Fiber Coupled Detectors
Mini Single Mode Inline Tap Power Monitor
The Tap Optical Power Monitor is a hybrid fiber optical passive component that integrates a thin-film tap of flat spectral response with a high sensitivity PIN photodiode for power monitoring applications. The Power Monitor minimizes component assembly costs and module footprint while increasing module design efficiency by facilitating fiber Management. The Power Monitor combines the functionality of an optical coupler and a photodiode while delivering low insertion loss and low dark current with high temperature stability over a wide wavelength range. Our directional version works well from 1260nm to 1620nm band.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: MOPM-02152131
Tap Ratio: 2% · Wavelength: C-Band 1550nm · Bandwidth: 0.5G · Fiber Cover: 900um loose tube · Fiber Type: SM28 · Fiber Length: 1.0 m · Connector: None
System integration
Integration and compatibility
Use these checks to connect Mini Single Mode Inline Tap Power Monitor to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Cover: 900um loose tube, Bare fiber · Fiber Type: SM28, Panda
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: C-Band 1550nm, 1260-1620nm
- Check the Fiber Coupled Detectors passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Mini Single Mode Inline Tap Power Monitor
Which fiber and connector does the Mini Single Mode Inline Tap Power Monitor use?
Fiber Cover: 900um loose tube, Bare fiber · Fiber Type: SM28, Panda. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Mini Single Mode Inline Tap Power Monitor be included in an optical power budget?
Wavelength: C-Band 1550nm, 1260-1620nm. Check the Fiber Coupled Detectors passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Mini Single Mode Inline Tap Power Monitor with the closest available models in the Fiber Coupled Detectors family.
| Selection parameter | Mini Single Mode Inline Tap Power Monitor (current) | Inline No-Gap Tap Power Monitor | Multi-Mode Inline Tap Power Monitor |
|---|---|---|---|
| Wavelength range | C-Band 1550nm, 1260-1620nm | 1550, 350, 450, 530, 850, 1060, 1310, 650, 2000, 750, 950 | 850nm, Special |
| Fiber type | SM28, Panda | SMF28e, SM400, SM450, SM600, Hi780, Hi1060, SM1950, MM 50/125μm, MM 62.5μm, MM 105/125μm, SM850, MM200 μm, MM300 μm, MM400 μm, MM600 μm, MM800 μm, MM 1 mm, PM250, PM400, PM460, PM630, PM780, PM850, PM980, PM1550, PM1950 | 50/125um, 62.5/125um, Special |
| Connector / control | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC, Special | None, FC/PC, FC/APC, SMA, Special | None |
