18 models · 4 series
Infrared Laser, 1053 NM Infrared Laser Module, Infrared DPSS Lasers.
11 models| Model | Wavelength | Output / average power | Pulse energy | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Power stability (rms, 4 hours , ±3℃) | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours) | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Relative intensity noise (rms,10Hz-3MHz) | Pointing stability (urad) | Beam diameter at the aperture 1/e2 (mm) | Beam diameter at the aperture (mm) | Pulse duration (ns) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1053-SU | 1053 nm | 1~1500 mW | – | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1053 | 1053 nm | 1~1500 mW | – | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1053-LN-L | 1053 nm | 1~10 W | – | TEM00 | – | <1.1 | – | <30 | – | – | – | >10000 | – | – | <2%, <1%, <0.5% | SLM | 1-100% | <0.004 | <0.1%, <0.05% | <±200 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | Air cooled or Water cooled | 15-30 | 110/220VAC | – | – | – | – | – | Datasheet |
| FL-1053-LN-H | 1053 nm | 10~35 W | – | TEM00 | – | TEM00, <1.1 | – | <30 | – | – | – | >10000 | – | – | <1%, <0.5% | SLM | 1-100% | <0.004 | – | – | Collimator | <3 | Metal | 4±1 (Collimator output) | >15, after PM fiber | Air cooled (≤20W) / Water cooled (≤35W) | 15-30 | 110/220VAC | <0.1%, <0.05% | <5 / <10 | – | – | – | Datasheet |
| MIL-H-1053 | 1053 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-U-1053-SU | 1053 nm | 1.5~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-1053SLD | 1053 nm | 1~8 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| AO-S-1053 | 1053 nm | 1~1000 mW | 1~250 uJ | TEM00 | – | – | >100:1, Horizontal (Vertical optional) | <10 | – | PSU-AOM-DL | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | ~1.2 | – | – | Datasheet |
| FL-1053-CW | 1053 nm | 1~200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-H-1053 | 1053 nm | 300~450 mW | 30~50 uJ | TEM00 | – | – | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~1.5 | – | Datasheet |
| MPL-U-1053-SU | 1053 nm | 1~450 mW | 1~50 uJ | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~10 | Datasheet |
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
4 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Single pulse energy (nJ) | Rep. rate (MHz) | Ave power stability (rms, 4 hours±3℃) | pulse | Warm-up time (minutes) | Transverse mode | M2 factor | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Frequency doubler | Longitudinal mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Operating voltage (VDC) | Power stability (rms, 4 hours , ±3℃) | Current adjustment range | Frequency shift (MHz) (over ±2℃and 8 hours ) | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Power supply (VAC) | Beam divergence, full angle (mrad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1053 | 1053 nm | 1~120 mW | <50 MHz optional | – | <0.5% | <1.5 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <10 | TEM00 | <1.2 | >100:1 Vertical | Air cooled | 10-35 | 12V/6.67A | >10000 | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U-1053-SU | 1053 nm | 1~200 mW | <1 MHz | – | <2% | <1.2 | – | – | – | – | <5 | TEM00 | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-H-FDA | >10000 | – | Single | <1.0 | <1.5 | <8 | <±200 | 10-35 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1053-SLM | 1053 nm | 1~10 W | <10 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | <30 | TEM00 | – | – | Air cooled or Water cooled | 15-30 | – | >10000 | – | SLM | – | – | – | – | – | – | <2%, <1%, <0.5% | 1-100% | <±200 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | 110/220VAC | – | Datasheet |
| MSL-III-1053L | 1053 nm | 1~120 mW | <50 MHz optional | <2%, <1%, <0.5% | <0.5% | <1.5 | – | – | – | – | <5 | – | – | – | – | 10-35 | PSU-III-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~2.0 | Datasheet |
High Energy Laser |
2 models| Model | Wavelength | Pulse energy | Repetition rate | Power stability | Average power (mW) 1 | Ave power stability (rms, 4 hours±3℃) | pulse | Warm-up time (minutes) | Transverse mode | M2 factor | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Frequency doubler | High energy diode pumped all solid | features of high single pulse energy, short | Beam diameter (mm) | Beam divergence, full angle (mrad) | Power supply (24VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1053 | 1053 nm | 1-1000 uJ | 10-1000 Hz | – | 1-50 | <2%, <1% | duration, / high | <10 | TEM00 | <1.2 | >100:1 Vertical | Air cooled | 10-35 | 12V/6.67A | >10000 | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | |
| EO-1053-N | 1053 nm | 1-1000 uJ | 10-1000 Hz | <5% | – | – | – | <15 | – | – | – | Air cooled | 15-30 | – | >10000 | – | Power stability (rms, 4 hours ±3℃) / <5% | Rep. rate / 10Hz, 100Hz, 200Hz, 500Hz, 1000Hz optional | ~1mm | <3mrad | PSU-EO-N (24V/13A) | Datasheet |
Fiber Coupling Multi Wavelength Laser |
1 model| Model | Wavelength | Output / average power | Power stability | M² | |
|---|---|---|---|---|---|
| RGB-1053/1064 | 1053 nm | 200/200 mW | <1% | <1.1 | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.