Fiber output, PM options, seed formats
FC-W-447H-II is a 447 nm Fiber laser. Used for medical imaging, flow cytometry, dna sequencing, measurement. 447nm Violet Blue Laser. Key specifications: output / average power 50~200 W, operating mode CW, cooled method Water cooled. View specifications, datasheet and enquiry options from Precisometer.
Specifications
16 specification rows
| Output / average power | 50~200 W |
|---|---|
| Beam / notes | 447 nm Violet Blue Laser |
| Operating mode | CW |
| Cooled method | Water cooled |
| Fiber Core Diameter (um) | 200, 400, 600, 0.22NA |
| Fiber Connector | SMA905, FC, QBH optional |
| Fiber lengths | 1m |
| Fiber Jacket | PVC, Metal optional |
| Power stability (rms, 4 hours±3℃) | <2%, <1%, <0.5% |
| Warm-up time (minutes) | <5 |
| Operating temperature (℃) | 0-30 |
| Operating voltage (VAC) | 100-240 |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 447±5 |
| Output power (W) @ after 400um fiber | 50-200 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
FC-W-447H-II: 447 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
FC-W-447H-II: 447 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
FC-W-447H-II: 447 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<2%, <1%, <0.5%) helps keep measured intensity changes attributable to the sample rather than source drift.
FC-W-447H-II: Measurement benefits from a stable, focusable source. 447 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
System integration
Use these checks to connect FC-W-447H-II to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Core Diameter (um): 200, 400, 600, 0.22NA · Fiber Connector: SMA905, FC, QBH optional. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
Cooled method: Water cooled · Operating temperature (℃): 0-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare FC-W-447H-II with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
Compare the FC-W-447H-II with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide