Back to Home
Precisometer

Pulse energy, repetition rate, pulse width

FS-F-515C515 nm green high-power pulsed laser

515 nm

FS-F-515C is a 515 nm Pulsed laser. Used for pumping, scientific research, industrial, medical applications. <300fs @100kHz-1MHz. Key specifications: operating mode Pulsed, output / average power 8~20 W. View specifications, datasheet and enquiry options from Precisometer.

Datasheet (PDF)Back to Pulsed LasersBrowse all laser models

Specifications

FS-F-515C

3 specification rows

Wavelength515 nm
Operating modePulsed
Output / average power8~20 W
Beam / notes<300 fs @100 kHz-1 MHz

Application context

Why this design is used

Applications named on this model’s datasheet, expanded with the model’s optical specifications.

Pumping

FS-F-515C: 515 nm emission determines compatible optics, coatings and detectors for Pumping. Beam quality, divergence and pointing stability should be checked against the experiment geometry.

Scientific research

FS-F-515C: 515 nm emission determines compatible optics, coatings and detectors for Scientific research. Beam quality, divergence and pointing stability should be checked against the experiment geometry.

Industrial

FS-F-515C: 515 nm emission determines compatible optics, coatings and detectors for Industrial. Beam quality, divergence and pointing stability should be checked against the experiment geometry.

Medical applications

FS-F-515C: 515 nm emission determines compatible optics, coatings and detectors for Medical applications. Beam quality, divergence and pointing stability should be checked against the experiment geometry.

Need this configured?

Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.

Open laser selector

Model selection

Nearby series comparison

Compare FS-F-515C with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.

Selection parameterFS-F-515C (current)FS-H- 515AFS-H- 515B
Wavelength515 nm515 nm515 nm
Optical power / pulse energy8~20 W1-100 mW100-1000 mW
Operating mode / pulse widthPulsedPulsedPulsed
Beam qualityConfirm for this modelTEM00TEM00

Related pulsed lasers

Compare the FS-F-515C with nearby pulsed lasers across the wavelength range.

Choosing a laser

Guides that put this laser in context

Which specifications decide the experiment, and which ones cost money without changing the result.

All guides
Laser emission spectrum, intensity noise traces, and beam quality profiles illustrating the main laser specifications
Photonics
13 min Spec lab

Laser specifications decoded

Linewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.

Open guide
Laser pulse absorbed by a blood vessel producing acoustic waves for photoacoustic detection
Photoacoustic imaging
15 min Source lab

Choosing a laser for photoacoustic imaging

Connect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.

Open guide
Ultrafast laser beams passing through mirrors and lenses on a darkened optical table
Ultrafast spectroscopy
18 min System lab

Building a pump–probe spectroscopy system

Design the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.

Open guide