Back to Home

Fiber output, PM options, seed formats

FL-1908-SLM1908 nm infrared single-frequency low-noise fiber laser

1908 nm

The FL-1908-SLM is a 1908 nm continuous-wave fiber laser. A seed laser establishes the optical signal, and a fiber amplifier increases its power while guiding the light in active fiber. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.

Specifications

FL-1908-SLM

26 specification rows

Output / average power1~5 W
Beam / notesLaser
Operating modeCW
Power stability (rms, 4 hours, ±3℃)<2%, <1%, <0.5%
Transverse modeTEM00
Longitudinal modeSLM
Current adjustment range1-100%
Spectral linewidth (kHz)<50
Relative intensity noise (rms, 10Hz-3MHz)<0.3%, <0.1%, (<0.05% optional)
M2<1.1
Fiber connectorFC/APC, Collimator optional
Fiber length(m)1
Fiber jacketPVC, Metal optional
Pointing stability (urad)<5 / <10
Polarization ratio (dB)>15, after PM fiber
Warm-up time (minutes)<30
Cooled methodAir cooled or Water cooled
Operating temperature (℃)15-30
Power supply (VAC)110/220VAC
Expected lifetime (hours)>10000
Wavelength (nm)1908±1
Frequency shift (MHz)(over ±2℃and 8hours )<±200
M²<1.1
Beam diameter (mm)4±1@Collimator output
Dimensions of Laser483×452 ×133mm3@Air cooled 483×461 ×120 mm3@Water cooled
Weight of Laser10kg@Air cooled, 11kg@Water cooled

What do you need?

Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare FL-1908-SLM with the closest available models in the Fiber Lasers family.

Selection parameterFL-1908-SLM (current)FL-1908-LN-L1908
Wavelength1908 nm1908 nm1908 nm
Optical power / pulse energy1~5 W1~5 W1~5000 mW
Operating mode / pulse widthCWCWPulsed
Beam quality<1.1<1.1<1.1