Fiber Coupled Detectors
The Tap Optical Power Monitor is a hybrid fiber optical passive component that integrates a thin-film tap of flat spectral response with a high sensitivity PIN photodiode for power monitoring applications. The Power Monitor minimizes component assembly costs and module footprint while increasing module design efficiency by facilitating fiber Management. The Power Monitor combines the functionality of an optical coupler and a photodiode while delivering low insertion loss and low dark current with high temperature stability over a wide wavelength range. Our directional version works well from 1260nm to 1620nm band.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Tap Ratio: 3% · Wavelength: 1260~1620 · Directivity: None · Package: Standard · Fiber Type: SMF-28 · Fiber Cover: Bare fiber · Fiber Length: 0.25m · Connector: None
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Single Mode and PM Inline Tap Power Monitor: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1260~1620, 1880, 2000, 1060, 980, 850, 780, 630 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, PM1550, SM600, Hi780, SM800, Hi1060, SM1950, 50/125, PM630, PM780, PM850, PM980, PM1950) must match the connected components.
Single Mode and PM Inline Tap Power Monitor: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1260~1620, 1880, 2000, 1060, 980, 850, 780, 630 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, PM1550, SM600, Hi780, SM800, Hi1060, SM1950, 50/125, PM630, PM780, PM850, PM980, PM1950) must match the connected components.
System integration
Use these checks to connect Single Mode and PM Inline Tap Power Monitor to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SMF-28, PM1550, SM600, Hi780, SM800, Hi1060, SM1950, 50/125, PM630, PM780, PM850, PM980, PM1950 · Fiber Cover: Bare fiber, 900umTube, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1260~1620, 1880, 2000, 1060, 980, 850, 780, 630. Check the Fiber Coupled Detectors passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Single Mode and PM Inline Tap Power Monitor with the closest available models in the Fiber Coupled Detectors family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Single Mode and PM Inline Tap Power Monitor (current) | Multi-Mode Inline Tap Power Monitor | Mini Single Mode Inline Tap Power Monitor |
|---|---|---|---|
| Wavelength range | 1260~1620, 1880, 2000, 1060, 980, 850, 780, 630 | 850nm, Special | C-Band 1550nm, 1260-1620nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SMF-28, PM1550, SM600, Hi780, SM800, Hi1060, SM1950, 50/125, PM630, PM780, PM850, PM980, PM1950 | 50/125um, 62.5/125um, Special | SM28, Panda |
| Connector / control | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC, Special | None | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC, Special |
