Laser Diodes & Sources
The SUPL is a Turn-Key single-mode supercontinuum ASE source providing continuous emission from 450 to 2300 nm, with up to 7 W average output power and power stability better than 0.5% RMS. The system uses a 1060 nm pulsed fiber laser to pump a photonic crystal fiber (PCF), producing a spatially coherent, diffraction-limited beam across the entire spectral range. The SUPL delivers highly stable linear polarization, featuring an extinction ratio of up to 35 dB with minimal sensitivity to time or temperature variations, making it an ideal polarized broadband light source for demanding applications. Available as a ready-to-use benchtop unit, the SUPL offers two repetition-rate configurations: 100 kHz and 4 MHz with pulse duration of 100ns and 10ns, respectively. Shorter pulses generate lighter in the blue spectral.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Config: Standard · Total Output Power: 3W · Interface: Non · Repetition: < 100 kHz · Isolator: Non · Output: Photonic Fiber · Connector: None · Collimator: Non
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Supercontinuum Laser / Light, Single Mode, 450-2200 nm, Fiber Coupled: Laboratory optical integration depends on preserving the optical budget through the complete path.. The fiber/interface entry (None, FC/PC, Special) must match the connected components.
Supercontinuum Laser / Light, Single Mode, 450-2200 nm, Fiber Coupled: Fiber-optic instrumentation depends on preserving the optical budget through the complete path.. The fiber/interface entry (None, FC/PC, Special) must match the connected components.
Downloads
System integration
Use these checks to connect Supercontinuum Laser / Light, Single Mode, 450-2200 nm, Fiber Coupled to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Interface: Non, USB, RS232, Special · Connector: None, FC/PC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Supercontinuum Laser / Light, Single Mode, 450-2200 nm, Fiber Coupled with the closest available models in the Laser Diodes & Sources family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Supercontinuum Laser / Light, Single Mode, 450-2200 nm, Fiber Coupled (current) | Super Luminescent Light Emitting Diode (SLED) | Superluminescent (SLED) Light Source |
|---|---|---|---|
| Wavelength range | Confirm for this model | 850nm, 1060nm, 1310nm, 1450nm, 1550nm, 1600nm, 1650nm, 930nm | 830nm, 1060nm, 1310nm, 1450nm, 1550nm, 1600nm, 1650nm, 930nm, 780nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | SM28, PM1310, PM1550, Hi1060, PM1950, PM980, PM850, SM800, 780HP, PM780 | SM28, PM1310, PM1550, Hi1060, PM1950, PM980, PM850, SM800, 780HP, PM780 |
| Connector / control | Non, USB, RS232, Special | None, FC/APC, Special | FC/APC |
