Fiber Coupled Amplified Photodetectors Module Plug-Play
The BPRM is a turnkey High Speed Balanced Photoreceiver is designed for high-speed analog and digital light detection, offering exceptional performance with a differential gain of approximately 2800 V/W and a bandwidth of up to 40 GHz. It features two waveguide-integrated PIN photodiodes and a limiting delivers a differential output voltage swing of approximately 600 mV. The BPRM achieves excellent electrical and optical phase propagation with a total skew of less than 5 ps between balanced signal paths and 10 ps total skew for all fiber pairs. Each amplifier path includes a threshold control at the linear amplification stage to optimize the differential output signal. The BPRM includes a low-noise power supply for simple, plug-and-play operation. This photoreceiver is ideal for applications requiring high sensitivity and high-speed balanced detection.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: BPRM-114012223G
Detector Type: PIN · Wavelength Range: 1200-1600nm · Bandwidth: 40GHz · Configuration: Balance · Connector: FC/APC · RF Connector: GPPO
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
40 GHz Balance Photodetector / Photoreceiver Module: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1200-1600nm wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/APC, Special) must match the connected components.
40 GHz Balance Photodetector / Photoreceiver Module: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1200-1600nm wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/APC, Special) must match the connected components.
System integration
Use these checks to connect 40 GHz Balance Photodetector / Photoreceiver Module to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Connector: FC/APC, Special · RF Connector: GPPO, K. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength Range: 1200-1600nm. Check the Fiber Coupled Amplified Photodetectors Module Plug-Play passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare 40 GHz Balance Photodetector / Photoreceiver Module with the closest available models in the Fiber Coupled Amplified Photodetectors Module Plug-Play family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 40 GHz Balance Photodetector / Photoreceiver Module (current) | 35GHz Fiber Optical Photodetector/Receiver – SM | 50-100 GHz Fiber Optical Amplified Detector / Receiver SM28, Analog / Digital |
|---|---|---|---|
| Wavelength range | 1200-1600nm | 1200-1600nm | 1200-1600nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | SM28 | SM28 |
| Connector / control | FC/APC, Special | FC/APC | FC/APC, Special |
10 MHz Fiber Optical Amplified Detector / Receiver: 0.9-2.6 µm
3 GHz Fiber Optical Amplified Detector / Receiver35GHz Fiber Optical Photodetector/Receiver – SM8 GHz Fiber Optical Amplified Detector / Receiver35GHz Fiber Optical Photodetector/Receiver – MM20 GHz Fiber Optical Amplified Detector / Receiver – SM and MM