Back to Home

Fiber Coupled Amplified Photodetectors Module Plug-Play

20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM

The HPRM is a turnkey high-speed photoreceiver engineered for advanced analog and digital applications. It supports both single-mode and multimode fiber coupling configurations. With its high conversion gain and low input-referred noise, the HPRM delivers exceptional linearity and precision. The module offers 20 GHz analog bandwidth and 3000 V/W differential conversion gain. The differential RF output utilizes dual GPPO connectors (+ and −) to minimize susceptibility to external noise and electromagnetic interference (EMI), providing excellent common-mode rejection for superior signal integrity. For added flexibility, either connector can also be used as a single-ended output relative to ground. The unit includes a pluggable low-noise power supply, ensuring simple, reliable plug-and-play operation.

20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

We confirm the exact part number for your configuration on enquiry.

Detector Type: PIN · Wavelength Range: 1200-1600nm · Bandwidth: 20GHz · Module: Non · Configuration: Differential · Fiber: SM28 · Connector: FC/APC · RF Connector: GPPO

Application context

Why this design is used

Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.

Laboratory optical integration

20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1200-1600nm, 850nm wavelength specification sets source and detector compatibility. The fiber/interface entry (SM28, 50/125, 1mm) must match the connected components.

Fiber-optic instrumentation

20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1200-1600nm, 850nm wavelength specification sets source and detector compatibility. The fiber/interface entry (SM28, 50/125, 1mm) must match the connected components.

Downloads

Datasheets & documents

System integration

Integration and compatibility

Use these checks to connect 20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber
Fiber: SM28, 50/125, 1mm · Connector: FC/APC, FC/PC, Special
Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength and loss budget
Wavelength Range: 1200-1600nm, 850nm
Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Technical FAQ

Integration questions for 20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM

Which fiber and connector does the 20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM use?

Fiber: SM28, 50/125, 1mm · Connector: FC/APC, FC/PC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

How should the 20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM be included in an optical power budget?

Wavelength Range: 1200-1600nm, 850nm. Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Need this configured?

Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.

Model selection

Nearby series comparison

Compare 20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM with the closest available models in the Fiber Coupled Amplified Photodetectors Module Plug-Play family. Confirm option-dependent values on the final configuration before ordering.

Selection parameter20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM (current)10 MHz Fiber Optical Amplified Detector / Receiver: 0.9-2.6 µm3 GHz Fiber Optical Amplified Detector / Receiver
Wavelength range1200-1600nm, 850nm900-2570nm900-1600nm, Special
Optical performanceConfirm for this modelConfirm for this modelConfirm for this model
Fiber typeSM28, 50/125, 1mmConfirm for this modelConfirm for this model
Connector / controlFC/APC, FC/PC, SpecialConfirm for this modelFC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, Special