Back to Home

Deep-sky cooled

ATR428C

ToupTek ATR428C is a cooled deep-sky camera using the IMX428 sensor, with 7.04 MP (3200 × 2200), 4.5 µm pixels and 25.7 fps. Designed for deep-sky astrophotography, one-shot colour deep-sky imaging, high-resolution galaxy and lunar imaging. Available from Precisometer for professional astronomy systems.

Sensor
Sony IMX428 color CMOS
Sensor Type
Global-shutter color CMOS
Resolution
7.04 MP (3200 × 2200)
Pixel Size
4.5 µm
Frame Rate
25.7 fps
Interface
USB 3.0
ATR428C

Application context

Why this design is used

Choose the ATR428C when your telescope and target benefit from 1-inch, 14.4 × 9.9 mm sensor coverage, 4.5 µm sampling, two-stage TEC, ΔT up to 45 °C and 380–690 nm response.

Deep-sky astrophotography

Two-stage TEC, ΔT up to 45 °C helps control thermal noise during long exposures of galaxies, nebulae and star clusters.

One-shot colour deep-sky imaging

The colour IMX428 sensor captures broadband targets without a separate LRGB filter sequence.

High-resolution galaxy and lunar imaging

4.5 µm pixels balance image scale and detail for appropriately matched telescope focal lengths.

Photometry and time-series imaging

12-bit acquisition, 76.4 dB dynamic range and regulated cooling support repeatable quantitative observations.

Specifications

ATR428C

30 specification rows

The ATR428C is an astronomy camera in the ATR DSO cooled series, built around a Sony IMX428 color CMOS sensor, 7.04 MP (3200 × 2200) resolution, 4.5 µm pixels, frame rates up to 25.7 fps, a USB 3.0 interface. It suits deep-sky cooled where reliable imaging performance and interface compatibility matter.

Sensor & Imaging

ModelATR428C
StatusCurrent
ApplicationDeep-sky cooled
SensorSony IMX428 color CMOS
Sensor TypeGlobal-shutter color CMOS
Sensor Size1-inch, 14.4 × 9.9 mm
Resolution7.04 MP (3200 × 2200)
Pixel Size4.5 µm
Shutter TypeGlobal shutter

Performance

Frame Rate25.7 fps
ADC12-bit
Peak QE>79%
Dynamic Range76.4 dB
Read Noise5.41–1.4 e⁻
Full Well25 ke⁻
Spectral Range380–690 nm

Interface & Thermal

InterfaceUSB 3.0
MountM42 / M54 astronomy adapters
CoolingTwo-stage TEC, ΔT up to 45 °C

Additional Published Specifications

Legacy Model NameATR3CMOS07100KPA
Sensor Diagonal17.5mm
LCG Read Noise1.4-5.41 e-
Maximum SNR43dB
Frame Buffer512MB
Sensor Chamber WindowAdjustable heating window
Back Focal Distance17.5mm
Protective WindowIR-cut / AR window
Color Filter ArrayRGGB
DDR3 Buffer512MB
Back Focus17.5mm

Technical media

Performance graphs and technical drawings

Official sensor-response, performance, and mechanical imagery for the ATR428C.

ATR428C spectral response curve
ATR428C spectral response curve
ATR428C sensor optical format
ATR428C sensor optical format
ATR428C deep sky cooled color camera
ATR428C deep sky cooled color camera

System integration

Integration and compatibility

Use these checks to connect ATR428C to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Lens and microscope interface
Mount: M42 / M54 astronomy adapters
Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.
Sensor and sampling
Sensor: Sony IMX428 color CMOS · Sensor Type: Global-shutter color CMOS
Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.
Interface and data rate
Frame Rate: 25.7 fps · Interface: USB 3.0
Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.
Cooling and noise floor
Dynamic Range: 76.4 dB · Read Noise: 5.41–1.4 e⁻
Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Technical FAQ

Integration questions for ATR428C

What lens mount is required for the ATR428C?

Mount: M42 / M54 astronomy adapters. Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.

What sensor and pixel pitch does the ATR428C use?

Sensor: Sony IMX428 color CMOS · Sensor Type: Global-shutter color CMOS. Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.

How does the ATR428C connect to the acquisition computer?

Frame Rate: 25.7 fps · Interface: USB 3.0. Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.

What is the noise performance of the ATR428C?

Dynamic Range: 76.4 dB · Read Noise: 5.41–1.4 e⁻. Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Need help choosing?

Tell us your sensor, resolution, spectral range, frame-rate, interface, and software requirements and we will confirm the matching configuration and lead time.

Open camera finder

Model selection

Nearby series comparison

Compare ATR428C with the closest available models in the ATR DSO cooled family.

Selection parameterATR428C (current)ATR294MATR428M
SensorSony IMX428 color CMOSSony IMX492 monochrome CMOSSony IMX428 monochrome CMOS
Resolution7.04 MP (3200 × 2200)11.6 MP (4128 × 2808)7.04 MP (3200 × 2200)
Sensor size1-inch, 14.4 × 9.9 mm4/3-inch, 19.11 × 13.0 mm1-inch, 14.4 × 9.9 mm
Pixel size / frame rate4.5 µm4.63 µm4.5 µm

Other cameras on the IMX428 sensor

The IMX428 appears in 16 models across the catalogue, differing in cooling, shutter, interface and colour filter. Compare them side by side before settling on a variant.