2 μm Fiber Optical Components
2 µm Pigtailed Photodiode
The 2μm Fiber Pigtailed Photodiode is a coaxial package photoelectrical component. It features high responsivity, low dark current, and good temperature performance over a wide wavelength range.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 1950nm · Fiber Type: SM-28 · Fiber Cover: Bare Fiber · Fiber Length: 0.25m · Connector: FC/PC
System integration
Integration and compatibility
Use these checks to connect 2 µm Pigtailed Photodiode to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SM-28, SM1950, PM1550, Special · Fiber Cover: Bare Fiber, 900um Tube, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1950nm, 2600nm, Special
- Check the 2 μm Fiber Optical Components passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 2 µm Pigtailed Photodiode
Which fiber and connector does the 2 µm Pigtailed Photodiode use?
Fiber Type: SM-28, SM1950, PM1550, Special · Fiber Cover: Bare Fiber, 900um Tube, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 2 µm Pigtailed Photodiode be included in an optical power budget?
Wavelength: 1950nm, 2600nm, Special. Check the 2 μm Fiber Optical Components passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
