Fiber Coupled Amplified Photodetectors Module Plug-Play
8 GHz Fiber Optical Amplified Detector / Receiver
The FRXM Photoreceiver is designed for high-speed and high sensitivity analog and digital applications, featuring a high bandwidth PIN photodiode and a linear and low noise preamplifier. The module incorporates a highly stable optical coupling system. The RF output is differential, utilizing dual “+” and “−” SMA connectors, which reduces susceptibility to external noise and electromagnetic interference (EMI) while providing high common-mode rejection for superior signal integrity. Alternatively, either connector can be used as a single-ended output relative to ground, though without the advantages of differential operation. The FRXM includes a low-noise power supply for simple, plug-and-play operation.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Detector Type: PIN · Wavelength Range: 1200-1600nm · Bandwidth: 8GHz · Module: Non · Configuration: Standard · Connector: FC/APC · RF Connector: GPPO
System integration
Integration and compatibility
Use these checks to connect 8 GHz Fiber Optical Amplified Detector / Receiver to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Connector: FC/APC · RF Connector: GPPO, K
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength Range: 1200-1600nm
- Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 8 GHz Fiber Optical Amplified Detector / Receiver
Which fiber and connector does the 8 GHz Fiber Optical Amplified Detector / Receiver use?
Connector: FC/APC · RF Connector: GPPO, K. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 8 GHz Fiber Optical Amplified Detector / Receiver be included in an optical power budget?
Wavelength Range: 1200-1600nm. Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 8 GHz Fiber Optical Amplified Detector / Receiver with the closest available models in the Fiber Coupled Amplified Photodetectors Module Plug-Play family.
| Selection parameter | 8 GHz Fiber Optical Amplified Detector / Receiver (current) | 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital | 40 GHz Balance Photodetector / Photoreceiver Module |
|---|---|---|---|
| Wavelength range | 1200-1600nm | 1200-1600nm | 1200-1600nm |
| Connector / control | FC/APC | FC/APC, Special | FC/APC, Special |
Related fiber coupled amplified photodetectors module plug-play
10 MHz Fiber Optical Amplified Detector / Receiver: 0.9-2.6 µm
3 GHz Fiber Optical Amplified Detector / Receiver- 35GHz Fiber Optical Photodetector/Receiver – SM
- 40 GHz Balance Photodetector / Photoreceiver Module
- 35GHz Fiber Optical Photodetector/Receiver – MM
- 20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM