40 models · 10 series
Infrared Laser,1550 NM Infrared Diode Lasers, Infrared Laser System.
24 models| Model | Wavelength | Output / average power | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Operating temperature (°C) | Storage temperature (°C) | Humidity (%) | Weight (g) | Transverse mode | Beam divergence, full angle (mrad) | Expected lifetime (hours) | Warranty (years) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Warm-up time | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | Warm-up time (minutes) | Cooled method | Power supply (100-240VAC) | Noise of amplitude (rms, 20Hz-20MHz) | Spectral line width (MHz) | M2 | Operating temperature (℃) | Operating voltage (VAC) | Power stability (rms, 4 hours , ±3℃) | Polarization state (dB) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1550 | 1550 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-1550 | 1550 nm | 1~10 mW | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -10°C to +45°C | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-1550 | 1550 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-1550 | 1550 nm | 1~15 mW | – | – | – | Cable with flying leads | – | – | – | – | Near TEM00 | <3 | 10000 | 1 | 3VDC (TTL10kHz, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-FC-1550 | 1550 nm | 1~500 mW | – | – | – | 9 pin connector | – | – | – | – | Multimode | <10 | 10000 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-1550 | 1550 nm | 1~2000 mW | – | – | – | 9 pin connector | – | – | – | – | Multimode | <10 | 10000 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550 | 1550 nm | 1~600 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1550DFB-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1550L | 1550 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550R | 1550 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | – | – | Datasheet |
| MDL-N-1550 | 1550 nm | 1~3.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-W-1550 | 1550 nm | 100~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1550 | 1550 nm | 1~600 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | – | – | – | – | Datasheet |
| MLL-III-1550L | 1550 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1550-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | – | – | – | – | Datasheet |
| SF-D-1550 | 1550 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| SF-III-1550 | 1550 nm | 1~40 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-1550DFB | 1550 nm | 1~50 mW | – | – | – | – | 25±3 | – | – | – | TEM00 | <1.5 | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | – | – | – | – | – | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | ~3 | <1.1 | – | – | – | – | Datasheet |
| FC-1550 | 1550 nm | 1~10 W | – | – | – | – | – | – | – | – | – | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | SMA905, FC/PC optional | – | – | – | Air cooled | – | – | – | – | 10-35 | 100-240 | – | – | Datasheet |
| FL-1550-CW | 1550 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | – | <15 | Air cooled or water cooled (optional) | – | – | – | – | 15-35 | – | <3%, <2% | Random / >15 | Datasheet |
| MDL-1550(FC) | 1550 nm | 1~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Optical noise | M² | |
|---|---|---|---|---|---|---|
| 1550 | 1550 nm | 1~10 W | <5 kHz | <0.05% RIN(DC-3 MHz) | <1.1 |
Nanosecond Fiber Laser |
3 models| Model | Wavelength | Output / average power | Pulse width | Power stability | M² | Single pulse energy (uJ) | Energy stability (rms) | Pulsed width (ns) | Rep. rate | Transverse mode | Fiber connector | Fiber length(m) | Fiber Jacket | Beam diameter (mm) | Polarization state (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC/VDC) | Expected lifetime (hours) | Fiber length (m) | Fiber jacket | Operating voltage (VDC/VAC) | frequency | stability, good | fiber | Polarization ratio (dB) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1550-AO | 1550 nm | 1-20 uJ | 0.5-50 ns | – | <1.1 | >2 / >20 | <3%, <2% | 0.5-5 / 5-50 | 1-200Hz (adjustable) | TEM00 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | <15 | Air cooled | 15-35 | 110/220VAC or 12V/11.5A | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| FL-1550-Nano | 1550 nm | 50-1000 mW | 0.5-50 ns (Adjustable) | <3%, <2% | <1.5 | – | – | – | 50kHz-1MHz | TEM00 | FC/APC, Collimator optional | – | – | 4±1 (Collimator output) | Random / >15 | – | Air cooled | 15-35 | – | >10000 | 1 | PVC, Metal optional | 12V/11.5A or 110/220VAC | – | – | – | – | – | Datasheet |
| FL-1550-S | 1550 nm | 1 uW-10 mW Peak power | 5-100 ns (Adjustable) | <3%, <2%, <1% | <1.2 | – | – | – | 1Hz-100KHz, 1Hz-10MHz (adjustable) | – | – | – | – | 4±1 (Collimator output) | – | <5 | Conduction | 15-35 | – | >10000 | – | – | – | all / fiber / pulsed | beam / profile, | sensing, / life | Random / >15 | 12V/11.5A | Datasheet |
LOW Noise Fiber Laser |
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | characteristics of ultra-stable output power, | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Pointing stability (urad) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1550-LN-L | 1550 nm | 1-10000 mW | <0.004 nm | <2%, <1%, <0.5% | <0.05% | <1.1 | TEM00 | SLM | Current adjustment range / 1-100% | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | <5 / <10 | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | Datasheet |
Picosecond Fiber Laser |
2 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | M² | stability, | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC/VAC) | Expected lifetime (hours) | fiber | M2 | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1550-Pico | 1550 nm | 100-1000 mW | 0.1-20 MHz | 100-900 ps | <3%, <2% | <1.2 | Rep. rate3 / 100kHz-20MHz | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / > 15 | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | – | – | Datasheet |
| FL-1550-PS | 1550 nm | 1-2000 mW | 20-60 MHz | <10 ps | <3%, <2%, <1%, <0.5% | <1.2 | – | – | – | – | – | Random / > 15 | <15 | Air cooled | 15-35 | – | >10000 | pulsed / laser / at | <1.2 / <1.5 | 12V/11.5A | Datasheet |
Single Frequency Fiber Laser |
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | |
|---|---|---|---|---|---|---|---|
| FL-1550-SLM | 1550 nm | 1-10000 mW | <10 kHz, <5 kHz | <2%, <1%, <0.5% | <0.05% optional | < 1.1 | Datasheet |
High Power Laser Diode Module |
2 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature(10 s max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-1550-10-2 | 1550 nm | 10 W | - / 8.6 / - / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | Datasheet |
| LDM-1550-15-2 | 1550 nm | 15 W | 12 / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | Datasheet |
SM Fiber Coupled Laser |
2 models| Model | Wavelength | Output / average power | Power stability | M² | Spectral line width (nm) | Transverse mode | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | machine vision, metrology, fiber optic | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-III-1550-SLD | 1550 nm | 1~8 mW | <2%, <1%, <0.5% | <1.5 | ~60 | Near TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MDL-III-1550-SLD-SM | 1550 nm | 1~8 mW | <2%, <1%, <0.5% | 1.1 | ~60 | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | M2 after fiber / ~1.1 | Datasheet |
Nanosecond Pulse Diode Laser |
2 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Modulation Depth (extinction ratio) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-III-P-1550 | 1550 nm | ~15.3 ( @6 kHz) | 1~6 kHz | ~150 ns ( @6 kHz) | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-1550 | 1550 nm | 1-10 mW | – | – | <2%, <1%, <0.5% | <1.5 | Near TEM00 | <3.0 | >1000000:1 | <5 | Conduction | 10-35 | 12V/3.34A | >10000 | Datasheet |
TEMoo Mode Diode Laser |
2 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-F-1550 | 1550 nm | 1~180 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-LN-1550 | 1550 nm | 1~180 mW | <2%, <1%, <0.5% | <1.1 | TEM00 | – | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.