Fiber Coupled Amplified Photodetectors Module Plug-Play
50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital
The HPRM is a turnkey high-speed photoreceiver engineered for advanced analog and digital applications. It integrates a high-speed photodetector with a broadband RF amplifier to achieve an output power of 10 dBm. With its high conversion gain and low input-referred noise, the HPRM delivers exceptional linearity and precision. The RF output utilizes a 1 mm male connector. The unit includes a pluggable low-noise power supply, ensuring simple, reliable plug-and-play operation. The detector is prone to damage if the applied optical power exceeds the maximum rating; therefore, units damaged by overpower cannot be returned. One example is the use of an optical amplifier, such as an EDFA, which can produce power surges even when the average power is low. No TIA integrated, an external RF amplifier is recommended.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: HPRM-110522113G
Detector Type: PIN · Wavelength Range: 1200-1600nm · Bandwidth: 50GHz · Coupling: AC · Module: Yes · Configuration: Non Amplifier · Fiber: SM28 · Connector: FC/APC · RF Connector: GPPO
System integration
Integration and compatibility
Use these checks to connect 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber: SM28 · Connector: FC/APC, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength Range: 1200-1600nm
- Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital
Which fiber and connector does the 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital use?
Fiber: SM28 · Connector: FC/APC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital be included in an optical power budget?
Wavelength Range: 1200-1600nm. Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital with the closest available models in the Fiber Coupled Amplified Photodetectors Module Plug-Play family.
| Selection parameter | 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital (current) | 40 GHz Balance Photodetector / Photoreceiver Module | 8 GHz Fiber Optical Amplified Detector / Receiver |
|---|---|---|---|
| Wavelength range | 1200-1600nm | 1200-1600nm | 1200-1600nm |
| Fiber type | SM28 | — | — |
| Connector / control | FC/APC, Special | FC/APC, Special | FC/APC |
Related fiber coupled amplified photodetectors module plug-play
10 MHz Fiber Optical Amplified Detector / Receiver: 0.9-2.6 µm
3 GHz Fiber Optical Amplified Detector / Receiver- 35GHz Fiber Optical Photodetector/Receiver – SM
- 40 GHz Balance Photodetector / Photoreceiver Module
- 8 GHz Fiber Optical Amplified Detector / Receiver
- 35GHz Fiber Optical Photodetector/Receiver – MM