Back to Home

Deep-sky cooled

ATR533C

ToupTek ATR533C is a cooled deep-sky camera using the IMX533 sensor, with 9 MP (3008 × 3008), 3.76 µm pixels and 40 fps. Designed for deep-sky astrophotography, one-shot colour deep-sky imaging, high-resolution galaxy and lunar imaging. Available from Precisometer for professional astronomy systems.

Sensor
Sony IMX533 color CMOS
Sensor Type
Back-illuminated square color CMOS
Resolution
9 MP (3008 × 3008)
Pixel Size
3.76 µm
Frame Rate
40 fps
Interface
USB 3.0
ATR533C

Application context

Why this design is used

Choose the ATR533C when your telescope and target benefit from 1-inch square, 11.31 × 11.31 mm sensor coverage, 3.76 µm sampling, two-stage TEC, ΔT ≥45 °C and 380–690 nm response.

Deep-sky astrophotography

Two-stage TEC, ΔT ≥45 °C helps control thermal noise during long exposures of galaxies, nebulae and star clusters.

One-shot colour deep-sky imaging

The colour IMX533 sensor captures broadband targets without a separate LRGB filter sequence.

High-resolution galaxy and lunar imaging

3.76 µm pixels balance image scale and detail for appropriately matched telescope focal lengths.

Photometry and time-series imaging

14-bit acquisition, 87 dB dynamic range and regulated cooling support repeatable quantitative observations.

Specifications

ATR533C

31 specification rows

The ATR533C is an astronomy camera in the ATR DSO cooled series, built around a Sony IMX533 color CMOS sensor, 9 MP (3008 × 3008) resolution, 3.76 µm pixels, frame rates up to 40 fps, a USB 3.0 interface. It suits deep-sky cooled where reliable imaging performance and interface compatibility matter.

Sensor & Imaging

ModelATR533C
StatusCurrent
ApplicationDeep-sky cooled
SensorSony IMX533 color CMOS
Sensor TypeBack-illuminated square color CMOS
Sensor Size1-inch square, 11.31 × 11.31 mm
Resolution9 MP (3008 × 3008)
Pixel Size3.76 µm
Shutter TypeRolling shutter

Performance

Frame Rate40 fps
ADC14-bit
Peak QE>80%
Dynamic Range87 dB
Read Noise1.9–0.34 e⁻
Full Well52 ke⁻
Spectral Range380–690 nm

Interface & Thermal

InterfaceUSB 3.0
MountM42 / M54 astronomy adapters
CoolingTwo-stage TEC, ΔT ≥45 °C

Additional Published Specifications

Legacy Model NameATR3CMOS09000KPA
Sensor Diagonal15.97mm
LCG Read Noise1.26 – 1.11 e-
Maximum SNR47dB
Frame Buffer512MB
Sensor Chamber WindowAdjustable heating window
Back Focal Distance17.5mm/12.5mm
Protective WindowIR/AR
Color Filter ArrayRGGB
DDR3 Buffer512MB
Max ExposureUp to 1 hour
Power SupplyDC 12V / 3A

Technical media

Performance graphs and technical drawings

Official sensor-response, performance, and mechanical imagery for the ATR533C.

ATR533C performance analysis HCG mode
ATR533C performance analysis HCG mode
ATR533C performance analysis high full well mode
ATR533C performance analysis high full well mode
ATR533C technical parameters
ATR533C technical parameters

System integration

Integration and compatibility

Use these checks to connect ATR533C to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Lens and microscope interface
Mount: M42 / M54 astronomy adapters
Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.
Sensor and sampling
Sensor: Sony IMX533 color CMOS · Sensor Type: Back-illuminated square color CMOS
Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.
Interface and data rate
Frame Rate: 40 fps · Interface: USB 3.0
Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.
Cooling and noise floor
Dynamic Range: 87 dB · Read Noise: 1.9–0.34 e⁻
Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Technical FAQ

Integration questions for ATR533C

What lens mount is required for the ATR533C?

Mount: M42 / M54 astronomy adapters. Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.

What sensor and pixel pitch does the ATR533C use?

Sensor: Sony IMX533 color CMOS · Sensor Type: Back-illuminated square color CMOS. Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.

How does the ATR533C connect to the acquisition computer?

Frame Rate: 40 fps · Interface: USB 3.0. Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.

What is the noise performance of the ATR533C?

Dynamic Range: 87 dB · Read Noise: 1.9–0.34 e⁻. Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Need help choosing?

Tell us your sensor, resolution, spectral range, frame-rate, interface, and software requirements and we will confirm the matching configuration and lead time.

Open camera finder

Model selection

Nearby series comparison

Compare ATR533C with the closest available models in the ATR DSO cooled family.

Selection parameterATR533C (current)ATR432MATR533M
SensorSony IMX533 color CMOSSony IMX432 monochrome CMOSSony IMX533 monochrome CMOS
Resolution9 MP (3008 × 3008)1.76 MP (1600 × 1100)9 MP (3008 × 3008)
Sensor size1-inch square, 11.31 × 11.31 mm1.1-inch, 14.4 × 9.9 mm1-inch square, 11.31 × 11.31 mm
Pixel size / frame rate3.76 µm9 µm3.76 µm

Other cameras on the IMX533 sensor

The IMX533 appears in 9 models across the catalogue, differing in cooling, shutter, interface and colour filter. Compare them side by side before settling on a variant.