Power stability (rms, 4 hours±3℃) | <3%, <2% |
| Line width (fm) | <500 |
| Beam divergence, full angle (mrad) | <4 |
| Warm-up time (minutes) | <10 |
| Cooled method | Water Cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Spectral linewidth | <500 fm nm |
| Wavelength (nm) | 785±1 |
| Coherent length (m) | >10 |
| Beam diameter at the aperture (1/e2,mm) | <3 |
| Beam height from base plate (mm) | 82 |
What do you need?
Tell us the output power, linewidth and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MSL-Ti-CW-785 with the closest available models in the Single-Frequency Lasers family.
Related single-frequency lasers
Compare the MSL-Ti-CW-785 with nearby single-frequency lasers across the wavelength range.
