Fiber output, PM options, seed formats
FL-535-Pico535 nm green fiber laser
535 nmThe FL-535-Pico is a 535 nm picosecond fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample.
Specifications
FL-535-Pico
18 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 1~1000 mW |
| Beam / notes | Fiber laser �� Picosecond Green Fiber Laser FL-535-Pico / 1~1000 mW Fiber laser �� �� |
| Power stability (rms, 4 hours, ±3℃) | <5%, <3%, <2% |
| Pulse duration (ps) | 100-900 |
| M2 | <1.5 / <2 |
| Rep. rate | 100kHz-20MHz / 100kHz-1MHz |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <15 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Operating voltage (VDC) | 12V/11.5A |
| Expected lifetime (hours) | >10000 |
| Fundamental Frequency | Second harmonic |
| HEAD (Driver integrated) | POWER SUP |
| Wavelength (nm) | 535±1 |
| Beam height from base plate (mm) | 30 |
| Delivery cable length (cm) | 60 |
What do you need?
Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-535-Pico with the closest available models in the Fiber Lasers family.
| Selection parameter | FL-535-Pico (current) | FL-532-SLM | FL-532-SLM-H |
|---|---|---|---|
| Wavelength | 535 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1~1000 mW | 1~3000 mW | 3-15 W |
| Operating mode / pulse width | Pulsed | CW | CW |
Related fiber lasers
Compare the FL-535-Pico with nearby fiber lasers across the wavelength range.
