27 models · 3 series
Infrared Laser,1060 NM Infrared Diode Lasers,infrared Diode Laser System.
24 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Modulation option | Fiber type | Fiber connector | Fiber jacket | Operating temperature (℃) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating temperature | Storage temperature | Humidity | Dimensions of internal PCB | Warranty | Operating voltage(external PCB1) | Operating voltage(external PCB2) | After fiber output power (W) | Power stability (rms, over 4 hours) | Fiber core diameter (μm) | Fiber NA | Fiber length (m) | TTL / Analog modulation | Cooling Way | Dimensions(mm3) | Line width(nm) | Beam diameter (mm) | Polarization state | Power supply (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1060(FC) | 1060 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-1060 | 1060 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1060L | 1060 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-1060 | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1060 | 1060 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1060 | 1060 nm | 1.5~2.5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1060-SM | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | SM fiber, PM fiber optional | FC/PC, FC/APC optional | Metal, PVC optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1060 | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060-SLD | 1060 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060L | 1060 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060 | 1060 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1060 | 1060 nm | 1.5~2.5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-1060 | 1060 nm | 2.5~5 W | – | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060-SLD-SM | 1060 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1060-SM | 1060 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1060 | 1060 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-1060 | 1060 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-1060 | 1060 nm | 1~100 mW | – | NearTEM00 | <1 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | 10°C to 35°C | -20°C to 80°C | < 90 %, non-condensing | mm2 / Φ15×90 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-H-1060 | 1060 nm | 1~1500 mW | – | Multimode | <5 | – | – | – | – | 10,000 | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | 0°C to 40°C | -20°C to 80°C | <90 %, non-condensing | – | months / 6 | 3VDC | 5VDC(TTL10kHz or Analog0-5V) | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-E-1060 | 1060 nm | 1~40 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-1060B | 1060 nm | 20~300 W | – | – | – | – | – | – | – | 10000 | – | – | – | SMA905 | – | 10~40 | – | – | – | – | – | – | – | – | – | – | – | 1 year | – | – | >20, …, 30 / >30, …, 80 / 80~300(On request) | <2%, <1%, <0.5% | 400/600 | 0.22 | 2 | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | Air Cooled / Water Cooled | On request | – | – | – | – | Datasheet |
| FL-1060-CW | 1060 nm | 1~100 W | – | – | – | <15 | Air cooled | – | – | >10000 | – | – | – | FC/APC, Collimator optional | PVC, Metal optional | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 | – | – | – | <2nm | 4±1 (Collimator output) | Random | 110/220VAC | Datasheet |
| MDL-NS-1060 | 1060 nm | 1~280 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-1060 | 1060 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
High Power Line Lasers OEM Modules
1 model| Model | Wavelength | Output / average power | Power stability | Wavelength options (nm) | TTL / analog modulation | Fan angle | Fan angle options | Line uniformity | Straightness error | Integration | Head dimensions (mm) | Power supply | Operating temperature | Storage temperature | Humidity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OEM-MF | 375–1550 nm | Up to 15 W; wavelength-dependent | <1%, <2% or <3% RMS over 4 hours; select configuration | 375, 405, 450, 488, 520, 640, 655, 750, 785, 808, 830, 852, 915, 940, 980, 1060, 1470, 1550 | TTL or analog up to 30 kHz | 5–100°; discrete options | 5°, 7°, 10°, 15°, 30°, 45°, 50°, 60°, 75°, 90°, 100° | 80% (luminance uniformity) | <0.5% | Compact OEM head; separate driver | 80.5 × 50 × 41 | PSU-H-LED / PSU-H-FDA: 100–240 V AC; PSU-H-OEM: 12 V DC | 10–35 °C; specifications tested at 25 °C | -20 to +80 °C | <90%, non-condensing | Datasheet |
High Power Line Lasers Heads with Separate Drivers
2 models| Model | Wavelength | Output / average power | Power stability | Wavelength options (nm) | TTL / analog modulation | Fan angle | Fan angle options | Line uniformity | Straightness error | Integration | Head dimensions (mm) | Power supply | Operating temperature | Storage temperature | Humidity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-III | 375–1550 nm | Up to 2.5 W; wavelength-dependent | <1%, <2% or <3% RMS over 4 hours; select configuration | 375, 405, 450, 488, 520, 640, 655, 750, 785, 808, 830, 852, 915, 940, 980, 1060, 1470, 1550 | Up to 100 kHz with PSU-A-D; 30 kHz with PSU-III-LED / PSU-III-FDA | 5–100°; discrete options | 5°, 7°, 10°, 15°, 30°, 45°, 50°, 60°, 75°, 90°, 100° | 80% (luminance uniformity) | <0.5% | Separate head and power supply | 155 × 73 × 46.2 | PSU-III-LED / PSU-III-FDA: 85–264 V AC; PSU-A-D: 100–240 V AC | 10–35 °C; specifications tested at 25 °C | -20 to +80 °C | <90%, non-condensing | Datasheet |
| MDL-H | 750–1060 nm | Up to 5 W; wavelength-dependent | <1%, <2% or <3% RMS over 4 hours; select configuration | 750, 808, 1060 | TTL or analog up to 30 kHz | 5–100°; discrete options | 5°, 7°, 10°, 15°, 30°, 45°, 50°, 60°, 75°, 90°, 100° | 80% (luminance uniformity) | <0.5% | Independent cooling; separate driver | 169 × 77 × 60.2 | PSU-H-LED / PSU-H-FDA: 100–240 V AC | 10–35 °C; specifications tested at 25 °C | -20 to +80 °C | <90%, non-condensing | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.