Fiber Coupled Amplified Photodetectors Module Plug-Play
The HPRM is a turnkey high-speed photoreceiver designed for advanced analog and digital applications. Its high conversion gain and low input-referred noise ensure exceptional linearity and precision. The module features 35 GHz analog bandwidth and 3000 V/W differential conversion gain, supporting digital modulation rates up to 40 Gbps. The RF output is differential, utilizing dual “+” and “−” GPPO connectors, which reduces susceptibility to external noise and electromagnetic interference (EMI) while providing high common-mode rejection for superior signal integrity. Alternatively, either connector can be used as a single-ended output relative to ground, though without the advantages of differential operation. The HPRM includes a low-noise power supply for simple, plug-and-play operation.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Detector Type: PIN · Wavelength Range: 1200-1600nm · Bandwidth: 35GHz · Module: Non · Configuration: Differential · Fiber: 50/125 · Connector: FC/APC · RF Connector: GPPO
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
35GHz Fiber Optical Photodetector/Receiver – MM: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1200-1600nm, 850nm wavelength specification sets source and detector compatibility. The fiber/interface entry (50/125) must match the connected components.
35GHz Fiber Optical Photodetector/Receiver – MM: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1200-1600nm, 850nm wavelength specification sets source and detector compatibility. The fiber/interface entry (50/125) must match the connected components.
System integration
Use these checks to connect 35GHz Fiber Optical Photodetector/Receiver – MM to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber: 50/125 · Connector: FC/APC. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength Range: 1200-1600nm, 850nm. Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare 35GHz Fiber Optical Photodetector/Receiver – MM with the closest available models in the Fiber Coupled Amplified Photodetectors Module Plug-Play family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 35GHz Fiber Optical Photodetector/Receiver – MM (current) | 3 GHz Fiber Optical Amplified Detector / Receiver | 35GHz Fiber Optical Photodetector/Receiver – SM |
|---|---|---|---|
| Wavelength range | 1200-1600nm, 850nm | 900-1600nm, Special | 1200-1600nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | 50/125 | Confirm for this model | SM28 |
| Connector / control | FC/APC | FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, Special | FC/APC |
10 MHz Fiber Optical Amplified Detector / Receiver: 0.9-2.6 µm
3 GHz Fiber Optical Amplified Detector / Receiver35GHz Fiber Optical Photodetector/Receiver – SM40 GHz Balance Photodetector / Photoreceiver Module8 GHz Fiber Optical Amplified Detector / Receiver20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM