Back to Home

Deep-sky cooled

ATR2600C

ToupTek ATR2600C is a cooled deep-sky camera using the IMX571 sensor, with 26 MP (6224 × 4168), 3.76 µm pixels and 13.3 fps. Designed for deep-sky astrophotography, one-shot colour deep-sky imaging, high-resolution galaxy and lunar imaging. Available from Precisometer for professional astronomy systems.

Sensor
Sony IMX571 color CMOS
Sensor Type
Back-illuminated APS-C color CMOS
Resolution
26 MP (6224 × 4168)
Pixel Size
3.76 µm
Frame Rate
13.3 fps
Interface
USB 3.0
ATR2600C

Application context

Why this design is used

Choose the ATR2600C when your telescope and target benefit from APS-C, 23.4 × 15.7 mm sensor coverage, 3.76 µm sampling, two-stage TEC, ΔT ≥42 °C and 380–690 nm response.

Deep-sky astrophotography

Two-stage TEC, ΔT ≥42 °C helps control thermal noise during long exposures of galaxies, nebulae and star clusters.

One-shot colour deep-sky imaging

The colour IMX571 sensor captures broadband targets without a separate LRGB filter sequence.

High-resolution galaxy and lunar imaging

3.76 µm pixels balance image scale and detail for appropriately matched telescope focal lengths.

Photometry and time-series imaging

16-bit acquisition, 86.8 dB dynamic range and regulated cooling support repeatable quantitative observations.

Specifications

ATR2600C

32 specification rows

The ATR2600C is an astronomy camera in the ATR DSO cooled series, built around a Sony IMX571 color CMOS sensor, 26 MP (6224 × 4168) resolution, 3.76 µm pixels, frame rates up to 13.3 fps, a USB 3.0 interface. It suits deep-sky cooled where reliable imaging performance and interface compatibility matter.

Sensor & Imaging

ModelATR2600C
StatusCurrent
ApplicationDeep-sky cooled
SensorSony IMX571 color CMOS
Sensor TypeBack-illuminated APS-C color CMOS
Sensor SizeAPS-C, 23.4 × 15.7 mm
Resolution26 MP (6224 × 4168)
Pixel Size3.76 µm
Shutter TypeRolling shutter

Performance

Frame Rate13.3 fps
ADC16-bit
Peak QE>80%
Dynamic Range86.8 dB
Read Noise2.77–0.79 e⁻
Full Well51 ke⁻
Spectral Range380–690 nm

Interface & Thermal

InterfaceUSB 3.0
MountM42 / M54 astronomy adapters
CoolingTwo-stage TEC, ΔT ≥42 °C

Additional Published Specifications

Legacy Model NameATR3CMOS26000KPA
Sensor Diagonal28.3mm
LCG Read Noise2.4-1.14e-
HCG Read Noise2.15-1.16e-
Maximum SNR47.1dB
Frame Buffer512MB
Sensor Chamber WindowAdjustable heating window
Back Focal Distance17.5mm/12.5mm
Protective WindowIR/AR
Color Filter ArrayRGGB
DDR3 Buffer512MB
Max ExposureUp to 1 hour
Power SupplyDC 12V / 3A

Technical media

Performance graphs and technical drawings

Official sensor-response, performance, and mechanical imagery for the ATR2600C.

ATR2600C HCG mode performance chart
ATR2600C HCG mode performance chart
ATR2600C HCG mode settings
ATR2600C HCG mode settings
ATR2600C parameters overview
ATR2600C parameters overview

System integration

Integration and compatibility

Use these checks to connect ATR2600C to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Lens and microscope interface
Mount: M42 / M54 astronomy adapters
Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.
Sensor and sampling
Sensor: Sony IMX571 color CMOS · Sensor Type: Back-illuminated APS-C color CMOS
Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.
Interface and data rate
Frame Rate: 13.3 fps · Interface: USB 3.0
Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.
Cooling and noise floor
Dynamic Range: 86.8 dB · Read Noise: 2.77–0.79 e⁻
Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Technical FAQ

Integration questions for ATR2600C

What lens mount is required for the ATR2600C?

Mount: M42 / M54 astronomy adapters. Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.

What sensor and pixel pitch does the ATR2600C use?

Sensor: Sony IMX571 color CMOS · Sensor Type: Back-illuminated APS-C color CMOS. Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.

How does the ATR2600C connect to the acquisition computer?

Frame Rate: 13.3 fps · Interface: USB 3.0. Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.

What is the noise performance of the ATR2600C?

Dynamic Range: 86.8 dB · Read Noise: 2.77–0.79 e⁻. Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Need help choosing?

Tell us your sensor, resolution, spectral range, frame-rate, interface, and software requirements and we will confirm the matching configuration and lead time.

Open camera finder

Model selection

Nearby series comparison

Compare ATR2600C with the closest available models in the ATR DSO cooled family.

Selection parameterATR2600C (current)ATR2110CATR2600M
SensorSony IMX571 color CMOSSmartSens SC2110 color CMOSSony IMX571 monochrome CMOS
Resolution26 MP (6224 × 4168)2.3 MP (1920 × 1200)26 MP (6224 × 4168)
Sensor sizeAPS-C, 23.4 × 15.7 mmAPS-C class, 23.2 × 14.6 mmAPS-C, 23.4 × 15.7 mm
Pixel size / frame rate3.76 µm12 µm3.76 µm

Other cameras on the IMX571 sensor

The IMX571 appears in 16 models across the catalogue, differing in cooling, shutter, interface and colour filter. Compare them side by side before settling on a variant.