Server-rendered product directory
Lasers model catalog
Browse 3,778 canonical product destinations across 12 product families. Page 7 lists models 721–840.
- Laser modelsFC-D-400400 nm Spectrum Analysis400 nm | output 1~100 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-405405 nm Spectrum Analysis405 nm | output 1~100 mW | linewidth <0 nm. 06View product →
- Laser modelsFC-D-405410 nm Spectrum Analysis410 nm | output 1~100 mW | linewidth <0 nm. 06View product →
- Laser modelsFC-D-410410 nm CW LasersThe FC-D-410 is a 410 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-D-442442 nm Spectrum Analysis442 nm | output 1~450 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-444444 nm Single-Frequency LasersThe FC-D-444 is a 444 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-D-445445 nm Spectrum Analysis445 nm | output 1~450 mW | Min. spectral linewidth 0.06 nm FC-D-445/ 1~450mW Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-488488 nm CW LasersThe FC-D-488 is a 488 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-D-514.5514.5 nm CW LasersThe FC-D-514.5 is a 514.5 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-D-520520 nm Spectrum Analysis520 nm | output 1~30 mW | Green Laser for Raman SpectroscopyView product →
- Laser modelsFC-D-633633 nm Spectrum Analysis633 nm | output 1~40 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-635635 nm CW LasersThe FC-D-635 is a 635 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-D-637637 nm CW LasersThe FC-D-637 is a 637 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-D-639639 nm CW LasersThe FC-D-639 is a 639 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-D-660660 nm CW LasersThe FC-D-660 is a 660 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-D-690690 nm CW LasersThe FC-D-690 is a 690 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-D-730730 nm Spectrum Analysis730 nm | output 1~450 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-780780 nm Spectrum Analysis780 nm | output 1~450 mW | Min. linewidth 0.06 nmView product →
- Laser modelsFC-D-785785 nm Spectrum Analysis785 nm | output 1~450 mW | Min. linewidth 0.06 nmView product →
- Laser modelsFC-D-808808 nm Spectrum Analysis808 nm | output 1~450 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-830830 nm Spectrum Analysis830 nm | output 1~500 mW | Min. spectral linewidth 0.03 nmView product →
- Laser modelsFC-D-852852 nm Spectrum Analysis852 nm | output 1~100 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-975975 nm Spectrum Analysis975 nm | output 1~450 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-976976 nm Spectrum Analysis976 nm | output 1~450 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-D-980980 nm Spectrum Analysis980 nm | output 1~450 mW | Min. spectral linewidth 0.06 nmView product →
- Laser modelsFC-E-635635 nm CW LasersThe FC-E-635 is a 635 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-EN-532532 nm CW LasersThe FC-EN-532 is a 532 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-EW-532532 nm CW LasersThe FC-EW-532 is a 532 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-10301030 nm CW LasersThe FC-OEM-1030 is a 1030 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-10601060 nm CW LasersThe FC-OEM-1060 is a 1060 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-1064-A1064 nm CW LasersThe FC-OEM-1064-A is a 1064 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-1064-B1064 nm CW LasersThe FC-OEM-1064-B is a 1064 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-10801080 nm Fiber LasersThe FC-OEM-1080 is a 1080 nm fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment.View product →
- Laser modelsFC-OEM-12501250 nm Fiber LasersThe FC-OEM-1250 is a 1250 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-12681268 nm Fiber LasersThe FC-OEM-1268 is a 1268 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-12701270 nm CW LasersThe FC-OEM-1270 is a 1270 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-12731273 nm Fiber LasersThe FC-OEM-1273 is a 1273 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-12901290 nm Fiber LasersThe FC-OEM-1290 is a 1290 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13051305 nm Fiber LasersThe FC-OEM-1305 is a 1305 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13091309 nm Fiber LasersThe FC-OEM-1309 is a 1309 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13101310 nm CW LasersThe FC-OEM-1310 is a 1310 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13121312 nm Fiber LasersThe FC-OEM-1312 is a 1312 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13301330 nm Fiber LasersThe FC-OEM-1330 is a 1330 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13501350 nm Fiber LasersThe FC-OEM-1350 is a 1350 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13681368 nm Fiber LasersThe FC-OEM-1368 is a 1368 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13701370 nm Fiber LasersThe FC-OEM-1370 is a 1370 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13901390 nm Fiber LasersThe FC-OEM-1390 is a 1390 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-13921392 nm Fiber LasersThe FC-OEM-1392 is a 1392 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-14101410 nm Fiber LasersThe FC-OEM-1410 is a 1410 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-14301430 nm Fiber LasersThe FC-OEM-1430 is a 1430 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-14501450 nm Fiber LasersThe FC-OEM-1450 is a 1450 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-14701470 nm CW LasersThe FC-OEM-1470 is a 1470 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-14901490 nm CW LasersThe FC-OEM-1490 is a 1490 nm continuous-wave laser source. Tuning changes the selected output wavelength so spectral features can be scanned with the same source. The tuning band specifies which lines can be reached; linewidth describes the width of the selected line.View product →
- Laser modelsFC-OEM-15101510 nm Fiber LasersThe FC-OEM-1510 is a 1510 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-15121512 nm Fiber LasersThe FC-OEM-1512 is a 1512 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-15301530 nm Fiber LasersThe FC-OEM-1530 is a 1530 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-15321532 nm CW LasersThe FC-OEM-1532 is a 1532 nm continuous-wave laser source. Tuning changes the selected output wavelength so spectral features can be scanned with the same source. The tuning band specifies which lines can be reached; linewidth describes the width of the selected line.View product →
- Laser modelsFC-OEM-15401540 nm CW LasersThe FC-OEM-1540 is a 1540 nm continuous-wave laser source. Tuning changes the selected output wavelength so spectral features can be scanned with the same source. The tuning band specifies which lines can be reached; linewidth describes the width of the selected line.View product →
- Laser modelsFC-OEM-15501550 nm CW LasersThe FC-OEM-1550 is a 1550 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-15601560 nm Pulsed LasersThe FC-OEM-1560 is a 1560 nm pulsed laser source. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample.View product →
- Laser modelsFC-OEM-15681568 nm Fiber LasersThe FC-OEM-1568 is a 1568 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-15701570 nm Fiber LasersThe FC-OEM-1570 is a 1570 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-15731573 nm CW LasersThe FC-OEM-1573 is a 1573 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-15801580 nm Fiber LasersThe FC-OEM-1580 is a 1580 nm laser source. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-16581658 nm Fiber LasersThe FC-OEM-1658 is a 1658 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-17421742 nm Fiber LasersThe FC-OEM-1742 is a 1742 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-405405 nm CW LasersThe FC-OEM-405 is a 405 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-410410 nm CW LasersThe FC-OEM-410 is a 410 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-442442 nm CW LasersThe FC-OEM-442 is a 442 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-445445 nm CW LasersThe FC-OEM-445 is a 445 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-447447 nm CW LasersThe FC-OEM-447 is a 447 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-450450 nm CW LasersThe FC-OEM-450 is a 450 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-460460 nm CW LasersThe FC-OEM-460 is a 460 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-488488 nm CW LasersThe FC-OEM-488 is a 488 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-505505 nm CW LasersThe FC-OEM-505 is a 505 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-514.5514 nm CW LasersThe FC-OEM-514.5 is a 514 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-520520 nm CW LasersThe FC-OEM-520 is a 520 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-633633 nm CW LasersThe FC-OEM-633 is a 633 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-637637 nm CW LasersThe FC-OEM-637 is a 637 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-640640 nm CW LasersThe FC-OEM-640 is a 640 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-642642 nm CW LasersThe FC-OEM-642 is a 642 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-650650 nm CW LasersThe FC-OEM-650 is a 650 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-660660 nm CW LasersThe FC-OEM-660 is a 660 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-670670 nm CW LasersThe FC-OEM-670 is a 670 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-680680 nm CW LasersThe FC-OEM-680 is a 680 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-685685 nm CW LasersThe FC-OEM-685 is a 685 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-705705 nm CW LasersThe FC-OEM-705 is a 705 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-730730 nm CW LasersThe FC-OEM-730 is a 730 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-780780 nm CW LasersThe FC-OEM-780 is a 780 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-785-A785 nm CW LasersThe FC-OEM-785-A is a 785 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-785-B785 nm CW LasersThe FC-OEM-785-B is a 785 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-790790 nm CW LasersThe FC-OEM-790 is a 790 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-808808 nm CW LasersThe FC-OEM-808 is a 808 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-830-A830 nm CW LasersThe FC-OEM-830-A is a 830 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-830-B830 nm CW LasersThe FC-OEM-830-B is a 830 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-852852 nm CW LasersThe FC-OEM-852 is a 852 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-880880 nm CW LasersThe FC-OEM-880 is a 880 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-905905 nm CW LasersThe FC-OEM-905 is a 905 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-OEM-937937 nm CW LasersThe FC-OEM-937 is a 937 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-940940 nm CW LasersThe FC-OEM-940 is a 940 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-975975 nm CW LasersThe FC-OEM-975 is a 975 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-976-A976 nm CW LasersThe FC-OEM-976-A is a 976 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-976-B976 nm CW LasersThe FC-OEM-976-B is a 976 nm continuous-wave laser source. Continuous-wave operation provides a sustained beam for experiments that need steady illumination. Output power describes the optical energy delivered per second. At the sample, irradiance also depends on the beam area and losses through the optical path, so the delivered spot must be considered along with the source rating.View product →
- Laser modelsFC-OEM-980980 nm Pulsed LasersThe FC-OEM-980 is a 980 nm pulsed laser source. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample.View product →
- Laser modelsFC-W-1060B1060 nm Fiber LasersThe FC-W-1060B is a 1060 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1208H1208 nm Application SystemsThe FC-W-1208H is a 1208 nm fiber-coupled laser source. The laser output is coupled into an optical fiber for delivery to the experiment. The fiber core, numerical aperture and connector determine compatibility with the receiving optics.View product →
- Laser modelsFC-W-1270H1270 nm Fiber LasersThe FC-W-1270H is a 1270 nm direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1320B1320 nm Fiber LasersThe FC-W-1320B is a 1320 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1320H1320 nm Application SystemsThe FC-W-1320H is a 1320 nm fiber-coupled laser source. The laser output is coupled into an optical fiber for delivery to the experiment. The fiber core, numerical aperture and connector determine compatibility with the receiving optics.View product →
- Laser modelsFC-W-1380H1380 nm Application SystemsThe FC-W-1380H is a 1380 nm fiber-coupled laser source. The laser output is coupled into an optical fiber for delivery to the experiment. The fiber core, numerical aperture and connector determine compatibility with the receiving optics.View product →
- Laser modelsFC-W-1470H1470 nm Application SystemsThe FC-W-1470H is a 1470 nm fiber-coupled laser source. The laser output is coupled into an optical fiber for delivery to the experiment. The fiber core, numerical aperture and connector determine compatibility with the receiving optics.View product →
- Laser modelsFC-W-1532H1532 nm Application SystemsThe FC-W-1532H is a 1532 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1550H1550 nm Application SystemsThe FC-W-1550H is a 1550 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1600H1600 nm Application SystemsThe FC-W-1600H is a 1600 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1710H1710 nm Fiber LasersThe FC-W-1710H is a 1710 nm direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength.View product →
- Laser modelsFC-W-1720B1720 nm Application SystemsThe FC-W-1720B is a 1720 nm fiber-coupled laser source. The laser output is coupled into an optical fiber for delivery to the experiment. The fiber core, numerical aperture and connector determine compatibility with the receiving optics.View product →
- Laser modelsFC-W-1870H1870 nm Application SystemsThe FC-W-1870H is a 1870 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1908B1908 nm Fiber LasersThe FC-W-1908B is a 1908 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1920H1920 nm Application SystemsThe FC-W-1920H is a 1920 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →
- Laser modelsFC-W-1940H1940 nm Application SystemsThe FC-W-1940H is a 1940 nm continuous-wave direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command. The specified fiber connection delivers the generated light to the experiment; its core size, numerical aperture and connector need to match the receiving optics.View product →