Photodiodes
Cooled Photodiode InAsSb 2.2 – 6.6 µm
The CPOD serials cooled InAsSb photodiode is a photovltaic muti-junction device that provides reduced noise for detecting mid-infrared light in the 2.2-6.6 µm range. These detectors are integrated with one stage TEC cooler and hermetically sealed to ensure longevity. It has an AR coated silicon window and package in a TO39 can. It is fully compliant with RoHs. Additionally, a driving PCB with an amplifier is available for convenient use.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: CPOD-61111100
Material Type: InAsSb · TEC Type: 1 stage 10°C · Integrated Chopper: Non · Detector Size: 1mm · Window: Silicon · AR Coated: Yes · Driver: No
System integration
Integration and compatibility
Use these checks to connect Cooled Photodiode InAsSb 2.2 – 6.6 µm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Control interface
- Driver: No, Yes
- Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
Technical FAQ
Integration questions for Cooled Photodiode InAsSb 2.2 – 6.6 µm
Does the Cooled Photodiode InAsSb 2.2 – 6.6 µm require a controller?
Driver: No, Yes. Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Cooled Photodiode InAsSb 2.2 – 6.6 µm with the closest available models in the Photodiodes family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Cooled Photodiode InAsSb 2.2 – 6.6 µm (current) | Cooled Photodiode Extended InGaAs 1.2 – 2.6 µm | Cooled Photodiode InGaAs 0.85 – 1.7 µm |
|---|---|---|---|
| Wavelength range | Confirm for this model | Confirm for this model | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | Confirm for this model |
| Connector / control | No, Yes | No, Yes | No, Yes |
