Fiber output, PM options, seed formats
1027 is a 1027 nm Fiber laser. Used for optical microscope, photon imaging, physics experiment. M²: <1.1. Key specifications: output / average power 1~10 W, spectral linewidth <10 kHz, optical noise <0.05% RIN(DC-3 MHz). View specifications, datasheet and enquiry options from Precisometer.
Specifications
4 specification rows
| Wavelength | 1027 nm |
|---|---|
| Output / average power | 1~10 W |
| Spectral linewidth | <10 kHz |
| Optical noise | <0.05% RIN(DC-3 MHz) |
| M² | <1.1 |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
1027: 1027 nm emission can be matched to the absorption or excitation band used in Optical microscope. The stated stability or noise figure (<0.05% RIN(DC-3 MHz)) helps keep measured intensity changes attributable to the sample rather than source drift.
1027: 1027 nm emission can be matched to the absorption or excitation band used in Photon imaging. The stated stability or noise figure (<0.05% RIN(DC-3 MHz)) helps keep measured intensity changes attributable to the sample rather than source drift.
1027: Physics experiment benefits from a stable, focusable source. 1027 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (<1.1) informs waist size and propagation.
System integration
Use these checks to connect 1027 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
M²: <1.1. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare 1027 with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 1027 (current) | FL-1027-SLM | FL-1027-LN-L |
|---|---|---|---|
| Wavelength | 1027 nm | 1027 nm | 1027 nm |
| Optical power / pulse energy | 1~10 W | 1~10 W | 1~10 W |
| Operating mode / pulse width | Confirm for this model | CW | CW |
| Beam quality | <1.1 | TEM00 | TEM00 |
Compare the 1027 with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide