Back to Home

Deep-sky cooled

ATR432C

ToupTek ATR432C is a cooled deep-sky camera using the IMX432 sensor, with 1.76 MP (1600 × 1100), 9 µm pixels and 128 fps. Designed for deep-sky astrophotography, one-shot colour deep-sky imaging, high-resolution galaxy and lunar imaging. Available from Precisometer for professional astronomy systems.

Sensor
Sony IMX432 color CMOS
Sensor Type
Large-pixel global-shutter color CMOS
Resolution
1.76 MP (1600 × 1100)
Pixel Size
9 µm
Frame Rate
128 fps
Interface
USB 3.0
ATR432C

Application context

Why this design is used

Choose the ATR432C when your telescope and target benefit from 1.1-inch, 14.4 × 9.9 mm sensor coverage, 9 µm sampling, two-stage TEC, ΔT ≥44 °C and 380–690 nm response.

Deep-sky astrophotography

Two-stage TEC, ΔT ≥44 °C helps control thermal noise during long exposures of galaxies, nebulae and star clusters.

One-shot colour deep-sky imaging

The colour IMX432 sensor captures broadband targets without a separate LRGB filter sequence.

High-resolution galaxy and lunar imaging

9 µm pixels balance image scale and detail for appropriately matched telescope focal lengths.

Photometry and time-series imaging

12-bit acquisition, 74 dB dynamic range and regulated cooling support repeatable quantitative observations.

Specifications

ATR432C

31 specification rows

The ATR432C is an astronomy camera in the ATR DSO cooled series, built around a Sony IMX432 color CMOS sensor, 1.76 MP (1600 × 1100) resolution, 9 µm pixels, frame rates up to 128 fps, a USB 3.0 interface. It suits deep-sky cooled where reliable imaging performance and interface compatibility matter.

Sensor & Imaging

ModelATR432C
StatusCurrent
ApplicationDeep-sky cooled
SensorSony IMX432 color CMOS
Sensor TypeLarge-pixel global-shutter color CMOS
Sensor Size1.1-inch, 14.4 × 9.9 mm
Resolution1.76 MP (1600 × 1100)
Pixel Size9 µm
Shutter TypeGlobal shutter

Performance

Frame Rate128 fps
ADC12-bit
Peak QE>79%
Dynamic Range74 dB
Read Noise20.2–2.4 e⁻
Full Well100 ke⁻
Spectral Range380–690 nm

Interface & Thermal

InterfaceUSB 3.0
MountM42 / M54 astronomy adapters
CoolingTwo-stage TEC, ΔT ≥44 °C

Additional Published Specifications

Legacy Model NameATR3CMOS01700KPA
Sensor Diagonal17.5mm
LCG Read Noise2.4-20.2e-
Maximum SNR50dB
Frame Buffer512MB
Sensor Chamber WindowAdjustable heating window
Back Focal Distance17.5mm/12.5mm
Protective WindowIR/AR
Color Filter ArrayRGGB
DDR3 Buffer512MB
Max ExposureUp to 1 hour
Power SupplyDC 12V / 3A

Technical media

Performance graphs and technical drawings

Official sensor-response, performance, and mechanical imagery for the ATR432C.

ATR432C HCG performance analysis chart
ATR432C HCG performance analysis chart
ATR432C LCG performance analysis chart
ATR432C LCG performance analysis chart
ATR432C camera parameters
ATR432C camera parameters

System integration

Integration and compatibility

Use these checks to connect ATR432C to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Lens and microscope interface
Mount: M42 / M54 astronomy adapters
Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.
Sensor and sampling
Sensor: Sony IMX432 color CMOS · Sensor Type: Large-pixel global-shutter color CMOS
Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.
Interface and data rate
Frame Rate: 128 fps · Interface: USB 3.0
Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.
Cooling and noise floor
Dynamic Range: 74 dB · Read Noise: 20.2–2.4 e⁻
Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Technical FAQ

Integration questions for ATR432C

What lens mount is required for the ATR432C?

Mount: M42 / M54 astronomy adapters. Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.

What sensor and pixel pitch does the ATR432C use?

Sensor: Sony IMX432 color CMOS · Sensor Type: Large-pixel global-shutter color CMOS. Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.

How does the ATR432C connect to the acquisition computer?

Frame Rate: 128 fps · Interface: USB 3.0. Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.

What is the noise performance of the ATR432C?

Dynamic Range: 74 dB · Read Noise: 20.2–2.4 e⁻. Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Need help choosing?

Tell us your sensor, resolution, spectral range, frame-rate, interface, and software requirements and we will confirm the matching configuration and lead time.

Open camera finder

Model selection

Nearby series comparison

Compare ATR432C with the closest available models in the ATR DSO cooled family.

Selection parameterATR432C (current)ATR428MATR432M
SensorSony IMX432 color CMOSSony IMX428 monochrome CMOSSony IMX432 monochrome CMOS
Resolution1.76 MP (1600 × 1100)7.04 MP (3200 × 2200)1.76 MP (1600 × 1100)
Sensor size1.1-inch, 14.4 × 9.9 mm1-inch, 14.4 × 9.9 mm1.1-inch, 14.4 × 9.9 mm
Pixel size / frame rate9 µm4.5 µm9 µm

Other cameras on the IMX432 sensor

The IMX432 appears in 16 models across the catalogue, differing in cooling, shutter, interface and colour filter. Compare them side by side before settling on a variant.