Fiber Coupled Amplified Photodetectors Module Plug-Play
The HAPD series High-Speed Analog Fiber-Coupled Amplified Detector is designed to detect and receive analog optical signals across a wide bandwidth of 100 kHz to 3 GHz. It converts an optical input into an RF output through a high-performance, low-noise, and high-linearity amplifier. This detector is ideal for high-speed fiber optic detection and RF-over-fiber applications when paired with a matching transmitter that converts an RF signal into an optical signal.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: HAPD-001252012
Low Frequency: 0.1MHz · High Frequency: 2GHz · Wavelength: 900-1600nm · Gain: 20dB · Package: Module · Fiber Connector: FC/APC
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
3 GHz Fiber Optical Amplified Detector / Receiver: Laboratory optical integration depends on preserving the optical budget through the complete path. The 900-1600nm, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, Special) must match the connected components.
3 GHz Fiber Optical Amplified Detector / Receiver: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 900-1600nm, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, Special) must match the connected components.
System integration
Use these checks to connect 3 GHz Fiber Optical Amplified Detector / Receiver to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Connector: FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 900-1600nm, Special. Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare 3 GHz Fiber Optical Amplified Detector / Receiver with the closest available models in the Fiber Coupled Amplified Photodetectors Module Plug-Play family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 3 GHz Fiber Optical Amplified Detector / Receiver (current) | 20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM | 35GHz Fiber Optical Photodetector/Receiver – MM |
|---|---|---|---|
| Wavelength range | 900-1600nm, Special | 1200-1600nm, 850nm | 1200-1600nm, 850nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | SM28, 50/125, 1mm | 50/125 |
| Connector / control | FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, Special | FC/APC, FC/PC, Special | FC/APC |
10 MHz Fiber Optical Amplified Detector / Receiver: 0.9-2.6 µm
35GHz Fiber Optical Photodetector/Receiver – SM40 GHz Balance Photodetector / Photoreceiver Module8 GHz Fiber Optical Amplified Detector / Receiver35GHz Fiber Optical Photodetector/Receiver – MM20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM