Technology guide
Avalanche photodiodes: internal gain and bias control
Choose APD gain and readout for the signal level while retaining bias, temperature and noise conditions.
- 01Absorbed photons
- 02Primary carriers
- 03Avalanche gain
- 04Electrical readout
How it works
- An avalanche photodiode converts absorbed photons into carriers and multiplies them in a high-field region. The internal gain acts before the external readout amplifier.
- Multiplication is statistical and adds noise. More gain does not automatically improve the signal-to-noise ratio once other noise sources and saturation are included.
- Gain changes with operating bias and temperature. A detector needs the appropriate bias supply and the manufacturer's operating limits.
- Linear APD operation and Geiger-mode photon counting use different operating regimes and electronics. An APD label alone does not establish photon-counting behaviour.
What to compare
| Parameter | Check in the specification |
|---|---|
| Spectral response | Match semiconductor material, window and response band to the signal. |
| Gain conditions | Keep bias and temperature with the multiplication value. |
| Bandwidth | Compare detector capacitance, readout gain and electrical loading together. |
| Noise | Use the complete detector-amplifier noise at the intended operating point. |
Integration
- Confirm whether bias generation, temperature compensation and amplification are inside the module.
- Keep linear analogue measurements separate from single-photon timing requirements.
- Specify wavelength, received power and bandwidth when choosing the detector and readout.
Related products
References
Discuss the configuration. Send the wavelength, signal level, active area and bandwidth requirements.