Laser Diodes & Sources
Superluminescent (SLED) Light Source
The Fiber-Coupled SLD Source is designed for easy coupling and straightforward control of a superluminescent diode (SLD). Each system is equipped with a single FC/APC connector output, and the drive electronics incorporate high-precision, low-noise auto-feedback to ensure constant output power. A temperature control unit is integrated to maintain optimal operating conditions. The user interface features an intuitive LCD display, allowing independent control of output power and temperature settings by the two front rotating knobs. The SLDS includes a universal power supply that supports operation from 100 to 240 VAC without requiring manual voltage selection, and is supplied with both US and European standard line cords. Convenient fuse access is located on the rear panel.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 830nm · Output Power: 1mW · Output Polarization: Random · Package: Benchtop · Fiber Type: SM28 · Configuration: Standard · Connector: FC/APC
System integration
Integration and compatibility
Use these checks to connect Superluminescent (SLED) Light Source to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SM28, PM1310, PM1550, Hi1060, PM1950, PM980, PM850, SM800, 780HP, PM780 · Connector: FC/APC
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 830nm, 1060nm, 1310nm, 1450nm, 1550nm, 1600nm, 1650nm, 930nm, 780nm
- Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Superluminescent (SLED) Light Source
Which fiber and connector does the Superluminescent (SLED) Light Source use?
Fiber Type: SM28, PM1310, PM1550, Hi1060, PM1950, PM980, PM850, SM800, 780HP, PM780 · Connector: FC/APC. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Superluminescent (SLED) Light Source be included in an optical power budget?
Wavelength: 830nm, 1060nm, 1310nm, 1450nm, 1550nm, 1600nm, 1650nm, 930nm, 780nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Superluminescent (SLED) Light Source with the closest available models in the Laser Diodes & Sources family.
| Selection parameter | Superluminescent (SLED) Light Source (current) | Supercontinuum Laser / Light, Single Mode, 450-2200 nm, Fiber Coupled | Ultra High PER PM Fiber Coupled Laser 1060nm |
|---|---|---|---|
| Wavelength range | 830nm, 1060nm, 1310nm, 1450nm, 1550nm, 1600nm, 1650nm, 930nm, 780nm | — | 1060nm |
| Fiber type | SM28, PM1310, PM1550, Hi1060, PM1950, PM980, PM850, SM800, 780HP, PM780 | — | PM980 |
| Connector / control | FC/APC | None, FC/PC, Special | None, FC/APC, Special |
