13 models · 3 series
1120 NM IR Laser, Infrared Diode Laser |
9 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Operating temperature (°C) | Power supply (100-240VAC) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | biomedicine, spectroscopy, laser sintering, laser | Polarization ratio | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1120-SLM | 1120 nm | 1~2 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1120 | 1120 nm | 1~1000 mW | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Conduction | – | – | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | Datasheet |
| FL-1120-LN-L | 1120 nm | 1~2 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | <0.004 | <±200 | – | – | – | Datasheet |
| MLL-H-1120 | 1120 nm | 1~2.5 W | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| MLL-F-1120 | 1120 nm | 2.5~5 W | – | – | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | 10-35 | – | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | <3.0 | – | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| MDL-III-1120 | 1120 nm | 1~1000 mW | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Conduction | – | – | >10000 | <2%, <1%, <0.5% | – | <3.0 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | – | Datasheet |
| MDL-H-1120 | 1120 nm | 1~2.5 W | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | <2%, <1%, <0.5% | – | <3.0 | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| MDL-F-1120 | 1120 nm | 2.5~5 W | – | Multimode | – | – | – | – | – | – | – | – | – | – | <5 | Air cooled | 10-35 | – | >10000 | – | – | <3.0 | – | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | Datasheet |
| FL-1120-CW | 1120 nm | 1~20 W | <2%, <1%, <0.5% | – | – | – | – | – | <1.3 | – | 1 | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | – | >10000 | – | – | – | – | – | – | – | Fiber connector2 / FC/APC, Collimator optional | Random | 110/220VAC | Datasheet |
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
2 models1120 NM IR Laser, Infrared Diode Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-1120 | 1120 nm | 1~5 W | Datasheet |
| MDL-1120(FC) | 1120 nm | 1~4000 mW |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.