Laser Diodes & Sources
485nm Butterfly Laser Diode
The 485nm series laser diodes are fabricated in a hermetically sealed 14-pin butterfly package. The laser diodes contain a thermoelectric cooler (TEC), and a thermistor to secure high-quality laser performance. The Laser Diodes Wavelength of 485±10nm, Output power: ≥20mW, Pigtail Type: 405-HP(Nufern) fiber with 900um loose tube, 1.0+/-0.1m, FC/APC connector. Our laser products are Telcordia GR-468 qualified and in compliance with RoHS Directives.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 485nm · Output Power: 20mW · PD: None · Fiber Type: SM400 · Fiber Buffer: 900µm Tube · Fiber Length: 0.5m · Connector: FC/APC
Downloads
Datasheets & documents
System integration
Integration and compatibility
Use these checks to connect 485nm Butterfly Laser Diode to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SM400, SM450, PM400, PM460 · Fiber Buffer: 900µm Tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 485nm
- Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 485nm Butterfly Laser Diode
Which fiber and connector does the 485nm Butterfly Laser Diode use?
Fiber Type: SM400, SM450, PM400, PM460 · Fiber Buffer: 900µm Tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 485nm Butterfly Laser Diode be included in an optical power budget?
Wavelength: 485nm. Check the Laser Diodes & Sources passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 485nm Butterfly Laser Diode with the closest available models in the Laser Diodes & Sources family.
| Selection parameter | 485nm Butterfly Laser Diode (current) | 480nm Fiber Coupled FP Laser Source - 20mW | 485nm Fiber Coupled FP Laser Source |
|---|---|---|---|
| Wavelength range | 485nm | 480nm | 485nm |
| Fiber type | SM400, SM450, PM400, PM460 | SM400, SM450, PM400, PM460 | SM400, SM450, PM400, PM460 |
| Connector / control | FC/APC, Special | Non, FC/APC, FC/PC, Special | Non, FC/APC, FC/PC, Special |
