Technology guide
PIN photodiodes: photocurrent, capacitance and readout
Match the active area and semiconductor band to the optical signal, then choose bias and amplification for the required bandwidth.
- 01Photons
- 02Intrinsic region
- 03Photocurrent
- 04Amplifier
How it works
- A PIN photodiode has an intrinsic region between p-type and n-type semiconductor regions. Absorbed photons generate charge carriers that contribute to photocurrent.
- Material and optical construction determine the response band. Silicon and InGaAs devices must not be assigned the same wavelength limits.
- Reverse bias can change capacitance and speed, while zero-bias operation has different noise and linearity tradeoffs. Use the actual device's recommended operating regime.
- The photodiode and amplifier form a coupled signal chain. Increasing active area can ease alignment while increasing capacitance and affecting readout bandwidth.
What to compare
| Parameter | Check in the specification |
|---|---|
| Responsivity | Use the value at the signal wavelength and retain temperature conditions. |
| Active area | Match spot position and beam extent to the sensitive region. |
| Capacitance | Keep bias and area with the quoted capacitance. |
| Readout | Check transimpedance gain, bandwidth, noise and output swing together. |
Integration
- Confirm whether the product is a bare diode, biased detector or amplified module.
- Plan optical attenuation so the detector and amplifier remain within their linear limits.
- Match connector termination and coupling mode to the actual receiving instrument.
Related products
References
Discuss the configuration. Send the wavelength, signal level, active area and bandwidth requirements.