Product model directory
Photoelectric Testing Systems model catalog
Browse 13 models and product ranges across 13 product families. Page 1 shows entries 1–13.
- Automated spectral response and mappingSCS1000SCS1000 Automated Quantum Efficiency SystemSCS1000 is an integrated quantum efficiency platform with software-controlled measurement modes, reference-detector switching and spot selection. Measures spectral response, EQE and IQE with optional reflectance, transmittance and mapping functions.View product →
- CCD and CMOS sensor evaluationDSR900DSR900 Camera Characterisation SystemDSR900 automates camera and imaging-sensor characterisation with uniform monochromatic illumination, a dark enclosure and analysis software. Supports EMVA 1288 measurement workflows for visible and near-infrared cameras.View product →
- Detector spectral responsivityDSR600DSR600 Spectral Responsivity Calibration SystemDSR600 automates spectral responsivity and quantum efficiency characterisation for UV, visible and near-infrared detectors. Configurations cover 200–2500 nm and support photovoltaic devices, bias-dependent I–V and tandem-cell EQE measurements.View product →
- Large-area photocurrent mappingSCS800SCS800 Solar Cell Defect Mapping SystemSCS800 uses galvanometer-scanned laser excitation to map photocurrent and photovoltage across solar cells and photoelectric materials. Field options up to 300 × 300 mm support spatial uniformity studies and defect localisation.View product →
- Microdevice photoelectric characterisationDSR300DSR300 Microdevice Spectral Response SystemDSR300 is a microscope-based platform for spectral responsivity, external quantum efficiency, photocurrent mapping and response-rate measurements. A 40 µm probe spot targets small detector areas and microstructured devices.View product →
- Microscopic LBIC mappingDSR500-LBICDSR500-LBIC Micro-Photocurrent Imaging SystemDSR500-LBIC uses a galvanometer-scanned microscope to record local photocurrent and I–V curves while the sample remains stationary. The standard 20× objective provides a 260 × 200 µm scan field, with selectable scan steps down to 0.2 µm.View product →
- Photovoltaic I–V characterisationSolarIVSolarIV Solar Cell I–V Test SystemMeasure illuminated and dark I–V curves, conversion efficiency, fill factor and series and shunt resistance. SolarIV-150A and SolarIV-300A combine a solar simulator, digital source meter, reference cell and analysis software.View product →
- Programmable LED solar simulationSS-L140 / SS-L300SS-L140 / SS-L300 Steady-State LED Solar SimulatorsA 21-wavelength LED array covers 350–1100 nm with independently controlled channels. SS-L140 and SS-L300 provide 140 mm and 300 mm square illuminated areas for steady-state photovoltaic and materials testing.View product →
- Single-photon detector calibrationDSR600-PDEDSR600-PDE Photon Detection Efficiency SystemDSR600-PDE measures photon detection efficiency versus wavelength by comparing a photon-counting detector with a calibrated reference through an integrating sphere. Supports SPAD, SiPM, PMT and other single-photon-sensitive detectors.View product →
- Solar irradiance calibrationQE-B1QE-B1 Reference Solar CellQE-B1 is a monocrystalline silicon reference solar cell for setting the irradiance of a solar simulator before photovoltaic I–V measurements. Filter options adapt the reference response to the measurement.View product →
- Solar-cell EQE, IQE and IPCESCS600SCS600 Solar Cell Quantum Efficiency SystemSCS600 measures spectral response and quantum efficiency with reflective optics, camera-assisted alignment and AC/DC acquisition. Xenon, tungsten-halogen and dual-source configurations support different wavelength ranges.View product →
- Transient photocurrent and photovoltageDSR800DSR800 Transient Photoelectric Response SystemDSR800 uses pulsed optical excitation and configurable acquisition to measure transient photocurrent, photovoltage and response times. Microscope optics, selectable lasers and probe fixtures support detector and photovoltaic dynamics experiments.View product →
- Xenon solar simulationSiriusSirius Xenon Solar SimulatorsSirius solar simulators use short-arc xenon lamps with AM1.5G filtering, adjustable irradiance and a motorised shutter. Select a 40 × 40 mm or 60 × 60 mm illuminated field and the output direction required by the experiment.View product →