SLM, narrow linewidth, coherence
MSL-R-639639 nm red narrow-linewidth single-frequency laser
639 nmThe MSL-R-639 is a 639 nm continuous-wave solid-state laser. Light is amplified in a solid gain medium inside an optical resonator. The resonator feeds light back through that medium to build the laser beam. The pump arrangement and cooling determine how energy is supplied and waste heat is removed. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.
Specifications
MSL-R-639
21 specification rows
| Output / average power | 650~3000 mW |
|---|---|
| Spectral linewidth | <5 MHz |
| M² | <1.3 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Pointing stability over temperature (μrad/°C) | <8 |
| Warm-up time (minutes) | <15 |
| Cooled method (water cooled) | WCH-580 |
| Operating temperature (°C) | 20-30 |
| Power supply (100-240VAC) | PSU-W-FDA |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 639±1 |
| Power stability (rms, 4 hours ±3°C) | <3%, <2%, <1% |
| Noise of amplitude (rms, 20Hz-20MHz) | <0.5% |
| Beam diameter at the aperture (1/e2, mm) | ~1.5 |
| Beam divergence, full angle (mrad) | <1.5 |
| Polarization ratio | >100:1, Vertical (Horizontal optional) |
| Pointing stability(μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 65 |
| Coherent length (m) | >50 |
What do you need?
Tell us the output power, linewidth and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MSL-R-639 with the closest available models in the Single-Frequency Lasers family.
Related single-frequency lasers
Compare the MSL-R-639 with nearby single-frequency lasers across the wavelength range.
