7 models · 2 series
1040 NM Infrared Solid State Laser
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence (mrad) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Line width(nm) | Fiber length (m) | Polarization state | Power stability (rms, over 4 hours) | Fiber NA | Fiber Connector | Fiber Length (m) | Cooling way | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1040-SLM | 1040 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1040 | 1040 nm | 1~100 mW | – | TEM00 | – | – | – | – | <1.5 | – | – | – | – | – | <5 | – | – | – | >10000 | <0.1 | <1% | <2.0 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1040-LN-L | 1040 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | <0.004 | <±200 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-H-1040 | 1040 nm | 1~100 mW | – | TEM00 | – | – | – | – | <1.5 | – | – | – | – | – | <5 | – | – | – | >10000 | – | – | <2.0 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | ~1.2 | >100:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1040-CW | 1040 nm | 1~100 W | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | – | – | <2nm | 1 | Random | – | – | – | – | – | – | Datasheet |
| FC-1040 | 1040 nm | 1~90 mW | – | – | – | – | – | – | – | – | – | – | – | – | <5 | – | 10~35 | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | <1%, <2%, <3%, <5% | 0.22 | SMA905 | 1 (Other lengths are available on request) | By air | 1 year | Datasheet |
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Optical noise | M² | |
|---|---|---|---|---|---|---|
| 1040 | 1040 nm | 1~10 W | <10 kHz | <0.05% RIN(DC-3 MHz) | <1.1 |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.