Fiber Coupled Detectors
High Speed Fiber Coupled InGaAs PIN Photodiode 10GHz, 25GHz
The Fiber Coupled High-Speed InGaAs PIN Photodiode is based on a unique package featuring a high-speed, fast rise and fall response. The component integrates a fiber with a high-sensitivity photodiode for signal detection. The response is analog without TIAC. Our design minimizes component assembly costs and module footprint while increasing stability over wide temperature and wavelength ranges. We offer three analog response speeds of 10GHz, 20GHz, and 32GHz. Detector integrated with bias and SMA RF connector is also available online.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 1000 - 1620 · Speed: 10GHz · PCB: None · Package: Standard · Fiber Type: SM28 · Fiber Cover: 900um tube · Fiber Length: 0.5m · Connector: None
System integration
Integration and compatibility
Use these checks to connect High Speed Fiber Coupled InGaAs PIN Photodiode 10GHz, 25GHz to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SM28, PM1550, 50/125 · Fiber Cover: 900um tube, Bare fiber
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1000 - 1620
- Check the Fiber Coupled Detectors passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for High Speed Fiber Coupled InGaAs PIN Photodiode 10GHz, 25GHz
Which fiber and connector does the High Speed Fiber Coupled InGaAs PIN Photodiode 10GHz, 25GHz use?
Fiber Type: SM28, PM1550, 50/125 · Fiber Cover: 900um tube, Bare fiber. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the High Speed Fiber Coupled InGaAs PIN Photodiode 10GHz, 25GHz be included in an optical power budget?
Wavelength: 1000 - 1620. Check the Fiber Coupled Detectors passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
